SATPC0035280 Tab 04 4 SOW_Redacted.pdf
PDF 116 KB Posted
- Attached to
- Rental on M400 and consult
- Solicitation number
- 80NSSC24872247Q
About this file
This document is a NASA Statement of Work for a printer rental contract. The vendor shall deliver additively manufactured blocks of specified dimensions using NASA Glenn Research Center (GRC) supplied powders. The alloys provided are considered intellectual property and under a provisional patent. This is a research and development effort, and the printed specimens will be accepted on a best-effort basis. The vendor must safeguard the design files and remaining alloy powders, and return them to GRC upon request.
The key deliverables are: 1) Optimize build parameters using 1000 lbs of GRX-810 powder printed on an EOS M400 for one month, and provide 4 cuboid mechanical test specimen blanks and a witness specimen, 2) Build additional cuboid mechanical test specimen blanks and witness specimens per provided CAD files and dimensions for future prints. The related federal contract opportunity is a NASA rental on an M400 and consulting services, with a solicitation number of 80NSSC24872247Q.
View the file
Other files
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
NASA Statement of Work – Printer rental
05/30/2024
1.0 Scope of Work
The vendor shall deliver additively manufactured blocks of specified dimensions using NASA Glenn
Research Center (GRC) supplied powders. The alloys that will be provided should be treated as intellectual property and is currently under a provisional patent. This is a research and development effort and the printed specimens and components under this agreement will be accepted on a best-effort basis. The design files and remaining alloy powders should be safeguarded at by the vendor and upon request, the alloy powders and all electronic or paper files pertaining to the designs shall be returned to GRC.
2.0 Deliverables
1.) GRX-810 powder (1000lbs) will be supplied to the vendor to be printed on the EOS M400 for one month using specified parameters.
From the powder optimized build parameters will be determined. Then cuboid mechanical test specimen blanks 3.4” tall by 0.63” by 0.63” wide will be built and supplied to GRC. Additional samples will be made during the same build to act as a witness specimen.
From the powder and build parameters 4 cuboid mechanical test specimen blanks measuring 3.4” x
0.63” x 0.63” will need to be built and supplied to GRC. A witness specimen (0.5”x0.5”x0.5”) will be supplied from the same build. After this build, CAD files of components and other dimensions will be provided for future prints.
File details come from the government source that posted it. Updated .