751.22438.ABG - TFSP ARPA IIM - B.3 Portage Campground Electric Site Improvements - Addendum 3.pdf

PDF 2 MB Posted Jan 16, 2024

Attached to: 751/22438. ABG; Portage Campground Elec. & Site Improvements
Solicitation number: RFQ 171 240000000061 4
Issued by: Alger County, Michigan

About this file

Written by GovTribe AI · Mar 14, 2026

This is Addendum No. 3 to the Construction Documents for the Tahquamenon Falls State Park Portage Campground Electrical & Site Improvements project, issued by the Michigan Department of Technology, Management and Budget (DTMB) and Department of Natural Resources (DNR) on January 16, 2023. The project involves electrical infrastructure and site improvements at the Portage Campground, including the installation of electrical service pedestals to multiple camping sites, underground conduit systems, a main service rack with distribution panel, and connections to existing facilities. The work encompasses directional boring of conduit runs, installation of handholes, grounding systems, and coordination with utility providers for transformer placement. The bid date is Wednesday, January 17, 2024, and this addendum does not change that date. Key revisions in Addendum No. 3 include modifications to Electrical Site Plan drawing E-100 to remove a handhole from the easternmost circuit run and combine runs to a single handhole with revised conduit callouts, and clarification of a handhole designation northwest of the service rack. Drawing E-501 Electrical Details requires revision to Detail 3 to clarify handhole dimensions, with specific dimension standards provided for two handhole types (HH1 and HH2) rated as Tier 22.

The project incorporates American Reinvestment and Recovery Act (ARPA) funding through the Tahquamenon Falls State Park ARPA Infrastructure Investment and Maintenance (IIM) program, specifically designated as project B.3. Construction documents are dated October 27, 2023, with Addendum 1 issued November 14, 2023, and Addendum 2 issued January 10, 2024. The electrical work requires compliance with specific standards including minimum 36-inch below-grade installation for all conduits and wiring, use of insulated aluminum conductors, directional drilling for most conduit runs with HDPE material, and adherence to manufacturer specifications for service pedestals. The contractor must coordinate with the utility company for transformer and meter installation, provide temporary electrical service and a portable generator for the existing pump station during construction, and obtain DNR field representative or park manager approval for all pedestal locations and orientations prior to installation.

View the file

Other files

File	Type	Posted
751.22438.ABG - TFSP ARPA II&M - B.3 Portage Campground Electric & Site Improvements Plans 3.pdf	PDF	Jan 16, 2024
751.22438.ABG - TFSP ARPA II&M - B.3 Portage Campground Electric & Site Improvements Plans 1.pdf	PDF	Jan 16, 2024
751.22438.ABG - TFSP ARPA IIM - B.3 Portage Campground Electric Site Improvements - Addendum 1.pdf	PDF	Jan 16, 2024
751.22438.ABG - TFSP ARPA IIM - B.3 Portage Campground Electric Site Improvements - Addendum 2.pdf	PDF	Jan 16, 2024
751.22438.ABG - TFSP ARPA II&M - B.3 Portage Campground Electric & Site Improvements Proejct Manual.pdf	PDF	Jan 16, 2024
751.22438.ABG - TFSP ARPA II&M - B.3 Portage Campground Electric & Site Improvements Ad for Bid.pdf	PDF	Jan 16, 2024
751.22438.ABG - TFSP ARPA II&M - B.3 Portage Campground Electric & Site Improvements Plans 2.pdf	PDF	Jan 16, 2024

On GovTribe

Work with this file

Download the original file
Contacts named in this file
Similar government files
Ask GovTribe AI about this file

Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

ADDENDUM NO. 3

DATE: January 16, 2023

PROJECT: Tahquamenon Falls State Park Portage Campground Electrical & Site

Improvements

OWNER: MI DTMB/DNR

FILE NO: 751/22438.ABG

BID DATE: Wednesday, January 17, 2024**THIS ADDENDUM DOES NOT CHANGE THE BID

DATE.

The following shall be incorporated into the Contract Documents dated 2023 OCT 27.

DRAWINGS

Drawings E-100 and E-501 were intended to be issued with Addendum 2. They are attached and the sheet notes are repeated below.

E-100 ELECTRICAL SITE PLAN – ATTACHED Remove handhole from eastern most circuit run(s) to combine to single handhole. Revise conduit callout to this single handhole. Clarified handhole designation North-West of service rack as noted on site plan.

E-501 ELECTRICAL DETAILS - ATTACHED – Revise detail 3 to clarify handhole dimensions.

End of Addendum No. 3

PP1- 1,3

PP1- 2,4

PP1- 41,43

PP1- 5,7

PP1- 5,7 PP1- 5,7

PP1- 6,8

PP1- 34,36

PP1- 9,11

PP1- 10,12

PP1- 13,15

PP1- 45,47

PP1- 14,16

PP1- 17,19

PP1- 18,20

PP1- 22,24

PP1- 21,23

PP1- 22,24

PP1- 42,44

PP1- 25,27

PP1- 26,28

PP1- 25,27

PP1- 29,31

PP1- 26,28

PP1- 29,31

PP1- 26,28

PP1- 30,32

PP1- 29,31

PP1- 30,32

PP1- 29,31

PP1- 30,32

PP1- 29,31

PP1- 30,32

PP1- 29,31

PP1- 30,32

PP1- 33,35

PP1- 34,36

PP1- 33,35

PP1- 34,36

PP1- 33,35

PP1- 37,39

PP1- 38,40

HH2

HH1

HH2

PP1- 1,3HH1

PP1- 22,24

PP1- 21,23

PP1- 21,23PP1- 21,23

HH2

HH1

HH2

PP1- 9,11

PP1- 46,48

HH1

PP1- 22,24

Know what's below.

before you dig.Call

R feetGRAPHIC SCALE: FULL feetHALF

120804020

P :\7

Ta hq ua m en on

Fa lls

S ta te P ar k\

B 3_

P or ta ge C

G E le ct ric a nd S ite Im pr ov

\D ra w in gs \S ite \S he et s\ B

C O

E le ct .d w g

J an

- 1 1:

D R

A W

P A

OHM-ADVISORS.COM

ARCHITECTS ENGINEERS PLANNERS

. A

D W

O F

N O

D, D

, O R

D W

R W

O F

J N

LIN

A N

D N

P O

G E

C A

M P

G R

O U

N D

P R

O V

E M

E N

E-100

-2 2-

1/2

/10 /27

3/1

1/1

4/0

1/1

E S

U N U

C I

R C

U M

S P

I C

S I

Q U

E R E I

N I N

A M

A R

T O

C H

N O

Y , M

A N

A G

T A

N D

B U

D G

O F

A N

A D

A M

P . L

A C

H , R

A , D

A C

A D

O N

A N

D C

O N

U C

N D

RE-FEED EXISTING LIFT STATION.

SEE NOTE 9 ON E-100.

POWER FOR FUTURE PRV BLDG

AutoCAD SHX Text

SITE #3

AutoCAD SHX Text

SITE #54

AutoCAD SHX Text

SITE #48

AutoCAD SHX Text

SITE #50

AutoCAD SHX Text

SITE #19

AutoCAD SHX Text

SITE #21

AutoCAD SHX Text

SITE #35

AutoCAD SHX Text

SITE #44

AutoCAD SHX Text

SITE #45

AutoCAD SHX Text

SITE #46

AutoCAD SHX Text

SITE #52

AutoCAD SHX Text P2

AutoCAD SHX Text P4

AutoCAD SHX Text P2

AutoCAD SHX Text P4

AutoCAD SHX Text P1

AutoCAD SHX Text P3

AutoCAD SHX Text P1

AutoCAD SHX Text P3

AutoCAD SHX Text P1

AutoCAD SHX Text P3

AutoCAD SHX Text P1

AutoCAD SHX Text P3

AutoCAD SHX Text P1

AutoCAD SHX Text

SITE #20

AutoCAD SHX Text

SITE #22

AutoCAD SHX Text

SITE #24

AutoCAD SHX Text

SITE #63

AutoCAD SHX Text

SITE #49

AutoCAD SHX Text

SITE #51

AutoCAD SHX Text

SITE #53

AutoCAD SHX Text

SITE #56

AutoCAD SHX Text

SITE #58

AutoCAD SHX Text

SITE #60

AutoCAD SHX Text

SITE #61

AutoCAD SHX Text

SITE #62

AutoCAD SHX Text

SITE #64

AutoCAD SHX Text

SITE #65

AutoCAD SHX Text

SITE #66

AutoCAD SHX Text

SITE #67

AutoCAD SHX Text

SITE #69

AutoCAD SHX Text

SITE #71

AutoCAD SHX Text

SITE #73

AutoCAD SHX Text

SITE #75

AutoCAD SHX Text

SITE #77

AutoCAD SHX Text

SITE #79

AutoCAD SHX Text

SITE #81

AutoCAD SHX Text

SITE #82

AutoCAD SHX Text

FENCE

AutoCAD SHX Text

FENCE

AutoCAD SHX Text

FENCE

AutoCAD SHX Text

CONC

AutoCAD SHX Text

CONC

AutoCAD SHX Text

BIKE RACK

AutoCAD SHX Text

WOOD POST

AutoCAD SHX Text

CONC

AutoCAD SHX Text

CONC

AutoCAD SHX Text

WOOD FENCE

AutoCAD SHX Text

PROPANE TANK X2

AutoCAD SHX Text

EXPOSED 8" ROUND CULVERT

AutoCAD SHX Text

WOOD POSTS

AutoCAD SHX Text

WOOD POSTS

AutoCAD SHX Text

12" CULV

AutoCAD SHX Text

FAUCET ON CONC

AutoCAD SHX Text

CONC

AutoCAD SHX Text

B/BANK

AutoCAD SHX Text 50A

AutoCAD SHX Text

GARBAGE CANS

AutoCAD SHX Text

BLD

AutoCAD SHX Text

PATH

AutoCAD SHX Text

ASPH

AutoCAD SHX Text

T/BANK

AutoCAD SHX Text

B/BANK

AutoCAD SHX Text

T/BANK

AutoCAD SHX Text

SITE #7

AutoCAD SHX Text

SITE #9

AutoCAD SHX Text

SITE #1

AutoCAD SHX Text

SITE #2

AutoCAD SHX Text

SITE #4

AutoCAD SHX Text

SITE #5

AutoCAD SHX Text

SITE #11

AutoCAD SHX Text

SITE #13

AutoCAD SHX Text

SITE #15

AutoCAD SHX Text

SITE #16

AutoCAD SHX Text

SITE #17

AutoCAD SHX Text

SITE #8

AutoCAD SHX Text

SITE #10

AutoCAD SHX Text

SITE #6

AutoCAD SHX Text

SITE #12

AutoCAD SHX Text

SITE #14

AutoCAD SHX Text

SITE #59

AutoCAD SHX Text

SITE #57

AutoCAD SHX Text

SITE #55

AutoCAD SHX Text

SITE #18

AutoCAD SHX Text

SITE #24

AutoCAD SHX Text

SITE #26

AutoCAD SHX Text

SITE #30

AutoCAD SHX Text

SITE #31

AutoCAD SHX Text

SITE #33

AutoCAD SHX Text

SITE #34

AutoCAD SHX Text

SITE #68

AutoCAD SHX Text

SITE #70

AutoCAD SHX Text

SITE #72

AutoCAD SHX Text

SITE #74

AutoCAD SHX Text

SITE #76

AutoCAD SHX Text

SITE #28

AutoCAD SHX Text

SITE #23

AutoCAD SHX Text

SITE #25

AutoCAD SHX Text

SITE #27

AutoCAD SHX Text

SITE #29

AutoCAD SHX Text

SITE #32

AutoCAD SHX Text

SITE #36

AutoCAD SHX Text

SITE #38

AutoCAD SHX Text

SITE #40

AutoCAD SHX Text

SITE #37

AutoCAD SHX Text

SITE #39

AutoCAD SHX Text

SITE #47

AutoCAD SHX Text

SITE #41

AutoCAD SHX Text

SITE #80

AutoCAD SHX Text

SITE #78

AutoCAD SHX Text

SITE #42

AutoCAD SHX Text

SITE #43

AutoCAD SHX Text

AutoCAD SHX Text P2

AutoCAD SHX Text P4

AutoCAD SHX Text P2

AutoCAD SHX Text P4

AutoCAD SHX Text P1

AutoCAD SHX Text P3

AutoCAD SHX Text P1

AutoCAD SHX Text P3

AutoCAD SHX Text P1

AutoCAD SHX Text P3

AutoCAD SHX Text P1

AutoCAD SHX Text PROPOSED SERVICE RACK FOR ELECTRICAL METER, AND SERVICE ENTRANCE PANEL. SEE DETAIL 1 ON E-501 FOR PROPOSED ELEVATION.

AutoCAD SHX Text RE-FEED EXISTING TOILET SHOWER BUILDING WITHIN PROPOSED SERVICE PANEL UTILIZING EXISTING CONDUIT AND CONDUCTORS.

AutoCAD SHX Text P1

AutoCAD SHX Text UTILITY PROVIDED PAD AND TRANSFORMER. CONTRACTOR TO COORDINATE CONDUIT TERMINATIONS PER PAD SPECIFICATIONS BY UTILITY. CT CABINET & METER TO BE MOUNTED ON TRANSFORMER

AutoCAD SHX Text P3 http://www.ohm-advisors.com AutoCAD SHX Text GENERAL ELECTRICAL PLAN NOTES: 1. REFER TO CIVIL DRAWINGS FOR BELOW GRADE UTILITIES AND REFER TO CIVIL DRAWINGS FOR BELOW GRADE UTILITIES AND POTENTIAL INTERFACES 2. HAND DIG IN AREAS WHERE OTHER UTILITIES ARE PRESENT. HAND DIG IN AREAS WHERE OTHER UTILITIES ARE PRESENT. 3. ALL CONDUITS AND OR WIRING SHALL BE INSTALLED A MINIMUM OF ALL CONDUITS AND OR WIRING SHALL BE INSTALLED A MINIMUM OF 36" BELOW GRADE 4. INSTALL AND WIRE NEW SERVICE PEDESTALS IN ACCORDANCE WITH INSTALL AND WIRE NEW SERVICE PEDESTALS IN ACCORDANCE WITH THE MANUFACTURERS RECOMMENDATIONS AND INSTALLATION DETAILS. 5. ALL CONDUITS SHALL BE INSTALLED BY DIRECTIONAL DRILLING, ALL CONDUITS SHALL BE INSTALLED BY DIRECTIONAL DRILLING, UNLESS APPROVED BY ENGINEER AND/OR OWNER. INSTALL DIRECTIONAL BORE HDPE CONDUIT CONTINUOUS FOR EACH RUN AND CUT HDPE CONDUIT IN ORDER TO INSTALL SWEEPS INTO AND OUT OF PEDESTAL. FOR SHORT RUNS AND CONNECTION POINTS, OPEN CUT OR KNIFE TRENCHING WILL BE REVIEWED BY THE ENGINEER AND OWNER ON A LOCATION BY LOCATION BASIS. SEE UNDERGROUND CONDUIT AND PEDESTAL DETAILS 4, 5, AND 6 ON E-501. 6. ALL CURRENT CARRYING CONDUCTORS TO PEDESTALS TO BE ALL CURRENT CARRYING CONDUCTORS TO PEDESTALS TO BE INSULATED ALUMINUM. 7. COORDINATE SITE NUMBERING WITH CIVIL SITE PLAN C-130. COORDINATE SITE NUMBERING WITH CIVIL SITE PLAN C-130. 8. ALL ADA SITES TO HAVE CONCRETE PATHWAY FROM PEDESTAL TO ALL ADA SITES TO HAVE CONCRETE PATHWAY FROM PEDESTAL TO CAMPING PAD. REFER TO DETAIL 4 ON C-501. 9. CONTRACTOR TO INSTALL TEMPORARY ELECTRICAL CONNECTION FOR CONTRACTOR TO INSTALL TEMPORARY ELECTRICAL CONNECTION FOR GENERATOR AT EXISTING PUMP STATION. CONTRACTOR SHALL PROVIDE 120/240V, 1Ø, 36KW PORTABLE GENERATOR TO OPERATE PUMP STATION DURING DISRUPTION OF ELECTRICAL SERVICE.

AutoCAD SHX Text

ONE-LINE DIAGRAM2

SERVICE ENCLOSURE DETAIL - PP11

NOTE:

HAND HOLE DETAIL3

HANDHOLE SCHEDULE

10' MAX

DIRECTIONALLY DRILLED CONDUIT TO ELECTRICAL PEDESTAL DETAIL4

NOTE:

OPEN TRENCH DETAIL5

NOTE:

TO NEXT

PEDESTAL

FROM PREVIOUS

PEDESTAL

24"

CAUTION NOTE:

RIGID NON-METALIC CONDUCT

ELBOWS INSTALLED ON A LONG

CONDUIT RUN CAN BE DAMAGED

IN THE PROCESS OF PULLING

THE CONDUCTORS DUE TO THE

FRICTION AT THE BEND. USE

ABRASION RESISTANT PULL

TAPE WITH PROPER LUBRICANT

FOR LONGER RUNS.

6" MIN.

38"

COMPACTED

SOIL

GRADE

PEDESTAL DETAIL6

ALL ELECTRICAL

CONDUIT MUST

BE MINIMUM 36"

BELOW GRADE

HPDE INSTALLED WITH

DIRECTIONAL BORE

ALL CONDUITS TO BE

INSTALLED BY DIRECTIONAL

DRILLING, UNLESS OTHERWISE

APPROVED BY ENGINEER. CUT

HDPE CONDUIT IN ORDER TO

INSTALL SWEEPS INTO AND

OUT OF PEDESTALS.

U041CP6010 FOR POST-MOUNT POWER PEDESTAL,

U014CO10P FOR SURFACE-MOUNT POWER

PEDESTAL. PART NUMBER BASED ON MIDWEST

PRODUCTS

SPA

C E

GFI

U075CP6010 FOR POST-MOUNT POWER PEDESTAL,

U075CTL010 FOR SURFACE-MOUNT POWER

PEDESTAL. PART NUMBER BASED ON MIDWEST

PRODUCTS

SPA

C E

GFI

3050 20

P2, P4 POWER PEDESTALS

P1, P3 POWER PEDESTALS

Know what's below.

before you dig.Call

P :\7

Ta hq ua m en on

Fa lls

S ta te P ar k\

B 3_

P or ta ge C

G E le ct ric a nd S ite Im pr ov

\D ra w in gs \S ite \D et ai ls \E le ct

D et ai ls .d w g

J an

- 1 1:

D R

A W

P A

OHM-ADVISORS.COM

ARCHITECTS ENGINEERS PLANNERS

. A

D W

O F

N O

D, D

, O R

D W

R W

O F

J N

LIN

A N

D N

P O

G E

C A

M P

G R

O U

N D

P R

O V

E M

E N

E-501

-2 2-

1/2

/10 /27

3/1

1/1

4/0

1/1

E S

U N U

C I

R C

U M

S P

I C

S I

Q U

U L

A M

A R

T O

C H

N O

Y , M

A N

A G

T A

N D

B U

D G

F M

A D

A M

P . L

A C

H , R

A , D

A C

A D

O N

A N

D C

O N

U C

N D

AutoCAD SHX Text

ELECTRICAL DISTRIBUTION PANEL BOARD PP1

AutoCAD SHX Text

TO ELECTRICAL PEDESTAL CIRCUITS

AutoCAD SHX Text

EXISTING TOILET/SHOWER ELECTRICAL PANEL

AutoCAD SHX Text

UTILITY PROVIDED TRANSFORMER. CONTRACTOR TO COORDINATE WITH UTILITY

AutoCAD SHX Text

NEMA 4X 240V/120V 1200 AMP, 1ɸ, 3W

AutoCAD SHX Text

8' GROUND ROD

AutoCAD SHX Text

CONCRETE ENCASED REBAR

AutoCAD SHX Text

EXISTING WET WELL

AutoCAD SHX Text

NO SCALE

AutoCAD SHX Text

UTILITY

AutoCAD SHX Text

HANDHOLES

AutoCAD SHX Text

UTILITY PRIMARY ON UTILITY POLE NEAR CAMPSITE 67

AutoCAD SHX Text

NO SCALE

AutoCAD SHX Text

10" SONATUBE WITH4000 POUND AIR ENTRAINED CONCRETE

AutoCAD SHX Text

1 5/8" GALVANIZED UNISTRUT (TYP)

AutoCAD SHX Text

ATTACH UNISTRUT WITH PIPE CLAMP

AutoCAD SHX Text

8' GROUND ROD

AutoCAD SHX Text

8' GROUND ROD

AutoCAD SHX Text 4-#4 BAR VERT, #3 STIRRUPS HORIZ @ 12"oc

AutoCAD SHX Text

1. ALL CONDUIT ABOVE GRADE ATTACHED TO RACK, SHALL BE GALVANIZED RIGID. ALL CONDUIT ABOVE GRADE ATTACHED TO RACK, SHALL BE GALVANIZED RIGID. 2. BOND RACK STEEL AND REINFORCEMENT STEEL TO SYSTEM GROUND.BOND RACK STEEL AND REINFORCEMENT STEEL TO SYSTEM GROUND.

AutoCAD SHX Text

GRADE

AutoCAD SHX Text 42"

AutoCAD SHX Text 40"

AutoCAD SHX Text 6'-0"

AutoCAD SHX Text 10"

AutoCAD SHX Text

2" GALVANIZED PIPE TYP. EACH SIDEEACH SIDE

AutoCAD SHX Text

240/120V, 1200A, 1ɸ, NEMA 1ɸ, NEMA 4X PANEL BOARD (PP1)

AutoCAD SHX Text

CONDUITS FOR ELECTRICAL FEEDS AND BRANCH CIRCUITS.

AutoCAD SHX Text

CONDUIT FROM ELECTRICAL UTILITY TRANSFORMER

AutoCAD SHX Text 2'-6"

AutoCAD SHX Text

BOND GROUND TO UNISTRUT

AutoCAD SHX Text

BOND GROUND TO FOUNDATION REBAR

AutoCAD SHX Text 16"x8" CONCRETE BRICK

AutoCAD SHX Text

1" PVC CONDUIT FOR DRAINAGE

AutoCAD SHX Text

58" (TYPICAL) GROUNDROD (8' MIN. LENGTH)

AutoCAD SHX Text

6A BACKFILL WITH MINIMUM OF 5 INCH DEPTH

AutoCAD SHX Text

COVER TO BE FLUSH WITH FINISH GRADE

AutoCAD SHX Text

1. BOX AND COVER SHALL BE CONCRETE OR COMPOSITE. METAL COVER IS ACCEPTABLE. BOX AND COVER SHALL BE CONCRETE OR COMPOSITE. METAL COVER IS ACCEPTABLE. 2. COVERS SHALL BE SECURED WITH " BOLTS, NUTS, AND WASHERS. WHICH SHALL BE COVERS SHALL BE SECURED WITH " BOLTS, NUTS, AND WASHERS. WHICH SHALL BE 38" BOLTS, NUTS, AND WASHERS. WHICH SHALL BE BRASS, STAINLESS STEEL OR OTHER CORROSION RESISTANT MATERIAL. STAINLESS STEEL SHALL HAVE A CHROMIUM CONTENT OF NOT LESS THAN 18% AND A NICKEL CONTENT OF NOT LESS THAN 8%, NUTS SHALL BE RECESSED BELOW TOP SURFACE OF COVER. 3. COVER LETTERING SHALL BE "MINIMUM LETTERS CAST IN STANDARD MARKINGS: COVER LETTERING SHALL BE "MINIMUM LETTERS CAST IN STANDARD MARKINGS: 12"MINIMUM LETTERS CAST IN STANDARD MARKINGS: (ELECTRICAL). 4. CONDUIT ENTERING THE BOX SHALL HAVE 90 LONG RADIUS BEND (INSIDE THE BOX). CONDUIT ENTERING THE BOX SHALL HAVE 90° LONG RADIUS BEND (INSIDE THE BOX).THE CONDUITS OPENING, INSIDE THE BOX, SHALL BE AT LEAST 4" BELOW THE LID, OPENING SHALL HAVE SMOOTH EDGE. IF THE CONDUIT IS P.V.C OR HDPE. A SLIP COUPLING MUST BE USED. IF THE CONDUIT IS RIGID PIPE, A PROTECTIVE BUSHING SHALL BE USED. 5. CONDUCTORS SHALL HAVE A MINIMUM OF 24" SLACK FROM CONDUIT BELL END. CONDUCTORS SHALL HAVE A MINIMUM OF 24" SLACK FROM CONDUIT BELL END. 6. BACKFILL WITH EXCAVATED MATERIAL AND THOROUGHLY COMPACT. BACKFILL WITH EXCAVATED MATERIAL AND THOROUGHLY COMPACT. 7. WHERE PULLBOXES ARE INSTALLED IN CONCRETE AREAS, " PREMOLDED EXPANSION JOINT WHERE PULLBOXES ARE INSTALLED IN CONCRETE AREAS, " PREMOLDED EXPANSION JOINT 12" PREMOLDED EXPANSION JOINT SHALL BE INSTALLED AROUND THE BOX. 8. ANY HOLES DRILLED IN THE FIELD SHALL NOT EXCEED MORE THAN 25% OF THE AREA OF ANY HOLES DRILLED IN THE FIELD SHALL NOT EXCEED MORE THAN 25% OF THE AREA OF EACH SIDEWALL AND SHALL NOT BE NOT CUT INTO A STRUCTURAL REINFORCING RIB, CORNER, OR BOX LIP. 9. HANDHOLES TO BE RATED TIER 22 UNLESS OTHERWISE NOTED.HANDHOLES TO BE RATED TIER 22 UNLESS OTHERWISE NOTED.

AutoCAD SHX Text

GENERAL NOTES

AutoCAD SHX Text

ELECTRICAL

AutoCAD SHX Text

12 X 4" LIFTING SLOTS

AutoCAD SHX Text

NO SCALE

AutoCAD SHX Text

COVER

AutoCAD SHX Text "A"

AutoCAD SHX Text 24"

AutoCAD SHX Text 30 1/2"

AutoCAD SHX Text "B"

AutoCAD SHX Text "C"

AutoCAD SHX Text "D"

AutoCAD SHX Text

TYPE

AutoCAD SHX Text 17 1/2"

AutoCAD SHX Text "E"

AutoCAD SHX Text "F"

AutoCAD SHX Text

HH1

AutoCAD SHX Text 19 1/4"

AutoCAD SHX Text 32 1/4"

AutoCAD SHX Text

REMARKS

AutoCAD SHX Text 24"

AutoCAD SHX Text 47 5/8"

AutoCAD SHX Text 30 1/8"

AutoCAD SHX Text 36"

AutoCAD SHX Text

HH2

AutoCAD SHX Text 32 1/8"

AutoCAD SHX Text 49 5/8"

AutoCAD SHX Text

BOTTOM-FED CONDUIT SWEEPS AS APPROPRIATE FOR DEPTH OF HANDHOLE

AutoCAD SHX Text

ALL CONDUIT END BELLS SHALL BE INSTALLED BEFORE PULLING WIRE

AutoCAD SHX Text

REQUIRES BOTTOM FED

AutoCAD SHX Text

CONDUIT SWEEPS.

AutoCAD SHX Text 36"

AutoCAD SHX Text

REQUIRES BOTTOM FED

AutoCAD SHX Text

CONDUIT SWEEPS.

AutoCAD SHX Text

NEW ELECTRICAL RECEPTACLE PEDESTAL

AutoCAD SHX Text

NO SCALE

AutoCAD SHX Text

PROVIDE ELBOW

AutoCAD SHX Text

DIRECTIONALLY DRILLED CONDUIT

AutoCAD SHX Text AN OPEN TRENCH OF NO MORE THAN 10' SHALL BE ALLOWED FOR THE CONNECTION OF THE DIRECTIONALLY DRILLED CONDUIT TO THE ELECTRICAL RECEPTACLE PEDESTAL. SEE DETAIL #5 ON SHEET E-501 FOR OPEN TRENCH DETAIL

AutoCAD SHX Text

1. CONTRACTOR TO LIMIT THE NUMBER OF PEDESTALS, OUT OF DRILL LINE, TO 1CONTRACTOR TO LIMIT THE NUMBER OF PEDESTALS, OUT OF DRILL LINE, TO 1

AutoCAD SHX Text

HDPE CONDUIT

AutoCAD SHX Text

MECHANICALLY TAMPED BACKFILL (98% COMPACTION)

AutoCAD SHX Text 6" WIDE (MIN) RED VINYL MARKER TAPE TO RUN CONTINUOUS OVER CONDUIT. IT SHALL READ "CAUTION: ELECTRIC LINE BURIED BELOW."

AutoCAD SHX Text

PAVEMENT SECTION PER TYPICAL CIVIL DETAIL

AutoCAD SHX Text

EXISTING GRADE

AutoCAD SHX Text

LAWN AREA. GRADE TO MATCH EXISTING

AutoCAD SHX Text

12" MAX

AutoCAD SHX Text

FINISHED ASPHALT, GRADE TO MATCH EXISTING

AutoCAD SHX Text

SAWCUT (TYP.)

AutoCAD SHX Text 36"

AutoCAD SHX Text 18" (+/-)

AutoCAD SHX Text 6"

AutoCAD SHX Text

6" MINIMUM CLEAN SAND

AutoCAD SHX Text

6" MINIMUM CLEAN SAND

AutoCAD SHX Text 6"

AutoCAD SHX Text 18"

AutoCAD SHX Text 36"

AutoCAD SHX Text

12" MAX

AutoCAD SHX Text

CONDUCTORS

AutoCAD SHX Text

NO SCALE

AutoCAD SHX Text

1. CONTRACTOR TO LIMIT DISTURBANCE AREA/WIDTHCONTRACTOR TO LIMIT DISTURBANCE AREA/WIDTH

AutoCAD SHX Text

EXTEND CONDUIT INTO PEDESTAL POST A MINIMUM OF 2-INCHES ABOVE GRADE.

AutoCAD SHX Text REFLECTIVE 4 1/2" VINYL NUMBERS CORRESPONDING TO CAMPSITE BEING SERVED. FOR ALL BACK-IN CAMPSITES, MOUNT NUMBERS ON PEDESTAL POST BELOW SERVICE COVER DOOR. NUMBERS ARE TO BE VISIBLE FROM ROAD. PEDESTAL NUMBERING AND ORIENTATION SHALL BE APPROVED BY THE DNR FIELD REP. OR PARK MANAGER PRIOR TO INSTALLATION.

AutoCAD SHX Text

NO SCALE

AutoCAD SHX Text ALL PEDESTAL LOCATIONS AND ORIENTATION SHALL BE STAKED AND APPROVED BY THE DNR FIELD REP. OR PARK MANAGER PRIOR TO INSTALLATION. CONTRACTOR TO SUPPLY STAKES.

AutoCAD SHX Text

50A-2P CIRCUIT BREAKER.

AutoCAD SHX Text

30A-1P CIRCUIT BREAKER.

AutoCAD SHX Text

20A-1P CIRCUIT BREAKER.

AutoCAD SHX Text

20A-1P CIRCUIT BREAKER.

AutoCAD SHX Text

20A, 120V 5-20R GFCI RECEPTACLE

AutoCAD SHX Text

30A-1P CIRCUIT BREAKER.

AutoCAD SHX Text

50A, 240V BR-54U RECEPTACLE.

AutoCAD SHX Text

30A, 120V R-32U RECEPTACLE.

AutoCAD SHX Text

30A, 120V R-32U RECEPTACLE.

AutoCAD SHX Text

20A, 120V 5-20R GFCI RECEPTACLE

http://www.ohm-advisors.com AutoCAD SHX Text

AutoCAD SHX Text

File details come from the government source that posted it. Updated Mar 12, 2026.