80760 - PD.pdf

PURCHASE DESCRIPTION

“URGENT” – KT300D Piston Pump

3 Feb 2026

1. DESCRIPTION. The Contractor shall provide all the necessary labor, materials, equipment, tools, and transportation to provide two (2) KT Rotary Piston Pumps to the Commodities Maintenance Group (CMXG) Warner Robins Air Logistics Complex (WR-ALC) at Robins Air Force Base (AFB), Georgia

1.1 Detail the Commodity/Deliverables:

Part # Description Quantity KT300D-S000 Kinney-Tuthill KT300D Piston Pump 2

2. Service Support.

2.1 Delivery.

2.1.1 Government Representatives. The following individuals will serve as the

Primary and Alternate Government Representatives as the points of contact through which all contractor-provided services will be requested and accomplished for MXSG. Government Representatives will not supervise the Contractor, and they are not empowered to make any contractual commitments or to authorize any contractual changes on the Government’s behalf. The following individuals will serve as Government Representatives for MXSG.

2.2 Shipping/Delivery/Period of Performance. The Contractor shall provide delivery twelve (12) weeks after contract award. Delivery will be FOB Destination.

2.3 Ship To Address.

Attention: Sandra Gibbs Unit: 402 MXSG/MXDPM

DODAAC: F3QCBK

235 Robins Pkwy, Station 15, Bldg 321

Robins AFB, GA 31098-1621

Primary Government Representative Alternate Government Representative Name: Sandra Gibbs Name: Reginald Burnette Unit: 402 MXSG/MXDPM Unit: 402 MXSG/MXDPM Phone: (478) 222-0920 Phone: (478) 222-0655 Email: sandra.gibbs@us.af.mil Email: reginald.burnette@us.af.mil mailto:sandra.gibbs@us.af.mil mailto:reginald.burnette@us.af.mil

2.4 Incidental Services. None.

2.5 Warranty. The Contractor shall provide their thirty (30) month warranty (see attached manufacturer warranty).

2.6 Options. None.

3. Government Furnished Equipment and Services or Government Furnished Property

(GFP) and services. None.

4. General Information.

4.1 Security Requirements.

4.4.1 Government Security Regulations. The Contractor shall ensure personnel, information, system, facility, and international security requirements are met in accordance with 32 CFR Part 117, National Industrial Security Program Operating Manual (NISPOM), Department of the Air Force Instruction (DAFI) 31-101, Base Defense Operations.

4.4.2 Communications Security (COMSEC). The Contractor shall use only secure communications methods and/or equipment to transmit or otherwise transfer classified and/or sensitive, but unclassified, information in accordance with 32 CFR Part 117.21, National Industrial Security Program Operating Manual (NISPOM).

4.4.3 Operations Security (OPSEC). The purpose of OPSEC is to reduce the vulnerability of USAF missions to adversary collection and exploitation of critical information. The Contractor shall comply with DoDD 5205.02E “DoD Operations Security (OPSEC) Program”, DoD Manual 5205.02 “DoD Operations Security (OPSEC) Program Manual” and AFI 10-701 “Operations Security (OPSEC)” to protect United States (U.S. Government interest. The Contractor shall ensure compliance with OPSEC requirements including procedures to protect classified and/or sensitive, but unclassified, Government projects and/or programs. The Contractor shall ensure Contractor personnel who perform work at Robins AFB or another Government facility comply with the OPSEC procedures of the facility.

4.4.4 Security Incident or Violation. The Contractor shall immediately notify the

Government Security Office of any potential or actual security incidents or violations including potential or actual unauthorized disclosure or compromise of classified and/or sensitive, but unclassified, information.

4.2 Supply Chain Risk Management. The Contractor shall implement risk management procedures to ensure that system, equipment, components, software, maintenance equipment, and supplies do not incorporate counterfeit parts, malicious code, or other elements that would allow adversaries to gain access to data and critical program information and disrupt operations. Contractor risk management procedures shall comply with:

DoDI5000.83 DAFI 63-113, Program Protection Planning for Life Cycle

Management, SAE Aerospace Standard AS5553D, Counterfeit Electrical, Electronic, and

Electromechanical (EEE) Parts; Avoidance, Detection, Mitigation and Disposition, National Institute of Standards and Technology (NIST) Special Publication 800-53

Rev 5, Security and Privacy Controls for Information Systems and Organizations.

4.3 Agency Affirmative Procurement Program. In accordance with FAR 23.107-1 and FAR 23.107-2, 100% of purchases of Environmental Protection Agency (EPA)-designated products included in the Comprehensive Procurement Guidelines (CPG) list [https://www.epa.gov/smm/comprehensive-procurement-guideline-cpg-program] and/or United States Department of Agriculture (USDA)-designated products included in the bio based product listings [http://www.biopreferred.gov] shall, at a minimum, meet the EPA or USDA standards for recovered materials or bio based content, respectively, unless an item cannot be acquired competitively within a realistic timeframe, meet appropriate performance standards, and/or be acquired at a reasonable price.

4.3.1 The Contractor shall provide estimates and verification of recovered material for

EPA-designated CPG products and certification for both EPA-designated CPG products and USDA-designated bio based products. In accordance with the Robins Air Force Base, Georgia / Affirmative Procurement Program (formerly Green Procurement Program (GPP)) Plan, the Contractor shall provide estimates and certifications to the Government for completion of the applicable attachment(s) to be included in the Purchase Request (PR) package.

4.4 Inspection of Services/Inspection of Supply: In accordance with the Inspection of

Supply/Services clause(s) identified in the contract/order, the Government reserves the right to inspect Contractor performance.

4.5 Invoice/Payment and Receipt/Acceptance: In accordance with DFARS clause

252.232-7003, Electronic submission of Payment Requests and Receiving Reports, the Contractor shall submit/process payment requests (invoices, Receiving Reports or combos) and receipt/acceptance documents via Procurement Integrated Enterprise Environment (PIEE) through module Wide Area Workflow (WAWF). Access at the following site: https://piee.eb.mil/

5. Appendices.

5.1 Manufacturer warranty information

5.2 Photos of MD Kinney KT Rotary Piston Pump

http://www.biopreferred.gov/ https://piee.eb.mil/