SATPC0042587 TAB 04 SOW.pdf

Procurement of CCF (Converter Compressor Facility) Spare Parts – Flexim

1.0 Background

Spare parts are required to be purchased to have on hand in the event of component failure, to minimize outages and provide continued support to the high-pressure nitrogen and helium pipelines. This purchase is for spare parts to support this effort. Specifically, multiple permanent ultrasonic flowmeters are required in addition to a portable ultrasonic flowmeter to measure high-pressure inert gases. The procurement also includes several items that are considered included subparts from the vendor and are identified below.

2.0 Requirements

The following are spare items that need to be purchased to support propellant and life support operations at Kennedy Space Center for vehicle and launch processing. Items must be purchased new. Line items with a dot (.) correspond to the above listed line item and are included with the preceding line item.

Item No. Part Number Description Quantity

DE6-G601GP-NNNNN-2PG3-

NN.CS2

Transmitter, FLUXUS G601 Preferred version: G601 Basic

1.1

• 60076G-44

• 600712-0

• 600137-1

• 610622-1

• 670622-3

• 990744-23

• 992020-1

• 610622-3

-Operating instruction -Carrying case -Transmitter-Fixation -Power supply units -Power cable -Data transmission kit -Measuring tape -Output adapter

1 (each) These are included in line item #1

2 TRD-GSP-NNNN-NNNL-004

Clamp-On Transducer

GDP1NZ7

Transducer calibration with aperture calibration 6 measuring points, including calibration certificate Shear wave, P-type (2 MHz)

2.1

• 990739-6

• 990739-1

-Coupling foils -Coupling compound

1 (each) These are included in line item #2

3 TRD-GSM-NNNN-NNNL-004

Clamp-On Transducer, GDP1NZ7 Transducer calibration with aperture calibration 6 measuring points, including calibration certificate Shear wave, M-type (1 MHz)

3.1

• 990739-6

• 990739-1

-Coupling foils -Coupling compound

1 (each) These are included in line item #3

4 US-601.CM.MB Ladder chain brackets for GLM/GLP 1

5 US-601.CM.MQl

Portable Chain Mounting Kit for M & Q transducers, Suitable for Pipe sizes of up to 24" in outer diameter two tensioners included

6 600522-0

Wall thickness probe for F/6601, -4 ... +392 °F, short-term max. +932 °F, integrated transducer detection and automatic activation of the measurement

7 US-DMPKIT.1

Pipe damping material for gas measurement, self-adhesive for permanent installation

DE7-G731GP-F2NNN-2ST4-

MR.CS2.MN4.TT2.IS2/FVA

Transmitter, G731 G731 [G) FLUXUS for the measurement of: gases [731) Type: 731 [GP] General purpose [F2] explosion protection:

FM Class I, II, Ill Div. 2 [NI Non-intrinsically safe [NN] No additional certificate [2) Measuring channels : 2 [STI Housing: stainless steel [4] Power supply: 11...32 V DC [MR) Modbus RTU Outputs [CS2) 2 x current output, switchable, active/passive, 0/4 ... 20 mA [MN4) 4 x digital output (open collector) 8.2 V NAMUR (DIN EN 60947-5-6), status, pulse, frequency 0.002 ... 10 kHz Inputs [TT2) 2 x temperature input Ptl00/1000 [IS2) 2 x active/passive current input [FVA) Advanced Meter Verification !Full functionality only with FluxDiagfull version

8.1

• 731761-00

• 721110-4

• 801037-9

• 990760-10

-Operating instruction -Transmitter-Fixation (option) -Data transmission kit -Supplements

2 (each) These are included in line item #8

9 TRD-GSP-NF2 N-NNTl-004

Clamp-on transducer, Transducer cal ibration with aperture calibration 6 measuring points, including calibration certificate (factory calibration, no accredited report) [GI For the measurement of: gases [SI Typ: Shear wave [Pl Transducer frequency P-2 MHz Inner pipe diameter (recommended): 0.79 ... 2.0 in inner pipe diameter (extended): 0.59 ... 2.4 in

[N] Normal temperature [F2] explosion protection: FM Class I, II, Ill Div. 2 [NN] No additional certificate [Tl] Connection system: stripped cable ends [004] Cable length: 13 ft

9.1

• 990739-6

• 990739-22

-Coupling foils -Coupling Compound

2 (each) These are included in line item #9

10 MOU-VLP-DS-SSSKl

Mounting:

[VL] Variofix L For transducer frequency P - 2 MHz [DI Measurement arrangement: diagonal or reflection [SI Inner rail length: 9.20 in [SI Fixation: tension straps [SSKl] 0.5'' - 2.5"

11 US-MOU.SKl Fastener for Ptl00/1000:

Strap kit for pipe sizes 0.5"-2.5"

12 770413-1

Temperature probe (clamp-on):

Clamp-On temperature sensor consisting of: 1 ea . 1000-ohm clamp-on platinum RTD, 4-wire, DIN IEC 751 class A, measuring range-22 to 392 °F, 30 ft cable, prepared for junction box and direct connection

13 US-DMPKIT.l Pipe damping material for gas measurement, self-adhesive for permanent installation

Ship to:

ATTN: Andrew Cline

NASA/ Kennedy Space Center

BOSS Warehouse – Bldg. M6-0744

Kennedy Space Center

ORLANDO FL 32899