A.02 Purchase Description - Suction Pipe for Yaquina.pdf
PDF 313 KB Posted
- Attached to
- Procure Suction Pipe for the Dredge Yaquina
- Solicitation number
- W9127N24Q0052
About this file
This solicitation seeks quotes to procure suction pipes for a dredge. The U.S. Army Corps of Engineers Engineering District Portland is requesting four in-board pipes and six drag arm pipes of various sizes for the Dredge Yaquina. This procurement is set aside for small businesses only and classified under NAICS code 331210 with a size standard of 1,000 employees. Quotes are due by the date and time specified and should be emailed to the points of contact listed. Offerors must be registered in the System for Award Management to receive an award. The solicitation and product description are attached. Any questions should be directed to the named point of contact by email. The government will use only the internet to communicate amendments to this solicitation. Contact information is provided for small business assistance.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| B.01 Amended CombinedSynopsisSolicitation.pdf | ||
| A.03 Specification Questions and Answers.docx | DOCX document | |
| B.01 CombinedSynopsisSolicitation.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Product Description – Procure Suction Pipe for Yaquina
01. General
Provide all labor, materials, equipment, and transportation to procure two (2) in-board suction pipes in the length of 12 feet and two (2) in-board suction pipes in the length of 13ft. All pipes shall be 1” (1 inch) thickness, 20 inches I.D., and ASTM A-36 rolled steel plate. The final O.D. shall be 22 inches.
Provide all labor, materials, equipment, and transportation to procure two (2) drag arm pipes in the length of 21ft 3inches, two (2) drag arm pipes in the length of 13ft 10inches, and two (2) drag arm pipes in the length of 13ft 7inches feet. All pipes shall be 3/4” (.75 inch) thickness, 20 inches I.D., and ASTM A-36 rolled steel plate. The final O.D. shall be 21.5inches.
02. References
Technical Standards:
AWS- American Welding Society SWPS- Standard Welding Procedure Specifications
03. Submittals
Contractor shall provide a quality control report. The report shall include: materials test reports, tolerance report for each pipe, and photos of completed products.
04. Specifications
Provide all labor, materials, equipment, and transportation to procure two (2) in-board suction pipes in the length of 12 feet and two (2) in-board suction pipes in the length of 13ft. All pipes shall be 1” (1 inch) thickness, 20 inches I.D., and ASTM A-36 rolled steel plate. The final O.D. shall be 22 inches.
Provide all labor, materials, equipment, and transportation to procure two (2) drag arm pipes in the length of 21ft 3inches, two (2) drag arm pipes in the length of 13ft 10inches, and two (2) drag arm pipes in the length of 13ft 7inches feet. All pipes shall be 3/4” (.75 inch) thickness, 20 inches I.D., and ASTM A-36 rolled steel plate. The final O.D. shall be 21.5inches.
Each pipe shall be formed in one (1) piece with one (1) longitudinal seam only (no girth welds). Welded pipes shall be rolled with a continuous welded seam. All welding shall be performed in accordance with AWS D1.1. The roundness of the pipes shall be within +/- 1/8.
Pipes shall be delivered to USACE Portland, 8010 NW St. Helens Road Portland, OR 97210.
In-Board suction pipes
QUANTITY 2 - The pipe shall be formed in one (1) piece with one (1) longitudinal seam only (no girth welds). The overall length for each suction pipe is 12ft. All pipes shall be 1” (1 inch) thickness, 20 inches I.D., and ASTM A-36 rolled steel plate. The final O.D. shall be 22 inches.
QUANTITY 2 - The pipe shall be formed in one (1) piece with one (1) longitudinal seam only (no girth welds). The overall length for each suction pipe is 13ft. All pipes shall be 1” (1 inch) thickness, 20 inches I.D., and ASTM A-36 rolled steel plate. The final O.D. shall be 22 inches.
Drag Arm pipes
QUANTITY 2 - The pipe shall be formed in one (1) piece with one (1) longitudinal seam only (no girth welds). The overall length for each suction pipe is 13ft 10in. All pipes shall be 3/4” (.75 inch) thickness, 20 inches I.D., and ASTM A-36 rolled steel plate. The final O.D. shall be 21.5inches.
QUANTITY 2 - The pipe shall be formed in one (1) piece with one (1) longitudinal seam only (no girth welds). The overall length for each suction pipe is 13ft 7in. All pipes shall be 3/4” (.75 inch) thickness, 20 inches I.D., and ASTM A-36 rolled steel plate. The final O.D. shall be 21.5inches.
QUANTITY 2 - The pipe shall be formed in one (1) piece with one (1) longitudinal seam only (no girth welds). The overall length for each suction pipe is 21ft 3in. All pipes shall be 3/4” (.75 inch) thickness, 20 inches I.D., and ASTM A-36 rolled steel plate. The final O.D. shall be 21.5inches.
05. Inspection
COR will inspect pipes before delivery.
06. Testing
If weld seams do not pass a visual inspection, ultrasonic NDT testing may be required to ensure quality.
File details come from the government source that posted it. Updated .