HC102825R0060.pdf

1 MB Posted

Attached to
JITC BOLT FY25 Cabling and IT Supply Requirement
Solicitation number
832572409
Issued by

About this file

Written by GovTribe AI ·

This document is a Solicitation/Contract/Order for Commercial Items (Standard Form 1449) for the Defense Information Systems Agency (DISA) Joint Interoperability Test Command (JITC). The solicitation seeks brand name or equal cabling, Information Technology (IT), and office supplies for JITC's testing laboratory at Fort Meade, Maryland, with a total small business set-aside under NAICS code 339940. The procurement includes over 30 line items of equipment such as poly box trucks, cable patch cords, network interface modules, USB cables, disk burners, storage boxes, printer supplies, power cables, and various other technical and office supplies.

The solicitation (No. HC102825R0060) was issued on 24-Jul-2025, with proposals due by 02:00 PM on 07 Aug 2025. The required delivery date is 90 days after receipt (ARO), with delivery to Matthew Fanning at 6906 Cooper Avenue, Fort Meade, MD 20755. The contract will be awarded on a Lowest Price Technically Acceptable (LPTA) basis, with offerors required to have active System for Award Management (SAM) registration, provide a unique item identifier for items, and complete specific representations and certifications. The total small business set-aside indicates that only small businesses are eligible to compete for this requirement.

View the file

Other files

File Type Posted
Attachment 1-EPLS.xlsx XLSX spreadsheet
832572409- Questions and Answers.docx DOCX document
Attachment 1-EPLS (final).xlsx XLSX spreadsheet

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file
Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

SEE ADDENDUM

(No Collect Calls)

HC102825R0060 24-Jul-2025

b. TELEPHONE NUMBER

1-667-891-0761

8. OFFER DUE DATE/LOCAL TIME

02:00 PM 07 Aug 2025

5. SOLICITATION NUMBER 6. SOLICITATION ISSUE DATE

AUTHORIZED FOR LOCAL REPRODUCTION

PREVIOUS EDITION IS NOT USABLE

STANDARD FORM 1449 (REV. 2/2012)

Prescribed by GSA – FAR (48 CFR) 53.212

(TYPE OR PRINT)

(SIGNATURE OF CONTRACTING OFFICER)

ADDENDA ARE

26. TOTAL AWARD AMOUNT (For Gov t. Use Only )

23.

CODE 10. THIS ACQUISITION IS

SUCH ADDRESS IN OFFER

17b. CHECK IF REMITTANCE IS DIFFERENT AND PUT

BELOW IS CHECKED

TELEPHONE NO.

HC10289. ISSUED BY

18b. SUBMIT INVOICES TO ADDRESS SHOWN IN BLOCK 18a. UNLESS BLOCK

7. FOR SOLICITATION

INFORMATION CALL:

a. NAME

MARK E. KRAFT

2. CONTRACT NO. 3. AWARD/EFFECTIVE DATE 4. ORDER NUMBER

(TYPE OR PRINT)

30b. NAME AND TITLE OF SIGNER 30c. DATE SIGNED 31b. NAME OF CONTRACTING OFFICER

30a. SIGNATURE OF OFFEROR/CONTRACTOR 31a.UNITED STATES OF AMERICA

27a. SOLICITATION INCORPORATES BY REFERENCE FAR 52.212-1. 52.212-4. FAR 52.212-3. 52.212-5 ARE ATTACHED.

25. ACCOUNTING AND APPROPRIATION DATA

1. REQUISITION NUMBER

20.

ADDITIONAL SHEETS SUBJECT TO THE TERMS AND CONDITIONS SPECIFIED.

OFFEROR TO COMPLETE BLOCKS 12, 17, 23, 24, AND 30

SOLICITATION/CONTRACT/ORDER FOR COMMERCIAL ITEMS

ARE NOT ATTACHED

27b. CONTRACT/PURCHASE ORDER INCORPORATES BY REFERENCE FAR 52.212-4. FAR 52.212-5 IS ATTACHED. ADDENDA ARE ARE NOT ATTACHED

(BLOCK 5), INCLUDING ANY ADDITIONS OR CHANGES WHICH ARE

SET FORTH HEREIN, IS ACCEPTED AS TO ITEMS:

. YOUR OFFER ON SOLICITATION

28. CONTRACTOR IS REQUIRED TO SIGN THIS DOCUMENT AND RETURN

% FOR:SET ASIDE:UNRESTRICTED OR X

SMALL BUSINESSX

17a.CONTRACTOR/ CODE FACILITY

OFFEROR CODE

DISA/DITCO-SCOTT-PL83

2300 EAST DRIVE, BUILDING 3600

SCOTT AFB IL 62225-5406

18a. PAYMENT WILL BE MADE BY CODE

RATED ORDER UNDER

DPAS (15 CFR 700)

13a. THIS CONTRACT IS A

13b. RATING

CODE15. DELIVER TO CODE HC1046 16. ADMINISTERED BY

12. DISCOUNT TERMS11. DELIVERY FOR FOB DESTINA-

TION UNLESS BLOCK IS

MARKED

SEE SCHEDULE

14. METHOD OF SOLICITATION

RFQ IFB RFPX

DISA JITC

6906 COOPER AVENUE

FORT MEADE MD 20755

MATTHEW FANNING

TEL: 301-225-9232 FAX:

FAX:

TEL: SERVICE-DISABLED

VETERAN-OWNED

SMALL BUSINESS

8(A)

HUBZONE SMALL

BUSINESS

SIZE STANDARD:

NAICS:

339940

X

OFFER DATED

29. AWARD OF CONTRACT: REF.

DELIVER ALL ITEMS SET FORTH OR OTHERWISE IDENTIFIED ABOVE AND ON ANY

COPIES TO ISSUING OFFICE. CONTRACTOR AGREES TO FURNISH AND

EMAIL:

TEL:

31c. DATE SIGNED

SEE SCHEDULE

SCHEDULE OF SUPPLIES/ SERVICESITEM NO. QUANTITY UNIT UNIT PRICE AMOUNT

24.22.21.19.

WOMEN-OWNED SMALL BUSINESS (WOSB)

ELIGIBLE UNDER THE WOMEN-OWNED

SMALL BUSINESS PROGRAM

EDWOSB

32g. E-MAIL OF AUTHORIZED GOVERNMENT REPRESENTATIVE

SOLICITATION/CONTRACT/ORDER FOR COMMERCIAL ITEMS

(CONTINUED)

PAGE 2 OF63

ACCEPTED, AND CONFORMS TO THE CONTRACT, EXCEPT AS NOTED: ______________________________________________________

32a. QUANTITY IN COLUMN 21 HAS BEEN

RECEIVED INSPECTED

32b. SIGNATURE OF AUTHORIZED GOVERNMENT

REPRESENTATIVE

32c. DATE 32d. PRINTED NAME AND TITLE OF AUTHORIZED GOVERNMENT

REPRESENTATIVE

32e. MAILING ADDRESS OF AUTHORIZED GOVERNMENT REPRESENTATIVE 32f . TELEPHONE NUMBER OF AUTHORIZED GOVERNMENT REPRESENTATIVE

37. CHECK NUMBER

FINALPARTIALCOMPLETE

36. PAYMENT35. AMOUNT VERIFIED

CORRECT FOR

34. VOUCHER NUMBER

FINAL

33. SHIP NUMBER

PARTIAL

38. S/R ACCOUNT NUMBER 39. S/R VOUCHER NUMBER 40. PAID BY

41a. I CERTIFY THIS ACCOUNT IS CORRECT AND PROPER FOR PAYMENT

41b. SIGNATURE AND TITLE OF CERTIFYING OFFICER 41c. DATE

42a. RECEIVED BY (Print)

42b. RECEIVED AT (Location)

42c. DATE REC'D (YY/MM/DD) 42d. TOTAL CONTAINERS

STANDARD FORM 1449 (REV. 2/2012) BACK

Prescribed by GSA – FAR (48 CFR) 53.212

AUTHORIZED FOR LOCAL REPRODUCTION

PREVIOUS EDITION IS NOT USABLE

SEE SCHEDULE

20.

SCHEDULE OF SUPPLIES/ SERVICES

21.

QUANTITY UNIT

22. 23.

UNIT PRICE

24.

AMOUNT

19.

ITEM NO.

HC102825R0060

Section SF 1449 - CONTINUATION SHEET

JITC BOLT FY25 SUPPLIES

JITC BOLT FY25 Cabling and IT Supplies

CONTRACTOR REQUIRED

INFORMATION

CONTRACTOR

NAME

CONTRACTOR

POC Name:

POC Email:

POC Phone #:

CAGE Code

Unique Entity ID #

QTY

UNIT OF

ISSUE

UNIT

PRICE Total

Manufacturer

Name

Manufacturer Part

Number Description

ULINE H-1956G

Poly Box Truck - 20 Bushel, Green, 52" x 37" x 36" 1 EA

ULINE H-1956G

Poly Box Truck - 20 Bushel, Red, 52" x 37" x 36" 1 EA

Chief K1S120B

Universal Slat Wall Height-

Adjustable Swing Arm Mount, Black 30 EA

Dremel 4300-9/64

Dremel 4300 Variable speed 1.8 -

Amp Multipurpose Corded Rotary

Tool Kit 1 KT

SAFT LS 14500

LS14500 3.6 Volt 2600 mAh

Lithium AA Battery 200 EA

SAFT LS 14250

LS14250 - 3.6V Primary lithium-thionyl chloride (LLi-SSOCl2) 200 EA

Skilcraft 7520-01-422-0315 Black click pens (12 pack) 20 PK

SEM 647OILSHEET10 CD Shredder Oil Sheets 100 PK

FORMAX 8000-20

SHREDDER OIL - 1 GALLON (4

Pack) 2 PK

ULINE S-11678

Industrial Trash Liners - 55-60

Gallon, 2.5 Mil, Black, 75 count boxes 5 PK

CISCO C-NIM-2T

Cisco Network Interface Module -expansion module - 100Base-

FX/1000Base-X x 2 1 EA

NETALLY

LINKSOLUTIONS-

KT-4K

NetAlly LinkRunner at 4000

LinkSolutions Kit #2 2 KT

Dell 407-BCVF

Dell Networking Transceiver SFP+

10GBASE-T 30m, Gen3, Customer

Kit (407-BCVF) 24 EA

LANshack C8S-SPC-10-GN

CAT8 Plenum Green 10' Patch

Cords Snagless Boots (TAA) 20 EA

LANshack C8S-SPC-10-RD

CAT8 Plenum Red 10' Patch Cords

Snagless Boots (TAA) 20 EA

LANshack C8S-SPC-25-GN

CAT8 Plenum Green 25' Patch

Cords Snagless Boots (TAA) 20 EA

SYSTOR

SYSTEMS SYS-USB30100-31 Memory Drive Copier/Eraser 1 EA

C2G C2G-27329

USB A 3.0 (5GBPS) TO Mini B

CABLE 32 EA

MOSHI 99MO084002 USB-C TO USB-A CABLE; 3' 32 EA

STAR TECH USB3S2SAT3CB

SATA TO USB A CABLE - USB

3.0 32 EA

STAR TECH USB3SAUB3

USB A 3.0 (5GBPS) TO MICRO B

CABLE 32 EA

Pioneer BDR-XS07TUHD

6x Slot Loading Portable USB 3.1

Gen1(3.0) BD/DVD/CD Burner.

Supports 4k Ultra Hd Blu-Ray

Playback , BDXL™ And M-Disc™

Format. USB Bus Powered 10 EA

VERBATIM 97457

25PK Blu-Ray 25GB 6X

SPINDLE; 25-pack 16 PK

VERBATIM 95098

DVD+R RECORDABLE DISC,

4.7 GB, 16X, SPINDLE, SILVER,

100/PACK 4 PK

Sterilite 17571706

Sterilite Clearview Storage Box

With Latched Lid 17571706 - 66 Qt

(6pack) 8 PK

Barska CB12964

Key Lock Box; 100 Keys;

Adjustable 1 EA

Eapele B082V3WHNQ

Floor Cable Cover Protector, Heavy

Duty PVC Duct, 10' Roll 10 EA

ULINE H-2917

Adjustable Width Pallet Truck; 48 x 21 - 27"; Load Capacity 5,500 lbs. 2 EA

PrestoLifts C62A-15LC

Battery Powered Lift; Counter

Balanced; load height 62"; 30" long forks; Load capacity 1,000 lbs. 1 EA

HP C9383A

HP 72, (C9383A)

CYAN/MAGENTA PRINTHEAD 1 EA

HP C9384A

HP 72, (C9384A) MATTE

BLACK/YELLOW PRINTHEAD 1 EA

HP C9380A

HP 72, (C9380A) GRAY/PHOTO

BLACK PRINTHEAD 1 EA

HP C9403A

HP 72, (C9403A) Matte Black Ink

Cartridge 2 EA

HP C9370A

HP 72, (C9370A) Photo Black Ink

Cartridge 2 EA

HP C9371A

HP 72, (C9371A) Cyan Ink

Cartridge 2 EA

HP C9372A

HP 72, (C9372A) Magenta Ink

Cartridge 2 EA

HP C9373A

HP 72, (C9373A) Yellow Ink

Cartridge 2 EA

HP C9374A

HP 72, (C9374A) Gray Ink

Cartridge 2 EA

Tripp Lite P002-002

NEMA 5-15R to C14 Computer

AC Power Cable - 13A 50 EA

Zero Connect TAAP42D1-1-10GR

LC UPC to LC UPC, Multi-Mode, OM4, OFNP Plenum, Duplex, Green Jacket Color, 10Meter -

TAA 12 EA

Zero Connect TAAP12D1-1-01GR

LC UPC to LC UPC, Single Mode, OS2, OFNP Plenum, Duplex, Green Jacket Color, 1Meter - TAA 63 EA

Zero Connect TAAP12D1-1-02GR

LC UPC to LC UPC, Single Mode, OS2, OFNP Plenum, Duplex, Green Jacket Color, 2Meter - TAA 12 EA

Zero Connect TAAP12D1-1-03GR

LC UPC to LC UPC, Single Mode, OS2, OFNP Plenum, Duplex, Green Jacket Color, 3Meter - TAA 58 EA

Zero Connect TAAP12D1-1-05GR

LC UPC to LC UPC, Single Mode, OS2, OFNP Plenum, Duplex, Green Jacket Color, 5Meter - TAA 78 EA

Zero Connect TAAP12D1-1-07GR

LC UPC to LC UPC, Single Mode, OS2, OFNP Plenum, Duplex, Green Jacket Color, 7Meter - TAA 68 EA

Zero Connect TAAP12D1-1-10GR

LC UPC to LC UPC, Single Mode, OS2, OFNP Plenum, Duplex, Green Jacket Color, 10Meter -

TAA 64 EA

Zero Connect TAAP12D1-1-20GR

LC UPC to LC UPC, Single Mode, OS2, OFNP Plenum, Duplex, Green Jacket Color, 20Meter -

TAA 100 EA

Zero Connect TAAP12D1-1-30GR

LC UPC to LC UPC, Single Mode, OS2, OFNP Plenum, Duplex, Green Jacket Color, 30Meter -

TAA 39 EA

Zero Connect TAAP12D1-1-40GR

LC UPC to LC UPC, Single Mode, OS2, OFNP Plenum, Duplex, Green Jacket Color, 40Meter -

TAA 12 EA

Zero Connect TAAP12D3-3-30GR

SC UPC to SC UPC, Single Mode, OS2, OFNP Plenum, Duplex, Green Jacket Color, 30Meter -

TAA 15 EA

Zero Connect TAAP12D1-3-30GR

LC UPC to SC UPC, Single Mode, OS2, OFNP Plenum, Duplex, Green Jacket Color, 30Meter -

TAA 15 EA

Zero Connect TAAP12D1-3-20GR

LC UPC to SC UPC, Single Mode, OS2, OFNP Plenum, Duplex, Green Jacket Color, 20Meter -

TAA 30 EA

Zero Connect TAAP12D1-3-10GR

LC UPC to SC UPC, Single Mode, OS2, OFNP Plenum, Duplex, Green Jacket Color, 10Meter -

TAA 16 EA

Zero Connect TAAP12D1-3-10GR

LC UPC to SC UPC, Single Mode, OS2, OFNP Plenum, Duplex, Green Jacket Color, 3Meter - TAA 4 EA

Zero Connect TAAP12D1-3-10GR

LC UPC to SC UPC, Single Mode, OS2, OFNP Plenum, Duplex, Green Jacket Color, 2Meter - TAA 18 EA

Zero Connect TAAP42D3-3-30GR

SC UPC to SC UPC, Multi-Mode, OM4, OFNP Plenum, Duplex, Green Jacket Color, 30Meter -

TAA 20 EA

Zero Connect TAAP42D3-3-10GR

SC UPC to SC UPC, Multi-Mode, OM4, OFNP Plenum, Duplex, Green Jacket Color, 10Meter -

TAA 9 EA

Zero Connect TAAP42D3-3-07GR

SC UPC to SC UPC, Multi-Mode, OM4, OFNP Plenum, Duplex, Green Jacket Color, 7Meter - TAA 25 EA

Zero Connect TAAP42D1-3-10GR

LC UPC to SC UPC, Multi-Mode, OM4, OFNP Plenum, Duplex, Green Jacket Color, 10Meter -

TAA 29 EA

Zero Connect TAAP42D1-3-05RD

LC UPC to SC UPC, Multi-Mode, OM4, OFNP Plenum, Duplex, Red

Jacket Color, 5Meter - TAA 21 EA

Zero Connect TAAP42D1-3-01RD

LC UPC to SC UPC, Multi-Mode, OM4, OFNP Plenum, Duplex, Red

Jacket Color, 1Meter - TAA 22 EA

Zero Connect TAAP42D1-1-07RD

LC UPC to LC UPC, Multi-Mode, OM4, OFNP Plenum, Duplex, Red

Jacket Color, 7Meter - TAA 27 EA

Zero Connect TAAP42D1-1-05RD

LC UPC to LC UPC, Multi-Mode, OM4, OFNP Plenum, Duplex, Red

Jacket Color, 5Meter - TAA 3 EA

Zero Connect TAAP42D1-1-03RD

LC UPC to LC UPC, Multi-Mode, OM4, OFNP Plenum, Duplex, Red

Jacket Color, 3Meter - TAA 3 EA

Zero Connect TAAP42D1-1-02RD

LC UPC to LC UPC, Multi-Mode, OM4, OFNP Plenum, Duplex, Red

Jacket Color, 2Meter - TAA 17 EA

Zero Connect TAAP42D1-1-01RD

LC UPC to LC UPC, Multi-Mode, OM4, OFNP Plenum, Duplex, Red

Jacket Color, 1Meter - TAA 6 EA

Zero Connect MC64M5SB-SBF007

CAT6 Plenum Green 7' Patch

Cords Snagless Boots 100 EA

SUPERIOR

ESSEX 77-240-9B

Red CAT6e Plenum Cable, 23/4

Solid AC, CMP, 1000' box 14 BX

SUPERIOR

ESSEX 77-240-5B

Green CAT6e Plenum Cable, 23/4

Solid AC, CMP, 1000' box 4 BX

Total

REQUESTED

DELIVERY DATE: 90 days ARO

DELIVER ITEMS

TO:

Matthew Fanning; 6906 Cooper

Ave, Fort Meade MD, 20755-7086

Ship to Address:

6906 Cooper Ave, Fort Meade MD, 20755-7086

Point of Contact

(POC): Matthew Fanning

Office Name/Symbol:

Joint Interoperability Test

Command (JITC) JT5B

POC Phone #: 301-225-9232

POC Email: matthew.j.fanning.civ@mail.mil

EVALUATION FACTORS

A. Technical/Management Approach:

(a) Subfactor 1: The contractor must have active registration in the System for Award

Management (SAM). A printout of the active SAM.gov registration is required to be provided with quotation submission.

(b) Subfactor 2: The contractor must quote supply items that meet the salient characteristics stated within the EPLS. Quotes for supply items that do not meet the salient characteristics stated within the EPLS will be determined to be technically unacceptable.

(c) Subfactor 3: The contractor must fill out and submit a copy of FAR clause 52.212-3 Offeror

Representations and Certifications with their quotation. The contractor must also provide the completed Attachments as applicable in response to this RFQ.

Evaluation Table - Technical Ratings

Rating Description Acceptable Quotation meets the minimum requirements of the solicitation.

Unacceptable

Quotation does not meet the minimum requirements of the solicitation.

B. Past Performance: There is no requirement to consider past performance for procurements under FAR Part 8 or Subpart 16.5 and doing so often results in a much longer evaluation process.

Therefore, evaluation of past performance is NOT recommended unless you can demonstrate to the KO that it will provide meaningful discrimination between offerors. This is rarely the case when placing an order against a GSA Schedule or an IDIQ contract. In the event that past performance is considered on this LPTA requirement, it will only be done on the basis of acceptable/unacceptable and will be considered only after the technical proposal/quotation is determined acceptable.

Do you want to consider past performance: Yes_____ No__X___

If yes, describe what meaningful discrimination between offerors you would expect to achieve by evaluating past performance given that this is an LPTA order under an already established

GSA Schedule or IDIQ contract____________________________________________________

Cost/Price Factor

Since this requirement is based on LPTA, award will be made to the contractor that presents the lowest priced technically acceptable approach. The contractor’s price proposal will be evaluated to determine if it is reasonable and complete. Normally, price reasonableness is established through price analysis. The Government will determine completeness of the offeror's proposal by verifying that all solicitation requirements have been priced, figures are correctly calculated, and costs are presented in a clear and useful format. The Government reserves the right to conduct a realism analysis of the proposed price.

In addition, indicate whether or not you want the estimated total dollars available for this requirement to be disclosed to the vendors.

Yes _____. Disclose available funds $ ___________

No __X__. Do not disclose available funds.

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

0001 1 Lot JITC BOLT 25 Cabling and IT Supplies

FFP

JITC BOLT FY25 Cabling and IT supply requirement for commercial open market items. All oferor are to complete the solicitation and attached equipment supply list table.

See attached evaluation factors.

NOTE: The requirements in DFARS 252.211-7003, Item Identification and

Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

FOB: Destination

PSC CD: 7510

NET AMT

INSPECTION AND ACCEPTANCE TERMS

Supplies/services will be inspected/accepted at:

Table 1. Technical/Management Ratings

Rating Description

Acceptable Proposal/quotation clearly meets the minimum requirements of the solicitation.

Unacceptable Proposal/quotation does not clearly meet the minimum requirements of the solicitation.

CLIN INSPECT AT INSPECT BY ACCEPT AT ACCEPT BY

0001 Destination Government N/A Government

DELIVERY INFORMATION

CLIN DELIVERY DATE QUANTITY SHIP TO ADDRESS DODAAC /

CAGE

0001 17-NOV-2025 1 DISA JITC

6906 COOPER AVENUE

FORT MEADE MD 20755

MATTHEW FANNING

301-225-9232

FOB: Destination

HC1046

CLAUSES INCORPORATED BY REFERENCE

52.204-25 Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or Equipment

NOV 2021

52.204-26 Covered Telecommunications Equipment or Services--

Representation.

OCT 2020

52.209-10 Prohibition on Contracting With Inverted Domestic

Corporations

NOV 2015

52.219-33 Nonmanufacturer Rule SEP 2021

52.222-50 Combating Trafficking in Persons NOV 2021

52.229-11 Tax on Certain Foreign Procurements--Notice and

Representation

JUN 2020

52.232-33 Payment by Electronic Funds Transfer--System for Award

Management

OCT 2018

52.232-36 Payment by Third Party MAY 2014

252.203-7000 Requirements Relating to Compensation of Former DoD

Officials

SEP 2011

252.203-7002 Requirement to Inform Employees of Whistleblower Rights DEC 2022

252.204-7003 Control Of Government Personnel Work Product APR 1992

252.204-7012 Safeguarding Covered Defense Information and Cyber

Incident Reporting

MAY 2024

252.204-7018 Prohibition on the Acquisition of Covered Defense

Telecommunications Equipment or Services

JAN 2023

252.204-7020 NIST SP 800-171 DoD Assessment Requirements NOV 2023

252.211-7008 Use of Government-Assigned Serial Numbers SEP 2010

252.225-7008 Restriction on Acquisition of Specialty Metals MAR 2013

252.225-7036 Buy American--Free Trade Agreements--Balance of

Payments Program--Basic

FEB 2024

252.225-7048 Export-Controlled Items JUN 2013

252.225-7055 Representation Regarding Business Operations with the

Maduro Regime

MAY 2022

252.225-7056 Prohibition Regarding Business Operations with the Maduro

Regime

JAN 2023

252.225-7059 Prohibition on Certain Procurements from the Xinjiang

Uyghur Autonomous Region - Representation

JUN 2023

252.225-7060 Prohibition on Certain Procurements from the Xinjiang

Uyghur Autonomous Region

JUN 2023

252.232-7003 Electronic Submission of Payment Requests and Receiving

Reports

DEC 2018

252.232-7010 Levies on Contract Payments DEC 2006

252.239-7018 Supply Chain Risk DEC 2022

252.243-7001 Pricing Of Contract Modifications DEC 1991

252.244-7000 Subcontracts for Commercial Products or Commercial

Services

NOV 2023

252.246-7006 Warranty Tracking of Serialized Items MAR 2016

252.247-7023 Transportation of Supplies by Sea OCT 2024

CLAUSES INCORPORATED BY FULL TEXT

52.204-6 UNIQUE ENTITY IDENTIFIER (OCT 2016)

(a) Definitions. As used in this provision--

Electronic Funds Transfer (EFT) indicator means a four-character suffix to the unique entity identifier. The suffix is assigned at the discretion of the commercial, nonprofit, or Government entity to establish additional System for

Award Management records for identifying alternative EFT accounts (see subpart 32.11) for the same entity.

Unique entity identifier means a number or other identifier used to identify a specific commercial, nonprofit, or

Government entity. See www.sam.gov for the designated entity for establishing unique entity identifiers.

(b) The Offeror shall enter, in the block with its name and address on the cover page of its offer, the annotation

``Unique Entity Identifier'' followed by the unique entity identifier that identifies the Offeror's name and address exactly as stated in the offer. The Offeror also shall enter its EFT indicator, if applicable.

(c) If the Offeror does not have a unique entity identifier, it should contact the entity designated at www.sam.gov for establishment of the unique entity identifier directly to obtain one. The Offeror should be prepared to provide the following information:

(1) Company legal business name.

(2) Tradestyle, doing business, or other name by which your entity is commonly recognized.

(3) Company physical street address, city, state and Zip Code.

(4) Company mailing address, city, state and Zip Code (if separate from physical).

(5) Company telephone number.

(6) Date the company was started.

(7) Number of employees at your location.

(8) Chief executive officer/key manager.

(9) Line of business (industry).

http://www.sam.gov/

(10) Company headquarters name and address (reporting relationship within your entity).

(End of provision)

52.204-7 SYSTEM FOR AWARD MANAGEMENT (NOV 2024)

(a) Definitions. As used in this provision--

Electronic Funds Transfer (EFT) indicator means a four-character suffix to the unique entity identifier. The suffix is assigned at the discretion of the commercial, nonprofit, or Government entity to establish additional System for

Award Management records for identifying alternative EFT accounts (see subpart 32.11) for the same entity.

Registered in the System for Award Management (SAM) means that--

(1) The Offeror has entered all mandatory information, including the unique entity identifier and the EFT indicator, if applicable, the Commercial and Government Entity (CAGE) code, as well as data required by the Federal Funding

Accountability and Transparency Act of 2006 (see subpart 4.14) into SAM;

(2) The offeror has completed the Core, Assertions, and Representations and Certifications, and Points of Contact sections of the registration in SAM;

(3) The Government has validated all mandatory data fields, to include validation of the Taxpayer Identification

Number (TIN) with the Internal Revenue Service (IRS). The offeror will be required to provide consent for TIN validation to the Government as a part of the SAM registration process; and

(4) The Government has marked the record ``Active''.

Unique entity identifier means a number or other identifier used to identify a specific commercial, nonprofit, or

Government entity. See www.sam.gov for the designated entity for establishing unique entity identifiers.

(b)(1) An Offeror is required to be registered in SAM when submitting an offer or quotation and at time of award

(see FAR clause 52.204-13, System for Award Management Maintenance, for the requirement to maintain SAM registration during performance and through final payment).

(2) The Offeror shall enter, in the block with its name and address on the cover page of its offer, the annotation

``Unique Entity Identifier'' followed by the unique entity identifier that identifies the Offeror's name and address exactly as stated in the offer. The Offeror also shall enter its EFT indicator, if applicable. The unique entity identifier will be used by the Contracting Officer to verify that the Offeror is registered in SAM.

(c) If the Offeror does not have a unique entity identifier, it should contact the entity designated at www.sam.gov for establishment of the unique entity identifier directly to obtain one. The Offeror should be prepared to provide the following information:

(1) Company legal business name.

(2) Tradestyle, doing business, or other name by which your entity is commonly recognized.

(3) Company physical street address, city, state, and Zip Code.

(4) Company mailing address, city, state and Zip Code (if separate from physical).

(5) Company telephone number.

(6) Date the company was started.

(7) Number of employees at your location.

(8) Chief executive officer/key manager.

(9) Line of business (industry).

(10) Company headquarters name and address (reporting relationship within your entity).

(d) Processing time should be taken into consideration when registering. Offerors who are not registered in SAM should consider applying for registration immediately upon receipt of this solicitation. See https://www.sam.gov for information on registration.

52.204-24 REPRESENTATION REGARDING CERTAIN TELECOMMUNICATIONS AND VIDEO

SURVEILLANCE SERVICES OR EQUIPMENT (NOV 2021)

The Offeror shall not complete the representation at paragraph (d)(1) of this provision if the Offeror has represented that it "does not provide covered telecommunications equipment or services as a part of its offered products or services to the Government in the performance of any contract, subcontract, or other contractual instrument" in paragraph (c)(1) in the provision at 52.204-26, Covered Telecommunications Equipment or Services--

Representation, or in paragraph (v)(2)(i) of the provision at 52.212-3, Offeror Representations and Certifications-

Commercial Products and Commercial Services. The Offeror shall not complete the representation in paragraph

(d)(2) of this provision if the Offeror has represented that it "does not use covered telecommunications equipment or services, or any equipment, system, or service that uses covered telecommunications equipment or services" in paragraph (c)(2) of the provision at 52.204-26, or in paragraph (v)(2)(ii) of the provision at 52.212-3.

(a) Definitions. As used in this provision-

Backhaul, covered telecommunications equipment or services, critical technology, interconnection arrangements, reasonable inquiry, roaming, and substantial or essential component have the meanings provided in the clause

52.204-25, Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or

Equipment.

(b) Prohibition.

(1) Section 889(a)(1)(A) of the John S. McCain National Defense Authorization Act for Fiscal Year 2019 (Pub. L.

115-232) prohibits the head of an executive agency on or after August 13, 2019, from procuring or obtaining, or extending or renewing a contract to procure or obtain, any equipment, system, or service that uses covered telecommunications equipment or services as a substantial or essential component of any system, or as critical technology as part of any system. Nothing in the prohibition shall be construed to--

(i) Prohibit the head of an executive agency from procuring with an entity to provide a service that connects to the facilities of a third-party, such as backhaul, roaming, or interconnection arrangements; or

(ii) Cover telecommunications equipment that cannot route or redirect user data traffic or cannot permit visibility into any user data or packets that such equipment transmits or otherwise handles.

https://www.sam.gov/

(2) Section 889(a)(1)(B) of the John S. McCain National Defense Authorization Act for Fiscal Year 2019 (Pub. L.

115-232) prohibits the head of an executive agency on or after August 13, 2020, from entering into a contract or extending or renewing a contract with an entity that uses any equipment, system, or service that uses covered telecommunications equipment or services as a substantial or essential component of any system, or as critical technology as part of any system. This prohibition applies to the use of covered telecommunications equipment or services, regardless of whether that use is in performance of work under a Federal contract. Nothing in the prohibition shall be construed to--

(i) Prohibit the head of an executive agency from procuring with an entity to provide a service that connects to the facilities of a third-party, such as backhaul, roaming, or interconnection arrangements; or

(ii) Cover telecommunications equipment that cannot route or redirect user data traffic or cannot permit visibility into any user data or packets that such equipment transmits or otherwise handles.

(c) Procedures. The Offeror shall review the list of excluded parties in the System for Award Management (SAM)

(https://www.sam.gov) for entities excluded from receiving federal awards for "covered telecommunications equipment or services."

(d) Representations. The Offeror represents that--

(1) It [ ___ ] will, [ ___ ] will not provide covered telecommunications equipment or services to the Government in the performance of any contract, subcontract or other contractual instrument resulting from this solicitation. The

Offeror shall provide the additional disclosure information required at paragraph (e)(1) of this section if the Offeror responds "will" in paragraph (d)(1) of this section; and

(2) After conducting a reasonable inquiry, for purposes of this representation, the Offeror represents that--

It [ ___ ] does, [ ___ ] does not use covered telecommunications equipment or services, or use any equipment, system, or service that uses covered telecommunications equipment or services. The Offeror shall provide the additional disclosure information required at paragraph (e)(2) of this section if the Offeror responds "does" in paragraph (d)(2) of this section.

(e) Disclosures.

(1) Disclosure for the representation in paragraph (d)(1) of this provision. If the Offeror has responded "will" in the representation in paragraph (d)(1) of this provision, the Offeror shall provide the following information as part of the offer:

(i) For covered equipment--

(A) The entity that produced the covered telecommunications equipment (include entity name, unique entity identifier, CAGE code, and whether the entity was the original equipment manufacturer (OEM) or a distributor, if known);

(B) A description of all covered telecommunications equipment offered (include brand; model number, such as

OEM number, manufacturer part number, or wholesaler number; and item description, as applicable); and

(C) Explanation of the proposed use of covered telecommunications equipment and any factors relevant to determining if such use would be permissible under the prohibition in paragraph (b)(1) of this provision.

(ii) For covered services--

(A) If the service is related to item maintenance: A description of all covered telecommunications services offered

(include on the item being maintained: Brand; model number, such as OEM number, manufacturer part number, or wholesaler number; and item description, as applicable); or

(B) If not associated with maintenance, the Product Service Code (PSC) of the service being provided; and explanation of the proposed use of covered telecommunications services and any factors relevant to determining if such use would be permissible under the prohibition in paragraph (b)(1) of this provision.

(2) Disclosure for the representation in paragraph (d)(2) of this provision. If the Offeror has responded "does" in the representation in paragraph (d)(2) of this provision, the Offeror shall provide the following information as part of the offer:

(i) For covered equipment--

(A) The entity that produced the covered telecommunications equipment (include entity name, unique entity identifier, CAGE code, and whether the entity was the OEM or a distributor, if known);

(B) A description of all covered telecommunications equipment offered (include brand; model number, such as

OEM number, manufacturer part number, or wholesaler number; and item description, as applicable); and

(C) Explanation of the proposed use of covered telecommunications equipment and any factors relevant to determining if such use would be permissible under the prohibition in paragraph (b)(2) of this provision.

(ii) For covered services--

(A) If the service is related to item maintenance: A description of all covered telecommunications services offered

(include on the item being maintained: Brand; model number, such as OEM number, manufacturer part number, or wholesaler number; and item description, as applicable); or

(B) If not associated with maintenance, the PSC of the service being provided; and explanation of the proposed use of covered telecommunications services and any factors relevant to determining if such use would be permissible under the prohibition in paragraph (b)(2) of this provision.

52.204-27 PROHIBITION ON A BYTEDANCE COVERED APPLICATION (JUN 2023)

(a) Definitions. As used in this clause--

Covered application means the social networking service TikTok or any successor application or service developed or provided by ByteDance Limited or an entity owned by ByteDance Limited.

Information technology, as defined in 40 U.S.C. 11101(6)--

(1) Means any equipment or interconnected system or subsystem of equipment, used in the automatic acquisition, storage, analysis, evaluation, manipulation, management, movement, control, display, switching, interchange, transmission, or reception of data or information by the executive agency, if the equipment is used by the executive agency directly or is used by a contractor under a contract with the executive agency that requires the use-

(i) Of that equipment; or

(ii) Of that equipment to a significant extent in the performance of a service or the furnishing of a product;

(2) Includes computers, ancillary equipment (including imaging peripherals, input, output, and storage devices necessary for security and surveillance), peripheral equipment designed to be controlled by the central processing unit of a computer, software, firmware and similar procedures, services (including support services), and related resources; but

(3) Does not include any equipment acquired by a Federal contractor incidental to a Federal contract.

(b) Prohibition. Section 102 of Division R of the Consolidated Appropriations Act, 2023 (Pub. L. 117-328), the No

TikTok on Government Devices Act, and its implementing guidance under Office of Management and Budget

(OMB) Memorandum M-23-13, dated February 27, 2023, "No TikTok on Government Devices" Implementation

Guidance, collectively prohibit the presence or use of a covered application on executive agency information technology, including certain equipment used by Federal contractors. The Contractor is prohibited from having or using a covered application on any information technology owned or managed by the Government, or on any information technology used or provided by the Contractor under this contract, including equipment provided by the

Contractor's employees; however, this prohibition does not apply if the Contracting Officer provides written notification to the Contractor that an exception has been granted in accordance with OMB Memorandum M-23-13.

(c) Subcontracts. The Contractor shall insert the substance of this clause, including this paragraph (c), in all subcontracts, including subcontracts for the acquisition of commercial products or commercial services.

(End of clause)

52.212-3 OFFEROR REPRESENTATIONS AND CERTIFICATIONS--COMMERCIAL PRODUCTS AND

COMMERCIAL SERVICES (MAR 2025) (DEVIATION 2025-O0003))

The Offeror shall complete only paragraph (b) of this provision if the Offeror has completed the annual representations and certification electronically in the System for Award Management (SAM) accessed through https://www.sam.gov. If the Offeror has not completed the annual representations and certifications electronically, the Offeror shall complete only paragraphs (c) through (v) of this provision.

(a) Definitions. As used in this provision --

"Covered telecommunications equipment or services" has the meaning provided in the clause 52.204-25, Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or Equipment.

"Economically disadvantaged women-owned small business (EDWOSB) concern" means a small business concern that is at least 51 percent directly and unconditionally owned by, and the management and daily business operations of which are controlled by, one or more women who are citizens of the United States and who are economically disadvantaged in accordance with 13 CFR part 127, and the concern is certified by SBA or an approved third-party certifier in accordance with 13 CFR 127.300. It automatically qualifies as a women-owned small business eligible under the WOSB Program.

"Forced or indentured child labor" means all work or service-

(1) Exacted from any person under the age of 18 under the menace of any penalty for its nonperformance and for which the worker does not offer himself voluntarily; or

(2) Performed by any person under the age of 18 pursuant to a contract the enforcement of which can be accomplished by process or penalties.

"Highest-level owner" means the entity that owns or controls an immediate owner of the offeror, or that owns or controls one or more entities that control an immediate owner of the offeror. No entity owns or exercises control of the highest level owner.

"Immediate owner" means an entity, other than the offeror, that has direct control of the offeror. Indicators of control include, but are not limited to, one or more of the following: Ownership or interlocking management, identity of interests among family members, shared facilities and equipment, and the common use of employees.

"Inverted domestic corporation" means a foreign incorporated entity that meets the definition of an inverted domestic corporation under 6 U.S.C. 395(b), applied in accordance with the rules and definitions of 6 U.S.C. 395(c).

"Manufactured end product" means any end product in product and service codes (PSCs) 1000-9999, except--

(1) PSC 5510, Lumber and Related Basic Wood Materials;

(2) Product or Service Group (PSG) 87, Agricultural Supplies;

(3) PSG 88, Live Animals;

(4) PSG 89, Subsistence;

(5) PSC 9410, Crude Grades of Plant Materials;

(6) PSC 9430, Miscellaneous Crude Animal Products, Inedible;

(7) PSC 9440, Miscellaneous Crude Agricultural and Forestry Products;

(8) PSC 9610, Ores;

(9) PSC 9620, Minerals, Natural and Synthetic; and

(10) PSC 9630, Additive Metal Materials.

"Place of manufacture" means the place where an end product is assembled out of components, or otherwise made or processed from raw materials into the finished product that is to be provided to the Government. If a product is disassembled and reassembled, the place of reassembly is not the place of manufacture.

"Predecessor" means an entity that is replaced by a successor and includes any predecessors of the predecessor.

"Reasonable inquiry" has the meaning provided in the clause 52.204-25, Prohibition on Contracting for Certain

Telecommunications and Video Surveillance Services or Equipment.

"Restricted business operations" means business operations in Sudan that include power production activities, mineral extraction activities, oil-related activities, or the production of military equipment, as those terms are defined in the Sudan Accountability and Divestment Act of 2007 (Pub. L. 110-174). Restricted business operations do not include business operations that the person (as that term is defined in Section 2 of the Sudan Accountability and Divestment Act of 2007) conducting the business can demonstrate--

(1) Are conducted under contract directly and exclusively with the regional government of southern Sudan;

(2) Are conducted pursuant to specific authorization from the Office of Foreign Assets Control in the Department of the Treasury, or are expressly exempted under Federal law from the requirement to be conducted under such authorization;

(3) Consist of providing goods or services to marginalized populations of Sudan;

(4) Consist of providing goods or services to an internationally recognized peacekeeping force or humanitarian organization;

(5) Consist of providing goods or services that are used only to promote health or education; or

(6) Have been voluntarily suspended.

"Sensitive technology"--

(1) Means hardware, software, telecommunications equipment, or any other technology that is to be used specifically--

(i) To restrict the free flow of unbiased information in Iran; or

(ii) To disrupt, monitor, or otherwise restrict speech of the people of Iran; and

(2) Does not include information or informational materials the export of which the President does not have the authority to regulate or prohibit pursuant to section 203(b)(3) of the International Emergency Economic Powers Act

(50 U.S.C. 1702(b)(3)).

"Service-disabled veteran-owned small business (SDVOSB) concern" means a small business concern—

(1)(i) Not less than 51 percent of which is owned and controlled by one or more service-disabled veterans or, in the case of any publicly owned business, not less than 51 percent of the stock of which is owned by one or more service-disabled veterans; and

(ii) The management and daily business operations of which are controlled by one or more service-disabled veterans or, in the case of a service-disabled veteran with permanent and severe disability, the spouse or permanent caregiver of such veteran; or

(2) A small business concern eligible under the SDVOSB Program in accordance with 13 CFR part 128 (see subpart

19.14).

(3) Service-disabled veteran, as used in this definition, means a veteran as defined in 38 U.S.C. 101(2), with a disability that is service-connected, as defined in 38 U.S.C. 101(16), and who is registered in the Beneficiary

Identification and Records Locator Subsystem, or successor system that is maintained by the Department of

Veterans Affairs' Veterans Benefits Administration, as a service-disabled veteran.

"Service-disabled veteran-owned small business (SDVOSB) concern eligible under the SDVOSB Program" means an SDVOSB concern that--

(1) Effective January 1, 2024, is designated in the System for Award Management (SAM) as certified by the Small

Business Administration (SBA) in accordance with 13 CFR 128.300; or

(2) Has represented that it is an SDVOSB concern in SAM and submitted a complete application for certification to

SBA on or before December 31, 2023.

"Service-disabled veteran-owned small business (SDVOSB) Program" means a program that authorizes contracting officers to limit competition, including award on a sole-source basis, to SDVOSB concerns eligible under the

SDVOSB Program.

"Small business concern"--

(1) Means a concern, including its affiliates, that is independently owned and operated, not dominant in its field of operation, and qualified as a small business under the criteria in 13 CFR part 121 and size standards in this solicitation.

(2) Affiliates, as used in this definition, means business concerns, one of whom directly or indirectly controls or has the power to control the others, or a third party or parties control or have the power to control the others. In determining whether affiliation exists, consideration is given to all appropriate factors including common ownership, common management, and contractual relationships. SBA determines affiliation based on the factors set forth at 13 CFR 121.103.

"Small disadvantaged business concern, consistent with 13 CFR 124.1001", means a small business concern under the size standard applicable to the acquisition, that--

(1) Is at least 51 percent unconditionally and directly owned (as defined at 13 CFR 124.105) by--

(i) One or more socially disadvantaged (as defined at 13 CFR 124.103) and economically disadvantaged (as defined at 13 CFR 124.104) individuals who are citizens of the United States; and

(ii) Each individual claiming economic disadvantage has a net worth not exceeding the threshold at 13 CFR

124.104(c)(2) after taking into account the applicable exclusions set forth at 13 CFR 124.104(c)(2); and

(2) The management and daily business operations of which are controlled (as defined at 13 CFR 124.106) by individuals, who meet the criteria in paragraphs (1)(i) and (ii) of this definition.

"Subsidiary" means an entity in which more than 50 percent of the entity is owned--

(1) Directly by a parent corporation; or

(2) Through another subsidiary of a parent corporation.

"Successor" means an entity that has replaced a predecessor by acquiring the assets and carrying out the affairs of the predecessor under a new name (often through acquisition or merger). The term "successor" does not include new offices/divisions of the same company or a company that only changes its name. The extent of the responsibility of the successor for the liabilities of the predecessor may vary, depending on State law and specific circumstances.

"Veteran-owned small business concern" means a small business concern--

(1) Not less than 51 percent of which is owned and controlled by one or more veterans (as defined at 38 U.S.C.

101(2)) or, in the case of any publicly owned business, not less than 51 percent of the stock of which is owned by one or more veterans; and

(2) The management and daily business operations of which are controlled by one or more veterans.

"Women-owned business concern" means a concern which is at least 51 percent owned by one or more women; or in the case of any publicly owned business, at least 51 percent of its stock is owned by one or more women; and whose management and daily business operations are controlled by one or more women.

"Women-owned small business concern" means a small business concern--

(1) That is at least 51 percent owned by one or more women; or, in the case of any publicly owned business, at least

51 percent of the stock of which is owned by one or more women; and

(2) Whose management and daily business operations are controlled by one or more women.

"Women-owned small business (WOSB) concern eligible under the WOSB Program" (in accordance with 13 CFR part 127), means a small business concern that is at least 51 percent directly and unconditionally owned by, and the management and daily business operations of which are controlled by, one or more women who are citizens of the

United States, and the concern is certified by SBA or an approved third-party certifier in accordance with 13 CFR

127.300.

(b) (1) Annual Representations and Certifications. Any changes provided by the Offeror in paragraph (b)(2) of this provision do not automatically change the representations and certifications in SAM.

(2) The offeror has completed the annual representations and certifications electronically in SAM accessed through http://www.sam.gov. After reviewing SAM information, the Offeror verifies by submission of this offer that the representations and certifications currently posted electronically at FAR 52.212-3, Offeror

Representations and Certifications--Commercial Products and Commercial Services, have been entered or updated in the last 12 months, are current, accurate, complete, and applicable to this solicitation (including the business size standard(s) applicable to the NAICS code(s) referenced for this solicitation), at the time this offer is submitted and are incorporated in this offer by reference (see FAR 4.1201), except for paragraphs ___

[Offeror to identify the applicable paragraphs at (c) through (v) of this provision that the offeror has completed for the purposes of this solicitation only, if any. These amended representation(s) and/or certification(s) are also incorporated in this offer and are current, accurate, and complete as of the date of this offer. Any changes provided by the offeror are applicable to this solicitation only, and do not result in an update to the representations and certifications posted electronically on SAM.]

(c) Offerors must complete the following representations when the resulting contract is for supplies to be delivered or services to be performed in the United States or its outlying areas, or when the contracting officer has applied part

19 in accordance with 19.000(b)(1)(ii). Check all that apply.

(1) Small business concern. The offeror represents as part of its offer that--

(i) It [ ___ ] is, [ ___ ] is not a small business concern; or

(ii) It [ ___ ] is, [ ___ ] is not a small business joint venture that complies with the requirements of 13 CFR

121.103(h) and 13 CFR 125.8(a) and (b). [The offeror shall enter the name and unique entity identifier of each party to the joint venture: ___ ]

(2) Veteran-owned small business concern. (Complete only if the offeror represented itself as a small business concern in paragraph (c)(1) of this provision.) The offeror represents as part of its offer that it

[ ___ ] is, [ ___ ] is not a veteran-owned small business concern.

(3) SDVOSB concern. [Complete only if the offeror represented itself as a veteran-owned small business concern in paragraph (c)(2) of this provision.] The offeror represents that it [ ___ ] is, [ ___ ] is not an SDVOSB concern.

(4) SDVOSB concern joint venture eligible under the SDVOSB Program. The offeror represents that it

[ ___ ] is, [ ___ ] is not an SDVOSB joint venture eligible under the SDVOSB Program that complies with the requirements of 13 CFR 128.402. [Complete only if the offeror represented itself as an SDVOSB concern in paragraph (c)(3) of this provision.] [The offeror shall enter the name and unique entity identifier of each party to the joint venture: ___ .]

(5) Small disadvantaged business concern. (Complete only if the offeror represented itself as a small business concern in paragraph (c)(1) of this provision.) The offeror represents that it [ ___ ] is, [ ___ ] is not a small disadvantaged business concern as defined in 13 CFR 124.1001.

(6) Women-owned small business concern. (Complete only if the offeror represented itself as a small business concern in paragraph (c)(1) of this provision.) The offeror represents that it [ ___ ] is, [ ___ ] is not a women-owned small business concern.

(7) WOSB joint venture eligible under the WOSB Program. The offeror represents that it [ ___ ] is, [ ___ ] is not a joint venture that complies with the requirements of 13 CFR 127.506(a) through (c). [The offeror shall enter the name and unique entity identifier of each party to the joint venture: ___ .

(8) Economically disadvantaged women-owned small business (EDWOSB) joint venture. The offeror represents that it [ ___ ] is, [ ___ ] is not a joint venture that complies with the requirements of 13 CFR 127.506(a) through (c).

[The offeror shall enter the name and unique entity identifier of each party to the joint venture: ___ .]

Note to paragraphs (c)(9) and (10): Complete paragraphs (c)(9) and (10) only if this solicitation is expected to exceed the simplified acquisition threshold.

(9) Women-owned business concern (other than small business concern). (Complete only if the offeror is a women-owned business concern and did not represent itself as a small business concern in paragraph (c)(1) of this provision.) The offeror represents that it ( ___ ) is, a women-owned business concern.

(10) Tie bid priority for labor surplus area concerns. If this is an invitation for bid, small business offerors may identify the labor surplus areas in which costs to be incurred on account of manufacturing or production (by offeror or first-tier subcontractors) amount to more than 50 percent of the contract price:

(11) HUBZone small business concern. [Complete only if the offeror represented itself as a small business concern in paragraph (c)(1) of this provision.] The offeror represents, as part of its offer, that--

(i) It [ ___ ] is, [ ___ ] is not a HUBZone small business concern listed, on the date of this representation, as having been certified by SBA as a HUBZone small business concern in the Dynamic Small Business Search and SAM, and will attempt to maintain an employment rate of HUBZone residents of 35 percent of its employees during performance of a HUBZone contract (see 13 CFR 126.200(e)(1)); and

(ii) It [ ___ ] is, [ ___ ] is not a HUBZone joint venture that complies with the requirements of 13 CFR 126.616(a) through (c). [The offeror shall enter the name and unique entity identifier of each party to the joint venture: ___ .]

Each HUBZone small business concern participating in the HUBZone joint venture shall provide representation of its HUBZone status.

(d) [Reserved]

(e) Certification Regarding Payments to Influence Federal Transactions (31 U.S.C. 1352). (Applies only if the contract is expected to exceed $150,000.) By submission of its offer, the offeror certifies to the best of its knowledge and belief that no Federal appropriated funds have been paid or will be paid to any person for influencing or attempting to influence an officer or employee of any agency, a Member of Congress, an officer or employee of

Congress or an employee of a Member of Congress on his or her behalf in connection with the award of any resultant contract. If any registrants under the Lobbying Disclosure Act of 1995 have made a lobbying contact on behalf of the offeror with respect to this contract, the offeror shall complete…

This is the start of the file's text. The full file is on GovTribe.

File details come from the government source that posted it. Updated .