Amendment -0002- final.pdf

Offers must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended, by one of the following methods:

(a) By completing items 8 and 15, and returning or (c) By separate letter or electronic communication which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted, such change may be made by letter or electronic communication, provided each letter or electronic communication makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

E. IMPORTANT: Contractor is not is required to sign this document and return copies to the issuing office.

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT 1. CONTRACT ID CODE

2. AMENDMENT/MODIFICATION NUMBER 3. EFFECTIVE DATE 4. REQUISITION/PURCHASE REQUISITION NUMBER 5. PROJECT NUMBER (If applicable)

7. ADMINISTERED BY (If other than Item 6) CODE

STANDARD FORM 30 (REV. 11/2016)

Prescribed by GSA FAR (48 CFR) 53.243

FACILITY CODE

9A. AMENDMENT OF SOLICITATION NUMBER

9B. DATED (SEE ITEM 11)

10A. MODIFICATION OF CONTRACT/ORDER NUMBER

10B. DATED (SEE ITEM 13)

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

The above numbered solicitation is amended as set forth in Item 14. The hour and date specified for receipt of Offers is extended. is not extended.

12. ACCOUNTING AND APPROPRIATION DATA (If required) copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted;

13. THIS ITEM APPLIES ONLY TO MODIFICATIONS OF CONTRACTS/ORDERS.

IT MODIFIES THE CONTRACT/ORDER NUMBER AS DESCRIBED IN ITEM 14.

CHECK ONE A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE CONTRACT ORDER

NUMBER IN ITEM 10A.

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, appropriation data, etc.) SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103(b).

C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

D. OTHER (Specify type of modification and authority)

Except as provided herein, all terms and conditions of the document referenced in Item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

15C. DATE SIGNED

15A. NAME AND TITLE OF SIGNER (Type or print)

16C. DATE SIGNED

16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

PAGE OF PAGES

6. ISSUED BY CODE

8. NAME AND ADDRESS OF CONTRACTOR (Number, street, county, State and ZIP Code) (X)

CODE

15B. CONTRACTOR/OFFEROR

(Signature of person authorized to sign)

16B. UNITED STATES OF AMERICA

(Signature of Contracting Officer)

Previous edition unusable

70Z08520RP4505200

USCGC MUNRO ( WMSL 755 ) DOCKSIDE REPAIRS FY20

Amendment No. 0002

The purpose of this amendment is to:

1. Reply to the following Requests for Clarification:

QUESTION 1: Definite item No: D-08, Carriage and Centerline Winch, Inspection and Test.

Paragraph 3.4.2 states “Remove corrosion from pipe rail and square rail and preserve only the square rail using one coat of epoxy primer and a top coat of PPG Polysiloxane 700 (PSX 700) as described in SFLC Std Spec 6310. Final coat shall be white.” Is this a SP-10 blast and coat, or an SP- 11, power tool clean?

RESPONSE TO QUESTION 1:

Paragraphs 3.4.2 and 3.10.2 for work item D-08 are revised as follows:

Prior to surface preparation and preservation, for both the pipe rails and square rails, conduct an SSPC SP-1 (Solvent Cleaning).

Preserve Pipe Rail IAW SFLC Std Spec 6310, Appendix A-5, FREEBOARD/SUPERSTRUCTURE/MAST, Freeboard/ Superstructure, Aluminum, Unpainted. If an alternate procedure to remove all visible corrosion from the pipe rail is desired, the procedure can be proposed to the Coast Guard Inspector prior to starting corrosion removal. Following verification by the Coast Guard Inspector, that procedure may be authorized.

Preserve Square Rail IAW SFLC Std Spec 6310, Appendix A-4, FREEBOARD/SUPERSTRUCTURE/MAST, Freeboard/ Superstructure, Steel, Option III with the following acceptable deviations: Surface preparation may be accomplished by SSPC SP-11 (Power Tool Cleaning to Bare Metal), and a Coating System of 1) Epoxy Primer/Mid-Coat - Polysiloxane Sys, 2) Polysiloxane may be acceptable. The final top coat shall be white

This revision will be incorporated into ATTACHMENT 1, Specifications, at time of award.

SEE PAGES 2 FOR DESCRIPTION

Surface Forces Logistics Center 1301 Clay Street, Suite 800N Oakland CA 94612