Michell Bearing Inspect and Service SOW.docx
DOCX document 45 KB Posted
- Attached to
- USCGC MIDGETT LINE SHAFT BEARING INSPECTION
- Solicitation number
- 70Z08526Q0000299
About this file
This document is a Statement of Work (SOW) for line shaft bearing inspection and service for the United States Coast Guard Cutter (USCGC) MIDGETT. The SOW requires an original equipment manufacturer (OEM) certified technical representative from Michell Bearings to inspect the starboard forward and aft line shaft bearings, make necessary adjustments, and replace seals using government-furnished equipment. The work will be conducted in Honolulu, Hawaii, with a performance period from December 1-5, 2025.
The related federal contract opportunity indicates this is a sole-source procurement under FAR Part 12 and 13 procedures, specifically targeting Michell Bearings Limited from the United Kingdom. The contract is classified under NAICS code 336611 (Ship Building and Repairing) with a Product Service Code of J020, and will not be set aside for small businesses. The procurement is being conducted by the Department of Homeland Security's United States Coast Guard Surface Forces Logistics Center, with the intent to award a firm-fixed-price contract directly to Michell Bearings for specialized shaft bearing inspection services.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| NOTICE OF INTENT TO SOLE SOURCE 70Z08526Q0000299.docx | DOCX document |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
PR #: 52000PR260000299
STATEMENT OF WORK
STATEMENT OF WORK (SOW)
FOR
LINE SHAFT BEARING INSPECTION AND SERVICE
CGC MIDGETT found their starboard line shaft bearings (LSBs) to be leaking oil. The crew replaced the seals, but it did not stop the leak. An OEM technical representative is required on-site to address the issue.
1. REFERENCES
Coast Guard Drawings Coast Guard Drawing 750-WMSL-243-007, Rev E, Propulsion Shafting System Arrangement (ASC243008) Coast Guard Publications Coast Guard Technical Publication (TP) 7072, SWBS 245, Feb 2022, Controllable Pitch Propeller (CPP) - Installation Manual Surface Forces Logistics Center Standard Specification 0000 (SFLC Std Spec 0000), 2022, General Requirements Surface Forces Logistics Center Standard Specification 6310 (SFLC Std Spec 6310), 2022, Requirements for Preservation of Ship Structures Other References Michell Bearing Dwg NB/1/218897 Special NPL4 Plummer Bearing Flange Mounted
2. REQUIREMENTS
The contractor shall provide an OEM certified technical representative to inspect the starboard forward and aft LSBs, make necessary adjustments and replace the seals using Government Furnished Equipment (GFE) if necessary.
Operational test – Initial. Prior to commencement of work, the Contractor must witness Coast Guard personnel perform an initial operational test of the equipment. Submit a CFR.
Operational test-post repair. After completion of work, the Contractor must witness Coast Guard personnel test all items or shipboard devices that have been disturbed, used, repaired, altered, or installed to demonstrate satisfactory condition. Submit a CFR.
OEM contact information:
| Michell Bearings |
| Anthony.Kirkland@MichellBearings.com |
| +44 (0) 191 273 0291 |
The work will be conducted at the following address:
CGC MIDGETT
400 Sand Island Parkway
HONOLULU HI 96819
Period of Performance:
01DEC25 to 05DEC25
Please contact LT Parker Brunkala at (510) 460-8189 or parker.t.brunkala@uscg.mil with questions regarding this SOW.
LAST UPDATED: 011/04/2025 PAGE 1/6
File details come from the government source that posted it. Updated .