MIL-STD-2073.pdf
Military Standard PDF 11 MB Posted
- Solicitation number
- 70ZU0127QCV008
- Issued by
- Not on record
About this file
This document is an informational guide for packaging and marking requirements applicable to Department of Defense contracts and solicitations, issued by the Defense Contract Management Agency in March 2014.
The guide provides comprehensive instruction on military packaging standards and practices, covering five basic preservation methods (Method 10 through Method 50) that range from physical protection only to watervaporproof protection with desiccant. Key specifications include MIL-STD-2073-1E for military packaging, MIL-STD-129 for military marking of shipments and storage, ASTM D3951 for commercial packaging, and MIL-DTL-117 for heat-sealable bags. The document addresses hazardous materials packaging requirements under Title 49 CFR for land transport, IMO/IMDG for water transport, ICAO/IATA for commercial air, and AFMAN 24-204_IP for military air transport. Military packaging applies to items deployed during wartime, those requiring reusable containers, items intended for delivery-at-sea, and items entering the Defense Transportation and Distribution System with storage exceeding six months. The guide includes detailed illustrations of packing methods, labeling examples for unit and intermediate containers with both linear and 2D barcode options, exterior container marking requirements, Military Shipping Labels (MSL) for address markings, special markings such as shelf-life and project codes, and packaging requirement codes referenced in MIL-STD-20731E(1). Quality assurance provisions require visual preservation examinations, leakage tests, and heat-sealed seam testing. Additional topics covered include palletization standards (MIL-STD-147), heat-treated wood packaging material requirements, Radio Frequency Identification (RFID) tag specifications, and references to relevant websites and key specifications for contractors to consult.
View the file
Other versions and copies of MIL-STD-2073
| File | Revision | Posted | Attached to |
|---|---|---|---|
| MIL-STD-2073.pdf Same revision and size as this file | Revision not stated | CONTROL-INDICATOR | |
| MIL-STD-2073.pdf Same revision and size as this file | Revision not stated | STRAINER SEDIMENT | |
| MIL-STD-2073.pdf Same revision and size as this file | Revision not stated | PUMP UNIT, CENTRIFUGAL | |
| MIL-STD-2073.pdf Same revision and size as this file | Revision not stated | CONTROLLER, MOTOR | |
| MIL-STD-2073.pdf Same revision and size as this file | Revision not stated | PASSAGE WAY FAN, EXHAUST | |
| MIL-STD-2073.pdf | Revision not stated | STRAINER SEDIMENT | |
| MIL-STD-2073.pdf Same revision and size as this file | Revision not stated | GASKETS | |
| Mil-Std 2073.pdf | Revision not stated | COUPLING, FLEX, CONE RING | |
| Mil-Std 2073.pdf | Revision not stated | STRAINER, SEDIMENT | |
| MIL-STD-2073.pdf Same revision and size as this file | Revision not stated | PUMP UNIT, CENTER WITH MOTOR | |
| Mil-Std 2073.pdf | Revision not stated | ODMS AIR CLEANER | |
| MIL-STD-2073.pdf Same revision and size as this file | Revision not stated | GASKETS | |
| MIL-STD-2073.pdf | Revision not stated | Single Leg Wire Rope Assembly | |
| MIL-STD-2073.pdf Same revision and size as this file | Revision not stated | TUBE, METALLIC | |
| MIL-STD-2073.pdf | Revision not stated | FILTER ELEMENT FLUID | |
| MIL-STD-2073.pdf | Revision not stated | EXHAUST FASTENER KIT | |
| MIL-STD-2073.pdf Same revision and size as this file | Revision not stated | ANODE SUPPORT | |
| MIL-STD-2073.pdf | Revision not stated | STRAINER, SEDIMENT | |
| MIL-STD-2073.pdf Same revision and size as this file | Revision not stated | GASKETS | |
| MIL-STD-2073.pdf Same revision and size as this file | Revision not stated | CONTROL MONITOR |
Show all 20
Who attaches MIL-STD-2073
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
File details come from the government source that posted it. Updated .