1.04a Redacted Sole Source Justification_Redacted.pdf

Source Selection Information – See FAR 2.101 and 3.104

The invoked drawings for the Honeycomb category, require extensive testing required by the NA

Type Drawing and process controls including: Materials, procedures and equipment shall be proven by testing in accordance with SAE-AMS-STD-401 (which supersedes MIL- STD-401) to meet or exceed the minimum properties stated in Notes 2 and 3 of drawing 804- 4623540 revision A. In addition, Joiner Doors shall also be tested in accordance with Notes 3, 4 and 5 of drawing 805-4629248. This testing requires at a minimum 60 days to complete. Presently, Advanced Structures Corporation is the only known company who has satisfied this testing requirement and is capable of providing the required items in accordance with the drawing and testing standards. No other vendors have invested in or attempted to achieve or submit test results for qualification. The requirements are required by NA Drawings and must be met prior to receiving the associated items for ship installation to be compatible to the form, fit and function of the ships configuration. Additionally, the panels must be a close fit to the coamings and trim pieces, and the finishes for all items must match because these are Habitability area items. Advanced Structures

Corporation is the only known vendor qualified to fulfill this order.

Document number:

I CERTIFY THAT THE INFORMATION PROVIDED ABOVE IS COMPLETE AND ACCURATE TO THE BEST OF

MY KNOWLEDGE. I UNDERSTAND THAT THE PROCESSING OF THIS SOLE SOURCE JUSTIFICATION

PRECLUDES THE USE OF FULL AND OPEN COMPETITION.