76077-Drawing_DWG_ 200626093_Double Tier Receiver.pdf

Exception to AF 1652 for CAD generation approved by HQ AFMC/ENP (MS Office/Word 2010) 200626093_B.doc Computer Generated

APPLICATION REVISIONS

NEXT ASSY USED ON LTR DESCRIPTION DATE APPROVED

200626249-10 VDATS A REVISED PER ECO 2011A0001 20111109 CB/HT

B REVISED PER ECO 2014A0002 20141023 MB/HBT

ALL SHEETS REV: B VENDOR ITEM CONTROL DRAWING

DISTRIBUTION STATEMENT D. Distribution authorized to the Department of Defense and U.S. DoD contractors only (Critical Technology) (20 May 2008). Other requests shall be referred to AFLCMC/WNABA.

WARNING - This document contains technical data whose export is restricted by the Arms Export Control Act (Title 22, U.S.C., Sec 2751, et seq.). or the

Export Administration Act of 1979, as amended, Title 50, U.S.C., App. 2401 et seq. Violations of these export laws are subject to severe criminal penalties.

Disseminate in accordance with provisions of DoD Directive 5230.25.

DESTRUCTION NOTICE. Destroy by any method that will prevent disclosure of contents or reconstruction of the document.

UNLESS OTHERWISE SPECIFIED

DIMENSIONS ARE IN INCHES

TOLERANCES ARE

DECIMALS ANGLES APPROVALS DATE

U.S. AIR FORCE

WR-ALC, ROBINS AFB, GA 31098

.XX DRAFTSMAN

Foy Rearden 09/26/14

TITLE

.XXX CHECKER

Mike Weltman 09/26/14

DOUBLE TIER RECEIVER

DO NOT SCALE DRAWING MATERIAL ENGINEER

THIRD ANGLE

PROJECTION

PROJECT ENGINEER

W. Larry Adams Jr. 09/26/14

PROJECT AUTHORITY

Kevin D. Simpson 09/26/14

SIZE

A

CAGE CODE

98752

DRAWING NO.

200626093

REV

B

RELEASE AUTHORITY

Harold Banks 09/26/14

SCALE

NONE

CAL.WT ACT.WT SHEET

CAGE: 98752 DWG. NO.: 200626093 REV B SHEET: 2

Exception to AF Form 1652 for CAD generation approved by HQ AFMC/ENP (MS Office/Word) 200626093_B.doc Computer Generated

NOTES:

1. APPLICABLE STANDARDS/SPECIFICATIONS:

ASME Y14.5M, DIMENSIONING AND TOLERANCES.

ASME Y14.38, ABBREVIATIONS AND ACRONYMS.

MIL-STD-130M IDENTIFICATION MARKING OF U.S. MILITARY PROPERTY

2. THIS DRAWING ESTABLISHES THE REQUIREMENTS FOR A COMMERCIAL OFF THE SHELF

DOUBLE TIER RECEIVER.

3. IDENTIFICATION OF THE “SUGGESTED SOURCE(S) OF SUPPLY” HEREON IS NOT TO BE

CONSTRUED AS A GUARANTEE OF PRESENT OR CONTINUED AVAILABILITY AS A

SOURCE OF SUPPLY FOR THE ITEM(S).

4. QUALITY ASSURANCE. THE SUPPLIER SHALL VERIFY THAT UNITS SUPPLIED TO THIS

DRAWING CONFORM TO THE REQUIREMENTS SPECIFIED HEREIN.

5. VENDOR(S) SHALL MAKE NO CHANGE TO PRODUCT(S) SUPPLIED TO THE DRAWING

WHICH WOULD AFFECT INTERCHANGEABILITY OR DEGRADE EITHER PERFORMANCE OR

RELIABILITY OF THE PRODUCT WITHOUT PRIOR NOTICE

CAGE: 98752 DWG. NO.: 200626093 REV B SHEET: 3

Exception to AF Form 1652 for CAD generation approved by HQ AFMC/ENP (MS Office/Word) 200626093_B.doc Computer Generated

CONFIGURATION FOR CONTROL NUMBER -001:

DIMENSIONS ARE IN INCHES

UNLESS OTHERWISE SPECIFIED ALL DIMENSIONS ARE NOMINAL

CAGE: 98752 DWG. NO.: 200626093 REV B SHEET: 4

Exception to AF Form 1652 for CAD generation approved by HQ AFMC/ENP (MS Office/Word) 200626093_B.doc Computer Generated

CAGE: 98752 DWG. NO.: 200626093 REV B SHEET: 5

Exception to AF Form 1652 for CAD generation approved by HQ AFMC/ENP (MS Office/Word) 200626093_B.doc Computer Generated

SPECIFICATIONS FOR CONTROL NUMBER -001:

DESCRIPTION

RECEIVER, 9050, 50 MODULE, VXI AND DISCRETE

WIRING, DOUBLE TIER

WEIGHT 25 LBS [7.08 KG]

FRAME MATERIAL ANODIZED ALUMINUM

SLIDE MATERIAL NICKEL PLATED STEEL

LINKAGE, HANDLE, LATCH STAINLESS STEEL

AVAILABLE MODULE SLOTS 50 POSITIONS

CYCLE LIFE 20,000 CYCLES

TEMPERATURE -55° C TO 85° C

MAXIMUM WEIGHT SUPPORT 80 LBS @ 12 ” (36 KG @ 30.5 CM)

The 50 Module Receiver is a rugged system devised to accommodate high I/O. With high contact point availability, the 50 Module Receiver is suited for larger test and measurement systems. The top tier accomodates VXI instruments and accepts our InterConnect adapters and the bottom tier is for discrete wiring.

CONFIGURATION FOR CONTROL NUMBER -002:

CAGE: 98752 DWG. NO.: 200626093 REV B SHEET: 6

Exception to AF Form 1652 for CAD generation approved by HQ AFMC/ENP (MS Office/Word) 200626093_B.doc Computer Generated

SPECIFICATIONS FOR CONTROL NUMBER -002:

DESCRIPTION RECEIVER, 9050, REPLACEMENT HANDLE

MATERIAL STAINLESS STEEL

CYCLE LIFE 20,000 CYCLES

TEMPERATURE -55° C TO 85° C

CAGE: 98752 DWG. NO.: 200626093 REV B SHEET: 7

Exception to AF Form 1652 for CAD generation approved by HQ AFMC/ENP (MS Office/Word) 200626093_B.doc Computer Generated

CONTROL

NUMBER

SUGGESTED SOURCE(S) OF SUPPLY

SUPPLIER DATA

CAGE

CODE

MANUFACTURER’S

PART NUMBER

MANUFACTURER’S

NAME AND ADDRESS

200626093-001 18117 310-104-272

VIRGINIA PANEL CORP

1400 NEW HOPE RD

WAYNESBORO VA 22980-2647

200626093-002 18117 310-113-629

VIRGINIA PANEL CORP

1400 NEW HOPE RD

WAYNESBORO VA 22980-2647

ORDERING NOTE:

ORDER -001 FOR NEW BUILDS

ORDER -002 FOR REPLACEMENT HANDLE