SATPC0032863 Tab 04 4 SOW Revised.pdf
PDF 174 KB Posted
- Solicitation number
- 80NSSC845894Q
About this file
This document is a statement of work for an air compressor system solicitation by the National Aeronautics and Space Administration Shared Services Center. The statement of work specifies requirements for an oil-free rotary tooth air compressor producing a minimum of 294 cubic feet per minute at 125 pounds per square inch gauge pressure. Additional required equipment includes a heatless desiccant air dryer with a minimum flow capacity of 320 cubic feet per minute at 100 pounds per square inch gauge, a compressed air filter rated at 0.01 micron and 0.01 parts per million, and two vertical air receiver tanks with capacities of 400 and 1060 gallons and maximum pressures of 165 pounds per square inch gauge. The specified equipment must meet stated purity requirements and have a minimum two-year warranty. Delivery within 16 weeks of award is required to the specified NASA facility.
View the file
Other files
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
STATEMENT OF WORK – Air Compressor System Revision 1 – see highlighted text under Dryer section
1. Objective Procure an Air Compressor System to the minimum specifications stated below.
Suggested Manufacturer is Quincy Suggested Model/components:
- QOFT-75V Rotary Air Compressor
- With internal Frequency Drive having IP5X protection
- With Q-Control Touch Module o This system will NOT be connected to the internet at SSC
- QHD-320 Compressed Air Dryer
- QCF 321 Compressed Air Filter
- T400V-165 Air Receiver Tank
- T1060V-155 Air Receiver Tank
- PPFC-1 Flow Controller
2. Characteristics, Scope, and Specs
Air Compressor System shall produce air to meet these SSC requirements:
SSC HIGH PURITY AIR (HPA)
O2: 18-23½ % H2O (max ppm): 24 (-53.9°C Dew Point) Volatile Hydrocarbons**(max ppm): 15 Particulate (gas): 30μ-100μ: 25; >100μ: 0 Condensable Hydrocarbons: 0.25 mgs (max.)
** Total volatile (gaseous) hydrocarbons expressed as methane (CH4).
Specifications (minimum):
Rotary Tooth Air Compressor 100% Oil-Free air compression; ISO 8573-1 certified Class 0 compressor 75 HP, Voltage: 460/3/60, internal Frequency Drive having IP5X protection Available Flow (Capacity): 294.0 ACFM @ 125 PSIG Compressed Air Outlet Size: 1-½” FNPT Condensate Drain Outlet Size: 1/8” FNPT Water Separator to separate the condensate from the compressed air prior to the dryer Sound Level to be 80 dBA or less Forklift holes for lifting The control module is to regulate all required compressor protection functions and monitors components subject to service using service timers.
Compressed Air Dryer Adsorption dryer - heatless reactivated desiccant dryer Dryer completely wired and equipped with all interconnecting pipe work All equipment mounted on a single common frame, completely wired and ready to operate Inlet and Outlet filters 8092251597 - KIT QHD 230-635 Pressure Dew Point (PDP)
8092251605 - KIT QHD-QBP 210-635 REMOTE PDP OUTPUT
8092261745 - Sonic Nozzle (purge nozzle kit for inlet pressure adjustments) ASME approved vessels NEMA 4 control panel Available Flow (Capacity): 320 CFM @ 100 PSIG In/Out Connection: 1-½” NPT Maximum Pressure: 160 PSIG or greater
Compressed Air Filter Shall removal of fine solid particles, water, and oil aerosol ISO 8573 compliant Available Flow (Capacity): 320 CFM @ 100 PSIG In/Out Connection: 1-½” NPT Drain Type: Float-Style Automatic Filter Rating: 0.01 micron, 0.01 PPM, 8000 hour element Flow pressure loss: 1.2 psi or less Differential Pressure Gauge
Air Receiver Tank ASME Code Stamped Capacity: 400 gal Maximum Pressure: 165 PSIG Arrangement: Vertical Pressure Relief Valve and Gauge Kit
Air Receiver Tank ASME Code Stamped Capacity: 1060 gal Maximum Pressure: 165 PSIG Arrangement: Vertical Pressure Relief Valve and Gauge Kit
Flow Controller Connections: Inlet: 2” NPT Outlet: 2” NPT Maximum Pressure: 200 PSIG Maximum Flow: 500 CFM @ 100 PSIG Control Type: Pneumatic 0-125 psig Set Point Range
Minimum of 24 months warranty
3. Ship to:
NASA-Stennis Space Center Building 9166
SSC, MS 39529
4. Required Delivery: 16 weeks from award or sooner
File details come from the government source that posted it. Updated .