77352 - Updated ECS Bay LIfts PD.docx

1.1 Detail the Commodity/Deliverables:

1.1.1 General Lift Information

· Lowered Height of Lift Only: Minimum 7 inches

· Total Lowered Height: Minimum 7.5 inches

· Travel Required: Minimum 54 inches

· Raised height: Minimum 61.5 Inches

· Capactity: 1,500 lbs Maximum

· Mouthing: Surface

1.1.2 General Platform Information

· Width: 30 inches Maximum – change to 24 inches

· Length: 42 inches Maximum – change to 36 inches

· Sides: Straight

· Surface: Smooth – Grit

· Lift Finish

· Type Paint – Enamel

· Color: AQ Black or equivalent

· RAL: 9005 (Jet Black) or equivalent

1.1.3 Platform Features

· Width: Minimum 17.5” Maximum 24”

· Length: 24” Minimum 36” Maximum

· Height: 6.12” Lowered – 54.125” Rai

· Type: Accordion – Standard Material

· Location on Lift: Outboard Perimeter – Outward Fold (See Platform Side Features section below for what sides skirt is on

1.1.4 Base Features – Transport Base Features

· Type: Portability

· Wheel Mounting: End – Four wheels/locking

· Direction of Travel: Forward/Reverse

· Wheel Material: Steel or hydraulic/oil/fuel resistant

· Wheel Options: (2) Flat – 4 with two rotational

· Floor Lock (s): End Mounted

1.1.5 Additional Base Feature Notes

· Baseframe Perimeter Accordion Skirt Tray

1.1.6 Voltages

· Primary: 115/1PH/60Hz

· Secondary: 24VAC

1.1.7 Fluid

· Type 5W-30 or equivalent – Can be pneumatically operated as well

1.1.8 Power Unit – Single Phase

· Type: Electro-Hydraulic

· Horsepower (FLA): 0.75 HP (13.8 Amps) or equivalent

· Location: Internal

· Wired To: Control Panel

· Raise Time: 29 seconds Maximum

· Lower Time: 7 seconds Maximum (lower time shown with lift fully loaded)

· Pump Flow Rate: 0.7 GPM Maximum to Achieve Raise Time

· Flow Control Flow Rate: 3 GPM Maximum to Achieve lower Time

1.1.9.1 Controls

· Control Method: Press and Hold

· Control Panel Locataction: Mounted to Power Unit

· Control Signal: 1 Qty

· Type: Foot Switch – or handheld

· Mounting: Mounted to Platform

· Wired To: Control Panel

· Operators: Up/Down

1.2 NEMA Ratings

· Control Panel: Meets or exceeds Nema 1

· Controls Signal(s): Meets or exceeds Nema 1

· Power Unit: Meets or exceeds Nema 1

· Lift Components: Meets or exceeds Nema 1

1.3 The Contractor shall provide drawings to the Government for review prior to beginning fabrication of the Low Profile Scissor Bay Lifts. The Contractor shall electronically send the drawings in Adobe Portable Document Format (PDF) to the Government Point of Contacts (POCs) listed below in paragraph 2.1.1 within three (3) weeks after contract award. The Contractor shall relinquish owndership of the designs to Robins AFB. The Government shall review the drawings and approve them within two (2) weeks of receiving the drawings. (CDRL A001, DI-SESS-80776B NOT 1, Technical Data Package (TDP).

1.3 Warranty. The Contractor shall provide a standard one-year warranty stating that all products of its manufacture shall be free from defects in materials and workmanship. If no later than twelve (12) months after delivery of the product, any delivered product is found to be defective in material or workmanship, the Contractor shall, at its option, repair, replace for such defective part at its expense and with reasonable promptness provided the ContEractor confirms existence of said defect. The Government shall provide the Contractor with written notice of a claimed defect within thirty (30) days after the defect becomes apparent to the Government.

The contractor shall provide one (1) electronic copy of operation and maintenance manuals on the ECS Bay Lifts within three (3) calendar days after delivery of the equipment.