Amendment -0001 -final.pdf

Offers must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended, by one of the following methods:

(a) By completing items 8 and 15, and returning or (c) By separate letter or electronic communication which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted, such change may be made by letter or electronic communication, provided each letter or electronic communication makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

E. IMPORTANT: Contractor is not is required to sign this document and return copies to the issuing office.

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT 1. CONTRACT ID CODE

2. AMENDMENT/MODIFICATION NUMBER 3. EFFECTIVE DATE 4. REQUISITION/PURCHASE REQUISITION NUMBER 5. PROJECT NUMBER (If applicable)

7. ADMINISTERED BY (If other than Item 6) CODE

STANDARD FORM 30 (REV. 11/2016)

Prescribed by GSA FAR (48 CFR) 53.243

FACILITY CODE

9A. AMENDMENT OF SOLICITATION NUMBER

9B. DATED (SEE ITEM 11)

10A. MODIFICATION OF CONTRACT/ORDER NUMBER

10B. DATED (SEE ITEM 13)

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

The above numbered solicitation is amended as set forth in Item 14. The hour and date specified for receipt of Offers is extended. is not extended.

12. ACCOUNTING AND APPROPRIATION DATA (If required) copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted;

13. THIS ITEM APPLIES ONLY TO MODIFICATIONS OF CONTRACTS/ORDERS.

IT MODIFIES THE CONTRACT/ORDER NUMBER AS DESCRIBED IN ITEM 14.

CHECK ONE A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE CONTRACT ORDER

NUMBER IN ITEM 10A.

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, appropriation data, etc.) SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103(b).

C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

D. OTHER (Specify type of modification and authority)

Except as provided herein, all terms and conditions of the document referenced in Item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

15C. DATE SIGNED

15A. NAME AND TITLE OF SIGNER (Type or print)

16C. DATE SIGNED

16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

PAGE OF PAGES

6. ISSUED BY CODE

8. NAME AND ADDRESS OF CONTRACTOR (Number, street, county, State and ZIP Code) (X)

CODE

15B. CONTRACTOR/OFFEROR

(Signature of person authorized to sign)

16B. UNITED STATES OF AMERICA

(Signature of Contracting Officer)

Previous edition unusable

70Z08520RP4505200

USCGC MUNRO ( WMSL 755 ) DOCKSIDE REPAIRS FY20

Amendment No. 0001

The purpose of this amendment is to:

1. To extend the Requests for Clarifications end date from February 5, 2020 to February 11, 2020 at

12:00 p.m., Pacific time.

2. To extend the solicitation closing date from February 12, 2020, 2:00 p.m. to February 14, 2020 at 2:00 p.m., Pacific time.

3. To remove Attachment 8 and replace it with the following Requests for Clarification:

QUESTION 1: Definite item No: D‐06, Helo Hangar Door, Inspect, Test and Repair, Paragraph 3.3, Table 1 ‐ Hand Crank Assy ‐ (Renew cable engaging manual hand crank on STBD Side). Is the material for this repair task GFM? If not, we will need the part number for the material so that we can include the repair material in our quote?

RESPONSE TO QUESTION 1:

No GFM will be provided.

Repairs to the Hand Crank Assembly and associated cables are anticipated and materials needed, if necessary, will be based upon the contractor’s repair recommendation following inspection and testing.

QUESTION 2: Definite item No: D‐06, Helo Hangar Door, Inspect, Test and Repair, Paragraph 3.3, Table 1 ‐ Barrel Assembly (Securely fasten all loose hardware and repair damage to Hood Assembly). Is the material for this repair task GFM? If not, we will need the part number for the material so that we can include the repair material in our quote?

RESPONSE TO QUESTION 2:

No GFM will be provided.

Repairs to the Hood Assembly are anticipated and materials needed, if necessary, will be based upon the contractor’s repair recommendation following inspection and testing.

QUESTION 3: Definite item No: D‐06, Helo Hangar Door, Inspect, Test and Repair, Paragraph 3.3, Table

1 ‐ Weather Seal (Renew Seal). Is the material for this repair task GFM? If not, we will need the part number for the material so that we can include the repair material in our quote?

70Z08520RP4505200

USCGC MUNRO ( WMSL 755 ) DOCKSIDE REPAIRS FY20

Amendment No. 0001

RESPONSE TO QUESTION 3:

No GFM will be provided.

All materials for this repair task are contractor‐furnished.

Renew Seal (P/N: HH0280) for the Left Hand Guide Rail Assembly (HH3031) and Right Hand Guide Rail Assembly (HH3032) for both doors.

SEE PAGES 2-3 FOR DESCRIPTION

Surface Forces Logistics Center 1301 Clay Street, Suite 800N Oakland CA 94612