A.03.09 L10-8 and L15-8 railing components Elbow and TEE.pdf
PDF 234 KB Posted
- Attached to
- TDA -Aluminum Handrail and Connector Components
- Solicitation number
- W9127N22Q0152
View the file
Other files
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
L10 type pipe ref. measurements (in.)
weight (lb.)
A D E F
Single Socket Tee Designed to give a 90° butt joint between two pipes. Frequently used for the joint between end uprights and the middle rail where the railing site is straight and level. Also used for base used where the pipe through sleeve ‘A’ is
A
A
F
D
E
L14 type pipe ref. measurements (in.)
weight (lb.)
A D E F
Straight Coupling Designed to give an in-line joint between pipes of the same size. Frequently used to enable full pipe lengths to be used in railing applications.
Note: It is not advisable to join the upper and lower rails of a railing within the same bay.
AA
F
D
E
L15 type pipe reference measurements (in.)
weight (lb.)
A D E F
90° Elbow A 90° elbow joint, most frequently used as an end joint for the top rail of safety railing on a level site.
A
A
F
D
E
60°-200°
L19 type pipe ref. measurements (in.)
weight (lb.)
A D E
Adjustable Side Outlet Tee Used to form variable angle joints be-tween 60 and 200°.
and are weighed, priced, and sold as such.
A A
D
E
A
L20 type pipe reference measurements (in.)
weight (lb.)
A D E F
Side Outlet Elbow A 90° corner joint most frequently used for the top rail of safety railing. It can also be used for the corner joint of benches, work tables, and other rectan-gular structures.
A
A
F
D
E
A
L21 type pipe reference measurements (in.)
weight (lb.)
A D E F
90° Side Outlet Tee Most frequently paired with type L20 to give a 90° corner joint for the middle rail of safety railing and other rectan-gular structures. The upright passes
A
A
F
D
E
A g2oddjma Highlight g2oddjma Highlight
File details come from the government source that posted it. Updated .