920-2(1).xls

This is a specifications document for a standard cab, 18-foot aluminum dry-freight truck with a tuck-away style liftgate, classified as Item 29 under CLASS/SPEC# 920-2. The truck must be equipped with a diesel engine (minimum 6.4 liter), automatic transmission, and air conditioning. Key specifications include a minimum 26,000-pound GVWR, 17,000-pound minimum payload capacity, 206-inch wheelbase, dual 750 CCA batteries, 100-amp alternator, air-operated 4-wheel ABS brakes with engine exhaust brake, power steering with tilt wheel, and cruise control. The truck body features a 1-3/8-inch laminated hardwood floor, white aluminum exterior walls with steel hat side posts, aluminum roof with crowned bow design, roll-up sealed rear door with cam-type latch, and exterior dimensions of 18'-6" long by 8' wide by 7'-6" high, not to exceed 11'-6" total height. Interior specifications include a cloth high-back bucket driver's seat with air operation, two-person passenger seat with under-seat storage, ceiling-mounted dome and courtesy lights, tinted glass, AM/FM radio with clock, and full insulation with noise barriers.

The liftgate specifications require a tuck-away style aluminum platform lift with 4,000-pound capacity, push-button controls mounted inside and outside the right rear of the body, and a hand-held corded remote with wall bracket. The liftgate must operate via power up/down with twin cylinders and include an 84-inch by 60-inch aluminum platform with a 6-inch ramp that maintains level ride. Additional requirements include an electric over hydraulic weatherproof power unit, a master disconnect switch in the driver's side cab with 135-amp circuit breaker, backup alarm of 97 decibels minimum, new flush mount stop/tail/backup lights installed in corner posts, and maintenance provisions including grease fittings on all pins, shafts, and hinges. All electrical connections must be sealed with heat shrink, with no "Scotch-Lok" style connectors permitted. The bidder must state the specific liter engine size and tire size and load range in their proposal. The document includes fields for year, make, model, quantity, unit cost, total cost, bidder/vendor information, and contact person details.