A.03.09 L26-8 Two socket cross.pdf

L25 Three Socket Tee Commonly used as the 90° joint between the top rail and an intermedi-ate upright on safety railing. As there are two socket set screws in the sleeve, required in the horizontal pipe. The alternative when a join in the pipe is not required.

A

E

A

A type pipe ref measurements (in.) weight (lb.)

A D E F G

G

D

F

L26 Two Socket Cross Usually paired with type L25 to give a 90° joint between the middle rail and an intermediate upright on safety railing. The upright passes through the

A

A A

F

E

D type pipe reference measurements (in.)

weight (lb.)

A D E F

L29 30°-60° Single Socket Tee quently used for struts and braces. It can be used at any selected angle between 30° and 60°. Suitable for connecting an angled staircase rail to a vertical upright.

A

A

G D

E

F type pipe measurements (in.)

weight (lb.)

A D E F G

30°-60°

L30 30°-45° Adjustable Cross for railing on staircases between the mid-rail and intermediate upright which is required to remain vertical. It can be used at any selected angle between 30° and 45°.

A

A A

E

D

F type pipe reference measurements (in.)

weight (lb.)

A D E F

30°-45°

L35 Three Socket Cross Most frequently used to tie uprights with horizontal pipe in three directions, all 90° to the upright. The upright

A

A

A

G F

D

E type pipe ref. measurements (in.)

weight (lb.)

A D E F G

L45 Crossover Designed to give a 90° offset crossover joint. Frequently used on safety railing utilizing a continuous horizontal rail, minimizing pipe cuts to reduce costs.

Type L45 may also be used to allow intermediate levels on racks.

Note: Pipe cannot be joined with this

A

A

E

D type pipe reference measurements (in.)

weight (lb.)

A B C D E F g2oddjma Highlight