SATPC0033794 Tab 04 4 SOW.pdf
PDF 110 KB Posted
- Attached to
- Aeva Aeries II Lidar Sensor and Technica Media Converter Federal contract opportunity
- Solicitation number
- 80NSSC24856949Q
About this file
This statement of work outlines requirements for the purchase of an Aeva Aeries II LiDAR sensor and Technica media converter. The National Aeronautics and Space Administration Johnson Space Center requires one Aeva Aeries II LiDAR sensor with a range of 100 meters, 35 degree horizontal field of view, 0.025 degree horizontal resolution, 17 degree vertical field of view, 0.1 degree vertical resolution, and a frame rate of 5 Hz. Also required is one Technica MC1000BASE-T1 media converter to convert between 100/1000BASE-T1 automotive Ethernet and 100/1000BASE-T standard Ethernet with force slave mode and link status output via a special MQS connector. Products are to be delivered to NASA Johnson Space Center in Houston, Texas within 6-8 weeks of award of solicitation number 80NSSC24856949Q issued by the National Aeronautics and Space Administration Shared Services Center.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| SATPC0033794 Tab 10 BNJ redacted.pdf | ||
| SATPC0033794 Tab 10 Open Market RFQ.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
STATEMENT OF WORK
1. Objective/Requirements Johnson Space Center (JSC) has a requirement to purchase and Aeva Aeries II LiDAR Sensor and Technica Matenet Media Converter.
2. Characteristics, Scope, and Specs
Aeva Aeries II LiDAR Sensor
Range for 10% Reflectivity target: 100 m Horizontal FoV: 35 degrees H Resolution: 0.025 degrees Vertical FoV: 17 degrees Vertical Resolution: 0.1 degrees (with Ultra resolution 0.05 degrees) Range Resolution: 2.5 cm Frame Rate: 5 Hz
Technica MC1000BASE-T1 MATENET Media Converter
4 × DIP switches 7 × Status LEDs (2 of them at the RJ-45 port) 1 × RJ-45 port for 100/1000BASE-T Standard Ethernet 1 × MATEnet port for 100/1000BASE-T1 Automotive Ethernet 1 × MQS connector Voltage range: 12 to 24 volt DC Power consumption: 2 Watt Robust, galvanized sheet steel with black powder coating housing Size 89 × 72 × 28 mm Converts between 100/1000BASE-T1 Automotive Ethernet and 100BASE-
TX/1000BASE-T Standard Ethernet Force Slave mode and link down (input) and povide link status (output) via special MQS connector Debugging possible via Micro HDMI connection Configuration via DIP switch:
DIP switch 1: Master/Slave DIP switch 2: 100/1000 Mbps DIP switch 3: IEEE-/Legacy-mode DIP switch 4: Frame Generator
3. Place of Performance Davis Adams NASA Lydon B Johnson Space Center 2101 Nasa Parkway JSC Central Receiving, Building 420 Houston TX 77058-3607
4. Period of Performance
6-8 Weeks ARO
File details come from the government source that posted it. Updated .