SATPC0043119 Tab 04 4 SOW.pdf
PDF 161 KB Posted
- Solicitation number
- 80NSSC27948132Q
About this file
This is a Statement of Work for the NASA Next-gen Ultra-stable Structures (NGUS) project, specifying carbon fiber prepreg materials for structural composite construction. The vendor must supply two distinct carbon prepreg products: M55J Carbon Prepreg (30 lbs with 73 ± 2 gsm fiber area weight and 35 ± 2 wt.% resin content) and K13C2U Carbon Prepreg (30 lbs with 80 ± 2 gsm fiber area weight and 31 ± 2 wt.% resin content). Both materials must use PMT-F6 Cyanate Ester resin in unidirectional format with tape width of 12 inches or greater, with a cured ply thickness of approximately 0.0025 inches for reference.
Shipment requirements include dry ice packaging with an included temperature recorder and delivery of all relevant documentation covering processing requirements, material properties, and safety data sheets to NASA Langley Research Center in Hampton, Virginia. Materials must arrive no later than December 4, 2026. No specific fiber and resin certifications to particular standards are required. All materials shall be shipped to and stored at NASA Langley Research Center.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| SATPC0043119 Tab 07 Capability Statement.pdf | ||
| SATPC0043119 Tab 06 RDSS..pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
STATEMENT OF WORK
1. Objective/Requirements
The NASA Next-gen Ultra-stable Structures (NGUS) project is seeking carbon fiber prepreg tapes with specific characteristics to construct structural composites.
2. Characteristics, Scope, and Specs
The vendor shall provide the following materials:
• M55J Carbon Prepreg o Fiber Type: M55J o Fiber area weight (FAW): 73 gsm ± 2 gsm o Resin content (RC): 35 wt.% ± 2 wt.% o Mass Quantity: 30 lbs
• K13C2U Carbon Prepreg o Fiber Type: K13C2U o Fiber area weight (FAW): 80 gsm ± 2 gsm o Resin content (RC): 31 wt.% ± 2 wt.% o Mass Quantity: 30 lbs
General Specifications for Both Materials:
• Resin Type: PMT-F6 Cyanate Ester
• Format: Unidirectional
• Width: 12-inch-wide tape or greater
• Cured ply thickness: Roughly 0.0025 inches (For reference only, not a requirement)
• The prepreg shall be shipped with dry ice
• The prepreg shipment shall include a temperature recorder
• Manufacturer shall deliver all relevant documentation to NASA Langley Research
Center that includes information such as processing requirements, material properties, safety (safety data sheet)
There is no need to specify fiber and resin certifications to a specific standard.
3. Place of Performance
All materials shall be shipped to and stored at NASA Langley Research Center in
Hampton, VA.
4. Period of Performance
Materials are needed at NASA Langley Research Center no later than December 4, 2026.
File details come from the government source that posted it. Updated .