SATPC0043119 Tab 06 RDSS..pdf
PDF 147 KB Posted
- Solicitation number
- 80NSSC27948132Q
About this file
This is a NASA Sole Source Justification and Determination form recommending procurement from a single vendor without competitive solicitation.
NASA's Shared Services Center seeks to procure carbon fiber prepreg tape exclusively from Patz Materials and Technologies, LLC for the Habitable Worlds Observatory (HWO) project. The estimated period of performance is 8 weeks after award. The total estimated cost is redacted in the document. Patz has developed a proprietary lightweight carbon fiber prepreg tape embedded with F6 cyanate ester resin that achieves zero coefficient of thermal expansion (CTE), required to manufacture the ultra-stable structural backbone beams for HWO mirrors that must resist warping under extreme temperature variations in deep space. Market research confirmed that competing vendors such as Hexcel and Toray impose minimum purchase quantities (hundreds to thousands of pounds) far exceeding the project requirement of 60 pounds, rendering alternative sources cost-prohibitive. Patz is the sole vendor offering the proprietary F6 cyanate ester resin necessary to achieve the zero-CTE capability, and the specific fibers requested possess spaceflight heritage data validating performance. Selection of an alternative vendor would necessitate eventual subcontracting to Patz for the resin component, increasing costs, or accepting incompatible materials and excessive minimum quantities that would exceed project budget constraints. Failure to procure this material would prevent assembly of high-accuracy, thermally-resilient large-diameter telescopes, negatively impacting NASA's science mission objectives. The justification is submitted by the STMD (Space Technology Mission Directorate) Project office.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| SATPC0043119 Tab 07 Capability Statement.pdf | ||
| SATPC0043119 Tab 04 4 SOW.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Page 1 V2.0 3-15-2017
NATIONAL AERONAUTICS AND SPACE ADMINISTRATION
NASA SHARED SERVICES CENTER
RECOMMENDATION AND DETERMINATION TO SOLICIT FROM ONE SOURCE
OR BRAND NAME
PICK ONE
Sole Source:
☒I recommend that NASA, NASA Shared Services Center negotiate with Patz Materials and Technologies, LLC only for Carbon Fiber Prepreg Tape. The total estimated cost of this effort is and the estimated period of performance or lead-time for delivery is 8 weeks after award.
OR
Brand Name Justification:
☐I recommend that NASA, NASA Shared Services Center negotiate with only with vendors who can provide the subject band name from Manufacture Name for Enter Supply or Service to be procured. The total estimated cost of this effort is Enter Dollar amount and the estimated period of performance or lead-time for delivery is Date.
This recommendation is for the acquisition of supplies or services determined to be reasonably available from only one source/only one manufacture. Competition is impractical for the following reasons (please answer the questions below):
1. What are the reasons for soliciting only the suggested source/suggested brand name? Please provide the unique characteristics of the items or services along with the supporting rationale and the market research performed to substantiate your reason for the suggested source/brand name.
Patz Materials and Technologies, LLC has developed a unique lightweight carbon fiber prepreg tape embedded with F6 cyanate ester resin that achieves a coefficient of thermal expansion (CTE) of zero.
This zero-CTE tape can be used to manufacture structural beams for the backbone of the Habitable Worlds Observatory (HWO). The HWO mirrors will require an ultra-stable platform to attach to that is resilient to warping under extreme temperature differences, necessitating the zero-CTE structural beams for the backbone. The team researched other manufacturing vendors for the requested materials, (including companies like Hexcel and Toray that manufacture the prepreg and carbon fiber source materials) and found that their minimum purchase quantities (i.e., hundreds or even thousands of lbs.) far exceeded what the team required (i.e., 60 lbs.) to conduct the planned research. Additionally, Patz is the only vendor that offers the proprietary F6 cyanate ester resin that achieves the zero CTE needed for this work. If any other vendor was selected to provide the boron prepreg tape, they would ultimately be required to work with Patz by default to secure the F6 cyanate ester resin, driving up the cost of the materials delivered. The particular fibers requested from Patz in the SOW also have spaceflight heritage data proving the zero-CTE capability.
2. What is the impact to the government if another vendor/brand was used? Include any dollar, schedule, or compatibility impacts if possible.
If we had to work with another vendor, we would lose compatibility with the boron prepreg tape we already have, or we’d have to work with another vendor that offers too high of a minimum quantity (500+ lbs instead of 30 lbs.) that would make this work cost-prohibitive for the project budget and thus the indicated project deliverables would not be able to be completed. No other company has developed the type of carbon fiber prepreg tape embedded with a resin that this team deems a viable solution for manufacturing the zero-CTE structural beams required for the backbone support structure of HWO.
Failure to procure this material developed by Patz Materials and Technologies, LLC will inhibit our
Page 2 V2.0 3-15-2017 ability to assemble high-accuracy, large diameter telescopes resilient to the extreme thermal effects of deep space, thus negatively impacting NASA’s science mission objectives.
ADDITIONAL COMMENTS:
Technical User Name Date
Title
Project, STMD
File details come from the government source that posted it. Updated .