Amendment_0003.pdf

1. CONTRACT ID CODE PAGE OF PAGES

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT 1 2

2. AMENDMENT/MODIFICATION NO. 3. EFFECTIVE DATE 4. REQUISITION/PURCHASE REQ. NO. 5. PROJECT NO. (If applicable)

0003 8/24//18

6. ISSUED BY CODE HSCG85 7. ADMINISTERED BY (If other than Item 6) CODE

USCG COMMAND

Surface Forces Logistics Centers, C&PD2-LREPL 1301 Clay Street, Suite 800N, Oakland, CA 94612

SAME AS BLOCK #6

8. NAME AND ADRESS OF CONTRACTOR (no., street, county, State and ZIP Code) 9.A AMENDMENT OF SOLICITATION NO.

70Z08519RP4500900

9B. DATE (SEE ITEM 11)

8/15/2018

10A. MODIFICATION OF CONTRACT/ORDER

NO. ?

10B. DATED (SEE ITEM 13)

CODE FACILITY CODE

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

The above numbered solicitation is amended as set forth in Item 14. The hour and date specified for receipt of Offers is extended, is not extended. Offers must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended, by one of the following methods: (a) By completing Items 8 and 15, and returning 1 copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the Offer submitted: or (c) By separate letter or telegram which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEGEMENT TO BE RECEIVED AT THE PLACE DESIGNATED FOR THE

RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted, such change may be made by telegram or letter, provided each telegram or letter makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

12. ACCOUNTING AND APPROPRIATION DATA (If required)

13. THIS ITEM APPLIES ONLY TO MODIFICATIONS OF CONTRACTS/ORDERS,

IT MODIFIES THE CONTRACT/ORDER NO. AS DESCRIBED IN ITEM 14.

A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE CONTRACT/.ORDER NO. IN ITEM 10A.

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, appropriation data, etc)

SET FORTH IN ITEM 14, PURSUANT TO AUTHORITY OF FAR 43.103(b).

C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

D. OTHER (Specify type of modification and authority).

E. IMPORTANT: Contractor is not, is required to sign this document and return 1 copies to the issuing office.

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

SUBJECT: RFP No. 70Z08519RP4500900 USCGC STRATTON, Dockside Repairs FQ1 FY19

Offer due date remains unchanged at 9 AM Pacific September 10, 2018

See page 2

Except as provided herein, all terms and conditions of the document referenced in Item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

15A. NAME AND TITLE OF SIGNER (Type or print) 16A NAME AND TITLE OF CONTRACTING OFFICER (Type or print)

15B. CONTRACTOR/OFFEROR 15C. DATE SIGNED 16B. UNITED STATES OF AMERICA 16C. DATE SIGNED

BY

(Signature of person authorized to sign) (Signature of Contracting Officer)

NSN 7540-01-152-8070 30-105 STANDARD FORM 30 (REV. 10-83)PREVIOUS

EDITION UNUSABLE Prescribed by GSA, FAR (48 CFR) 53.243

Amendment 0003 Solicitation 70Z08519RP45009

STRATTON DS Q1 2019

QUESTION 1: WI -006. Surfaces Preservation, then see Paragraph 3.4: “Shall Repair” is not enough information to quote, Need Quantity of Pin Holes, assuming the 60% will be clad welded not Epoxy, what are the hotwork interferences below deck?

Need Sq Footage of Epoxy Fairing and Fairing Material (Belzona)?

ANSWER 1: WI-6 specifies/requires the Contractor to conduct 3.3 Inspection, then submit Conditions found report (CFR).

So, the Contractor will know and include what types of defects, how to repair, and repair areas.

For bidding purposes use: 2 Lots of Epoxy Repairs (2 of 1 Belzona Kit plus Labor 8 hours/Kit). Additionally, the Contractors are encouraged to check the ship or sister ship so he can see the interferences.

QUESTION 2: WI 10 Deck Covering then see Paragraph 3.4 “Shall Repair” is not enough information to quote, Need Quantity of Pin Holes, assuming the 60% will be clad welded not Epoxy, what are the hotwork interferences below deck?

Need Sq Footage of Epoxy Fairing and Fairing Material (Belzona)?

Contractor recommends repairs be subject of CFR/CR.

ANSWER 2: for WI-10 the answer is the same as given for Question 1: Contractor to conduct 3.3 Inspection, then submit CFR.

For bidding purposes use: 1 Lot of Epoxy Repair (1 of 1 Belzona Kit plus Labor 8 hours/Kit). Additionally, the Contractors are encouraged to check the ship or sister ship so he can see the interferences.

QUESTION 3: WI 011 Components and Outfits (Superstructure) Preserve: then see Para. 3.4.2, clarification to insure the surface preparation requirement. Does the Coast Guard Inspector designate or determine the surface preparation requirement or does the contractor choose? The first bullet indicates Option 1 surface preparation. The second bullet indicates SSPC SP-11 surface preparation. There is a huge difference. The issue is sandblasting or water jetting vice SSPC SP-11 power tool cleaning?

Contractor recommends utilizing the Polysiloxane System, as per Option III coating system.

ANSWER 3: WI-11, Para. 3.4.2 specifies/requires “Freeboard/Superstructure/Mast (Freeboard/Superstructure, Steel), Option I” for Paints/Coatings as listed in Table 1.

SSPC-SP10 (or SSPC-SP10 (WAB)) shall be applied for general or large surface areas according to SFLC Std Spec 6310.

Then, “Power Tool Cleaning to Bare Metal (SSPC-SP 11) or equivalent” is additionally repeated and emphasized for all “coating defects or limited access areas”.

QUESTION 4: W-001 Tanks MP Fuel Clean and Inspect: then see Ppara 3.1.4.3, This is a “Refuel Topic” not a normal paragraph for tank cleaning?

3.1.4.3 Provide the following to support Coast Guard personnel to refuel equipment:

• boom around cutter

• tagout crane way equipment

• Oil transfer supervisor

ANSWER 4: WI-1: Agreed this paragraph is unclear, incomplete. So, Paragraph 3.1.4.3, is not required and is deleted from the

Attachment 1 Specification.