772866-event.pdf

Awarded To: GTS Forestry Inc

Awarded to GTS Forestry for lowest responsive bid.

Upper Mammoth-Elk Ridge Cut and Pile Utah Division of Forestry, Fire and State Lands. Wildfire reduction, cut and pile, 51.3 acres West of Hatch, Utah.

Open 8/2/2019 8:30 AM MDT Type Invitation for Bid

Close 8/9/2019 2:00 PM MDT Number AS20023 Currency US Dollar

Sealed Until 8/9/2019 2:00 PM MDT

Contacts

Ann Schliep aschliep@utah.gov

Commodity Codes

Commodity Code Description

70111 Removal services for ornamental plants or bushes or trees including tree and shrub removal services and lop and scatter and chaining and harrow and bullhog

Description

Issuing Procurement Unit State of Utah Division of Purchasing Conducting Procurement Unit State of Utah Division of Forestry, Fire and State Lands

INVITATION FOR BIDS

Upper Mammoth-Elk Ridge Cut and Pile

SOLICITATION #AS20023

This Invitation for Bids "IFB" is issued in accordance with State of Utah Procurement Code and the Utah Administrative Code.

If any provision of this IFB conflicts with the Utah Procurement Code or the Utah Administrative Code, then the Utah Procurement Code and then the Utah Administrative Code will take precedence.

Purpose of this Solicitation

The purpose of this IFB is to enter into a contract with the lowest responsive and responsible bidder to provide: wildland fire hazard reduction by hand treating cutting/piling standing live and dead trees. This task order includes the Contractor to furnish labor, equipment, supervision, transportation, operating supplies, and incidentals. Project area totals approximately 51.3 acres as identified on the attached site map.

Closing date and time

The closing date and time for this sourcing event are 08/09/2019 02:00 PMMountain Time. If your time is different from that shown, your profile may be set to a different time zone. Please see the attachment titled "Changing Your Time Zone" in the Buyer Attachments section for directions on how to update your profile. It is your responsibility to make sure you submit your response by the date and time indicated above.

Bid Openings

12 August 201912 August 2019 mailto:aschliep@utah.gov mailto:aschliep@utah.gov mailto:aschliep@utah.gov

The bid opening for this solicitation will NOT take place in person. “Unofficial Results” will be posted to the solicitation in SciQuest after the solicitation has closed. The Unofficial Results DO NOT constitute an award for the bid. Unofficial Results are being uploaded online in order to promote fairness to all vendors, regardless of physical geographic location.

SITE SPECIFICS:

Description: Work under this contract is located on Cedar Mountain. The treatment site consists of 3 individual units. Two units consist of understory thinning in Ponderosa Pine stands. The other unit is a mixed conifer stand treatment. The treatment boundaries will not be flagged and must be located by an electronic device capable of loading geo-referenced PDF maps. The work location is shown on the general location and site maps. Note* one section of a unit boundary in Spring Hollow has been flagged adjacent to a different landowner inholding to avoid any conflict.

Access to the site: Access onto the project site is provided by a combination of paved highways, county dirt surface roads and jeep trails. Four (4) wheel drive vehicles are recommended in and around the project area. It will be the contractor’s responsibility to get the equipment to the work site.

SPECIFIC TASKS: (SOW)

Elk Ridge Unit 29.3 Acres (no work in the unit during August 18-31)

• All Juniper trees within the treatment area will be cut.

• Juniper stems will be set aside for firewood.

• Junipers stems will be left in single whole pieces being limbed and toped where diameter hits 4 inches.

• Ponderosa < 8” DBH will be cut not to exceed 25-foot average crown spacing.

• Bristlecone Pine are not to be cut.

• The contractor will provide varying size classes with good form and vigor, as leave trees.

• All stumps or bases of trees will be cut flat and within six (6) inches of the ground.

• No live limbs shall be left on the stump of cut trees. (Whips)

• Trees identified as bearing trees, or any trees blazed or tagged to mark the lines of any Government survey, shall not be cut or destroyed under penalty of the law.

• Dead standing trees will be left standing.

• All coarse woody debris on the ground will be constructed into burn piles.

• All material in burn piles will be cut into four (4) foot lengths or less.

• All material in the unit will be constructed tightly into burn piles at a distance of fifteen (15) feet away from the drip line of any leave tree.

• Piles will be spaced fifteen (15) feet apart measured from widest outside point to widest outside point forming a grid-like order of piles.

• Additional shagging of the material may be required in order to accomplish the pile grid.

• Piles will be constructed in a Tepee like a manner, with heavier material around the outside edges of the pile.

• Piles must be five (5) feet in diameter by Ten (10) feet high.

• Piles will be clear of all bio-mass measuring from the widest outside edge of burn piles to (10) ten feet out.

• Notice to the bidder, additional bucking may be necessary to meet pile specs (i.e.)

compactness.

Spring Hollow Unit (13 Acres) (no work in the unit between September 8th-11th)

1. Thinning:

• Cut no live Aspen or Bristlecone Pine.

• Cut no live Ponderosa pine greater than 8 inches diameter at breast height (dbh) unless infected with Mistletoe (see below).

• Remove ALL conifer trees 18 inches tall to 8 inches dbh.

• Remove ALL Juniper 18 inches tall to 8 inches diameter at root collar (drc).

• Remaining conifer trees 8 inches dbh and greater should be thinned to 18 x 18 feet spacing, leaving approximately 134 trees per acre. Spacing may vary by up to 100%. Aspen is not to be considered in spacing.

• In areas where trees 8 inches dbh and larger are absent, trees smaller than 8 inches dbh should be thinned to 20 x 20 feet spacing, leaving approximately 134 trees per acre.

• Species Preference (descending order): Ponderosa Pine, Douglas-fir, Limber pine, Spruce, White fir, Sub Alpine fir.12 August 201912 August 2019

• Remaining trees should be undamaged.

• Ladder fuels on remaining trees greater than 8 inches dbh will be pruned to 6 feet.

• Stump heights should be 6 inches or less on the uphill side.

• Stumps will have no live limbs greater than 1/4 inch in diameter.

• Cut all snags except retain 3 snags per acre. Conifer snags are at least 18 inches dbh and 30 feet tall and aspen snags are at least 8 inches dbh and 15 feet tall. If desired size is not on site, the next largest size snag(s) will be left.

• Mistletoe infected Trees:

o Any tree with a Hawksworth Mistletoe Rating of 2 or greater up to 18 inches dbh should be felled.

o Any tree with a Hawksworth Mistletoe Rating of 2 or greater and larger than 18 inches dbh within 100 feet of legal roads or trails should be felled.

Hawksworth Mistletoe Rating Guide:

2. Hand Piling: Slash and boles will be hand piled to facilitate burning- this includes activity and natural material. All material with a minimum of size of 1-inch diameter and 18 inches in length up to 8 inches diameter shall be piled. Piles shall be:

• Tee-Pee –shaped. Taller than they are wide (minimum of 5 feet tall).

• Placed in open areas away from residual trees (out of the drip line) and not on top of logs or stumps. Have 12 inches clearance from any remaining logs or slash above or within the litter layer.

• Piles will be placed a minimum of 20 feet away from snags.

• Free of dirt and trash.

• Have no logs or sticks extending from the piles more than 12 inches.

• Solid and compacted. Not hollow.

• All material greater than 10 inches diameter will be left in place and limbed flush to the bole. Boles being left will not be bucked/cut except as needed to remove limbs flush to the bole.

3. Other Requirements: The following areas shall be free from treatment slash, piles and tree boles created by this project:

• Perennial streams for a distance of 15 feet.

• Cut and fill slopes.

• Ditches, rolling dips, water bars, and other water management features.

• Culverts for a distance of 15 feet.

• Improvements such as roads, established trails, telephone, power line, stock driveways, fences, established land corners, etc.

• Piles will be burned at a later date by FFSL personnel when conditions are safe and in compliance with air quality guidelines.

• Older woody material in contact with the ground and starting to decompose does not need to be treated and should not be disturbed if possible.

• Use caution along the road during felling operations and block traffic on trails when necessary to protect landowners and any public that may cross from federal land. Awareness of possible landowners/publics around the units is advised.

Upper Mammoth Unit (9 Acres)

• All trees marked with blue paint within the treatment area will be cut and piled. (These marked trees are in addition to the prescription applied below as they were part of an older unit.)

• All Juniper trees within the treatment area will be cut and piled.

• All White Pine within the treatment area will be cut and piled.

• All standing dead < 20” DBH will be cut and piled.

• Ponderosa and Douglas fir < 8” DBH will be cut not to exceed 25-foot average crown spacing.

• The contractor will provide varying size classes with good form and vigor, as leave trees.

• All stumps or bases of trees will be cut flat and within six (6) inches of the ground.

• No live limbs shall be left on the stump of cut trees. (Whips)

• Trees identified as bearing trees, or any trees blazed or tagged to mark the lines of any Government survey, shall not be cut or destroyed under penalty of the law.

• All coarse woody debris on the ground will be constructed into burn piles.

• All material in burn piles will be cut into four (4) foot lengths or less.

• All material in the unit will be constructed tightly into burn piles at a distance of fifteen (15) feet away from the drip line of any leave tree.

• Piles will be spaced fifteen (15) feet apart measured from widest outside point to widest outside point forming a grid-like order of piles. 12 August 201912 August 2019

• Additional shagging of the material may be required in order to accomplish the pile grid.

• Piles will be constructed in a Tepee like manner, with heavier material around the outside edges of the pile.

• Piles must be five (5) feet in diameter by Ten (10) feet high.

• Piles will be clear of all bio-mass measuring from the widest outside edge of burn piles to (10) ten feet out.

• Notice to the bidder, additional bucking may be necessary to meet pile specs (i.e.) compactness.

CONTRACTOR FURNISHED EQUIPMENT:

Equipment Requirements: Portable toilet(s) are required to be provided for contractor employees by the contractor. One chemical toilet at the job site for 20 employees or less will be required. These facilities must be provided, utilized, and maintained by the contractor and their employees.

All other equipment required to accomplish the job.

GOVERNMENT FURNISHED PROPERTY:

No Government property shall be furnished on this project.

This contract will result in one purchase order contract award to the lowest cost responsive and responsible bidder.

Length of the Contract

The project must be completed by September 30, 2019.

Issuing Procurement Unit, Conducting Procurement Unit, and Solicitation Number

The State of Utah Division of Purchasing is the issuing procurement unit and State of Utah Division of Forestry, Fire and State Lands is the conducting procurement unit for this IFB (referred to as “the State”). The reference number for this IFB is Solicitation #AS20023. This solicitation number must be referred to on all bids, correspondence, and documentation submitted to the State relating to this IFB.

Additional Information:

Site Visits:

A site visit will NOT be held prior to bidding. It is strongly recommended that each potential bidder inspect the site where services are to be performed and to satisfy themselves regarding all general and local conditions that may affect the cost of contract performance, to the extent that the information is reasonably obtainable. In no event, shall failure to inspect the site constitute grounds for a claim after contract award.

To request permission to enter private property involved in this solicitation contact John Schmidt 435-586-4408. NO QUESTIONS SHOULD BE ASKED OF JOHN SCHMIDT or bidders may be disqualified. All questions are to be asked through the Q&A section of this solicitation.

It is strongly recommended that each potential bidder ensure that he/she has a complete understanding of the requirements of this project. Bidders are urged to inspect the site where services are to be performed and to satisfy themselves regarding all general and local conditions that may affect the cost of contract performance, to the extent that the information is reasonably obtainable. In no event, shall failure to inspect the site constitute grounds for a claim after contract award.

Shape Files:

Maps and/or shapefiles are attached in the Buyer Attachments Section of this solicitation. If bidder needs additional maps/files, please specify the type in the Q&A Section of this solicitation.

Under no circumstances shall the shape/KML/PDF files by considered part of the contractual document. They will be provided for informational purposes only. Any .pdf files provided in this bid document and the actual physical site location shall govern any contractual interpretation or dispute related to this project.

Bidders are prohibited from communications regarding this IFB with the conducting procurement unit staff, evaluation committee members, or other associated individuals EXCEPT for the State of Utah Division of Purchasing procurement officer overseeing this IFB.

12 August 201912 August 2019

Wherever in this IFB, an item is defined by using a tradename, brand name, or a manufacturer and/or model number, it is intended that the words, “or equivalent” apply; and invites the submission of equivalent products by the Bidders.

Bidders may be required to submit product samples to assist the chief procurement officer or head of a procurement unit with independent procurement authority in evaluating whether a procurement item meets the specifications and other requirements set forth in the invitation to bid. Product samples must be furnished free of charge unless otherwise stated in the invitation for bids, and if not destroyed by testing, will upon written request within any deadline stated in the invitation for bids, be returned at the bidder's expense. Samples must be labeled or otherwise identified as specified in the invitation for bids by the procurement unit.

Evaluation of Bids

Each bid received shall be evaluated for responsiveness in as outlined in the Utah Procurement Code. This IFB shall be evaluated by the objective criteria described in this IFB. Bids submitted must comply with the prerequisites and questions sections of this IFB. Any bid that does not comply with the prerequisite and questions sections will be deemed non-responsive and will be rejected.

Multiple or alternate bids will not be accepted, unless otherwise specifically required or allowed in the invitation for bids. If a bidder submits multiple or alternate bids that are not requested in this IFB, the chief procurement officer or head of a procurement unit with independent procurement authority will only accept the bidder's primary bid and will not accept any other bids constituting multiple or alternate bids.

Any exceptions to the content of this IFB, including the prerequisites, must be protested in writing to the Division of Purchasing prior to the closing date.

To be responsive and responsible Bidders must review and respond to the following sections of this IFB: Prerequisites, Buyer Attachments, Questions, and Items.

• The Prerequisites Section contains the objective criteria that will be used to evaluate the bids, including the mandatory minimum requirements and general requirements that Bidders must certify that they have read, understand, and agree to in order to submit a bid.

• The Buyer Attachments Section contains the required State of Utah Terms and Conditions of the IFB, which are non-negotiable, and other documents required for this IFB.

• The Questions Section contains the questions that Bidders are required to answer in order to submit a bid.

• The Items Section contains a detailed description of the procurement items being sought and allows the Bidders to provide their bids.

Bidders must review each section of this IFB carefully.

Required to View Event

Prerequisites Required to Enter Bid

1. Bidders are encouraged to review this IFB prior to the deadline to submit a bid, even if a bid has been submitted, in case an addendum has been issued by the issuing procurement unit.

2. All questions must be submitted through SciQuest during the Question and Answer period.

3. A Bidder must guarantee its pricing for the period described in this IFB.

4. Bidders must accept the Standard Terms and Conditions that have been attached to this IFB. See Buyer Attachments Section.

5. The proposed Scope of Work has been attached to this IFB - Attachment B. See Buyer Attachments section.

6. Any Bidder requesting that part of its bid be protected shall include with the bid a Claim of Business Confidentiality. See Questions Section for uploading a Claim of Business Confidentiality form.

7.

The mandatory minimum requirements are the objective criteria in which the conducting procurement unit will evaluate bids. Bidders must upload a document which provides a point by point response to the mandatory minimums listed in this prerequisite.

8. The issuing procurement unit may not accept a bid after the time for submission of a bid has expired.

9. Bids must be submitted electronically, through SciQuest.

10. The cost for this IFB will be evaluated as described in this prerequisite.

11. Bids will be opened in accordance with Utah Code 63G-6a-604.

Buyer Attachments

1. Claim of Business Confidentiality Form

2. Performance evaluation document--- FOR REFERENCE USE ONLY.

3. Changing your Time Zone

4. Attachment A Terms and Conditions for Services (Purchase Orders)

5. Attachment B Scope of Work

6. Map Elk Ridge Unit Map

7. Map Elk Ridge Upper Mammoth Spring Hollow General location Map

8. Map Upper Mammoth and Spring Hollow Units Map

Questions Required Questions

Group 1: Acceptance of Prerequisites

1.1 Do you agree to the Rangeland Standard Terms and Conditions that have been attached to this IFB?

1.2

Does your firm assert a claim of business confidentiality for any of the following information submitted in response to this solicitation? If yes please attach the following business confidentiality claim as part of your bid. In addition, please attach a redacted copy of any document that contains confidential information.

1.3

Bidder acknowledges it has read the Attachment B Scope of Work and understands its obligations and responsibilities contained therein, which must be met if awarded a contract.

By submitting a bid, Bidder certifies that it can meet or exceed all of the requirements in the Attachment B. Failure to meet the required obligations and responsibilities, if awarded a contract, may result in bidder being non-responsible and the contract may be canceled.

1.4

Is Bidder presently or has Bidder ever been debarred, suspended, proposed for debarment, or declared ineligible by any governmental department or agency, whether international, national, state, or local? If yes, Bidder must provide a statement regarding its debarment or suspension.

1.5 Is Bidder an employee of the State of Utah? If yes, then Bidder must submit an external employment form signed by Bidder's manager at the State of Utah.

1.6

Bidder acknowledges that it must acquire and maintain all applicable federal, state, and local licenses before the contract is entered into. Licenses must be maintained throughout the entire contract period. Persons doing business as an Individual, Association, Partnership, Corporation, or otherwise shall be registered with the Utah State Division of Corporations and Commercial Code. NOTE: Forms and information on registration may be obtained by calling (801) 530-4849 or toll free at 877-526-3994, or by accessing:

www.commerce.utah.gov.

1.7 Bidder acknowledges that it has uploaded a document providing a point-by-point response to the mandatory minimum requirements prerequisite and any other prerequisite that required a document to be uploaded.

1.8 Does Bidder have an outstanding tax lien in the State of Utah?

1.9 Bidder acknowledges that a Performance Evaluation will be performed on this project and that they will be required to work with the project manager.

1.10

Bidder acknowledges that the “Unofficial Results” posted at the end of the solicitation do not constitute an award for the bid, but are uploaded for bid opening purposes. Official notification of award will go out by email after all bids have been evaluated by the State.

Official Bid Results will then be uploaded to the solicitation.

Group 2: Vendor Information

2.1 Please provide your firm's legal company name.

2.2 Please provide your federal tax identification number? (If the vendor is sole proprietor please do not provide your social security number.)

2.3 Please provide your firm's contact information for this contract, including the name, phone number, and email address of your firm's authorized representative.

2.4 Please provide your ordering address and the remit to address. Please clearly identify each address.

2.5 Please provide your firm's State of Utah Sales Tax ID Number.

2.6 Identify your firm's type of business.

Group 3: Vendor's Submission

12 August 201912 August 2019 https://s3.amazonaws.com/solutions-selectsite-documents/Sourcingevent/772866-385387088confidentialityclaimform%20%281%29.doc?AWSAccessKeyId=AKIAJ5HNJE5DFBZ5ONSA&Expires=1628696826&Signature=IoO9pNyprIigj7r4FkhlZ4nQC%2Fg%3D https://s3.amazonaws.com/solutions-selectsite-documents/Sourcingevent/772866-385387088confidentialityclaimform%20%281%29.doc?AWSAccessKeyId=AKIAJ5HNJE5DFBZ5ONSA&Expires=1628696826&Signature=IoO9pNyprIigj7r4FkhlZ4nQC%2Fg%3D https://s3.amazonaws.com/solutions-selectsite-documents/Sourcingevent/772866-554761320Contract%20Performance%20Evaluation%20FOR%20REFERENCE%20USE%20ONLY.pdf?AWSAccessKeyId=AKIAJ5HNJE5DFBZ5ONSA&Expires=1628696826&Signature=dHJsTPiqRLPOAhCDn040j7KUHtk%3D https://s3.amazonaws.com/solutions-selectsite-documents/Sourcingevent/772866-554761320Contract%20Performance%20Evaluation%20FOR%20REFERENCE%20USE%20ONLY.pdf?AWSAccessKeyId=AKIAJ5HNJE5DFBZ5ONSA&Expires=1628696826&Signature=dHJsTPiqRLPOAhCDn040j7KUHtk%3D https://s3.amazonaws.com/solutions-selectsite-documents/Sourcingevent/772866-566044729Changing%20Your%20Time%20Zone.pptx?AWSAccessKeyId=AKIAJ5HNJE5DFBZ5ONSA&Expires=1628696826&Signature=0rvRv5OCpC5H6yEFA%2BjJsrrp%2FAg%3D https://s3.amazonaws.com/solutions-selectsite-documents/Sourcingevent/772866-566044729Changing%20Your%20Time%20Zone.pptx?AWSAccessKeyId=AKIAJ5HNJE5DFBZ5ONSA&Expires=1628696826&Signature=0rvRv5OCpC5H6yEFA%2BjJsrrp%2FAg%3D https://s3.amazonaws.com/solutions-selectsite-documents/Sourcingevent/772866-801186952termsposervice-051319.docx?AWSAccessKeyId=AKIAJ5HNJE5DFBZ5ONSA&Expires=1628696826&Signature=xC6%2FMfqQ72PaRdoBK8IdnXlVLyY%3D https://s3.amazonaws.com/solutions-selectsite-documents/Sourcingevent/772866-801186952termsposervice-051319.docx?AWSAccessKeyId=AKIAJ5HNJE5DFBZ5ONSA&Expires=1628696826&Signature=xC6%2FMfqQ72PaRdoBK8IdnXlVLyY%3D https://s3.amazonaws.com/solutions-selectsite-documents/Sourcingevent/772866-832397767Attachment%20B%20Scope%20of%20Work.docx?AWSAccessKeyId=AKIAJ5HNJE5DFBZ5ONSA&Expires=1628696826&Signature=OOHVLSnqn9QY7u8nx3helBF7TOw%3D https://s3.amazonaws.com/solutions-selectsite-documents/Sourcingevent/772866-832397767Attachment%20B%20Scope%20of%20Work.docx?AWSAccessKeyId=AKIAJ5HNJE5DFBZ5ONSA&Expires=1628696826&Signature=OOHVLSnqn9QY7u8nx3helBF7TOw%3D https://s3.amazonaws.com/solutions-selectsite-documents/Sourcingevent/772866-832398306Elk%20Ridge%20Unit%20Map.pdf?AWSAccessKeyId=AKIAJ5HNJE5DFBZ5ONSA&Expires=1628696826&Signature=ptbxfpvRe4xE031zwhPaoLh1T14%3D https://s3.amazonaws.com/solutions-selectsite-documents/Sourcingevent/772866-832398306Elk%20Ridge%20Unit%20Map.pdf?AWSAccessKeyId=AKIAJ5HNJE5DFBZ5ONSA&Expires=1628696826&Signature=ptbxfpvRe4xE031zwhPaoLh1T14%3D https://s3.amazonaws.com/solutions-selectsite-documents/Sourcingevent/772866-832398387Elk%20Ridge%20Upper%20Mammoth%20Spring%20Hollow%20General%20location%20Map.pdf?AWSAccessKeyId=AKIAJ5HNJE5DFBZ5ONSA&Expires=1628696826&Signature=tAe82g9wfrQdYCehbDHaz5RMd74%3D https://s3.amazonaws.com/solutions-selectsite-documents/Sourcingevent/772866-832398387Elk%20Ridge%20Upper%20Mammoth%20Spring%20Hollow%20General%20location%20Map.pdf?AWSAccessKeyId=AKIAJ5HNJE5DFBZ5ONSA&Expires=1628696826&Signature=tAe82g9wfrQdYCehbDHaz5RMd74%3D https://s3.amazonaws.com/solutions-selectsite-documents/Sourcingevent/772866-832399176Upper%20Mammoth%20and%20Spring%20Hollow%20Units%20Map.pdf?AWSAccessKeyId=AKIAJ5HNJE5DFBZ5ONSA&Expires=1628696826&Signature=j7vwxcQJ1BXFR4NDNCG2lQ2laDk%3D https://s3.amazonaws.com/solutions-selectsite-documents/Sourcingevent/772866-832399176Upper%20Mammoth%20and%20Spring%20Hollow%20Units%20Map.pdf?AWSAccessKeyId=AKIAJ5HNJE5DFBZ5ONSA&Expires=1628696826&Signature=j7vwxcQJ1BXFR4NDNCG2lQ2laDk%3D

3.1

Vendor understands and acknowledges that its response, including all uploaded documents, will not be considered received by the State of Utah unless the Vendor clicks submit. Even if Vendor uploads all required documents and responds to all required questions its response will not be considered if it does not click submit. Offeror acknowledges that after completing the solicitation it must click on the link in the left hand menu bar labeled “Review & Submit”, then check the box under the “Certification” heading to certify their bid. Then click the blue box labeled “Submit Response” in order to submit their bid. Once the response has been submitted, Vendor will receive a confirmation that the response was successfully submitted.

Vendors who fail to submit their response will not have their response reviewed and will be ineligible for further consideration under this solicitation.

Product Line Items Product Line Items

There are no Items added to this event.

Service Line Items Service Line Items

# Item Name, Commodity Code, Description Allow Alternates Qty. UOM Requested Service Delivery

S1 Upper Mammoth-Elk Ridge Cut and Pile 51.3 AC - Acre

Cut and pile services according to Attachment B Scope of Work.