CCSR001_reference_7368B_311_A.PDF

TP: 7368B

HULL, MECHANICAL

& ELECTRICAL

TECHNICAL PUBLICATION

SHIP SERVICE DIESEL

GENERATOR (SSDG) – MODEL 3512B

– PARTS MANUAL (SEBP4026-22)

418’ WMSL CLASS CUTTERS

DISTRIBUTION STATEMENT D. – Distribution authorized to Department of Homeland Security, DoD and their contractors for Administrative/Operational purpose only, determined 07 November 2017. Other requests for this document shall be referred to Commander, USCG Surface Forces Logistics Center (SFLC), Engineering Services Division (ESD), Technical Information Management Branch (TIMB), M/S 25, 2401 Hawkins Point Road, Baltimore, MD 21226.

WARNING – This document contains technical data whose export is restricted by the Arms Export Control Act (Title 22, U.S.C., Sec 2751, et seq.) or the Export Administration Act of 1979, as amended, Title 50, U.S.C., App. 2401 et seq. Violations of these export laws are subject to severe criminal penalties. Disseminate in accordance with provisions of DoD Directive 5230.25.

DESTRUCTION NOTICE. - For unclassified, limited documents, destroy by any method that will prevent disclosure of contents or reconstruction of the document.

PUBLISHED UNDER AUTHORITY OF THE U.S. COAST GUARD

SWBS 311 DATE: 07 November 2017

Department of Homeland Security

UNITED STATES

COAST GUARD

United States Coast Guard Surface Forces Logistics Center

2401 Hawkins Point Road Baltimore, MD 21226 Phone: (410) 582-4725 Fax: (410) 762-6898

07 NOV 2017

MEMORANDUM

From: Mitch Frid, Branch Chief

SFLC-ESD-TIMB

Reply to Attn of:

SFLC-ESD-TIMB-PPDS

R. Infantino

To: Distribution

Subj: Coast Guard Technical Publication 7368B

Ref: (a) SFLC Central Activity 24713, dated 10 OCT 2017

(b) Authorization Document: HSCG23-13-C-ADB014

1. PURPOSE. IAW ref (a) and (b), this memorandum promulgates Technical Publication 7368B for the Ship Service Diesel Generator (SSDG) – Model 3512B – Parts Manual (SEBP4026-22) onboard the 418’ WMSL Class Cutters.

2. PUBLICATIONS AFFECTED. Technical Publication 7368B Technical Publication 7368A

3. ACTION. Technical Publication 7368B is available in the Coast Guard Logistics Information Management System – Surface Technical Information Portal (CGLIMS-STIP) data repository and is ready for viewing. If you require a hardcopy and are unable to print the document yourself, please order using the Document Ordering System within CGLIMS-STIP. Technical Publication 7368A is obsolete and should be removed in accordance with standard procedures.

4. DISTRIBUTION. No paper distribution of this technical publication will be provided. An electronic master copy is maintained by SFLC-ESD-TIMB and is located in CGLIMS-STIP at http://oscls-lims-ap04.osc.uscg.mil:

7002/NETIMS/. Annual distribution of all technical data will be distributed via DVD format to each associated unit; the Distribution Schedule is located under the View tab in CGLIMS-STIP. Additional DVDs and hard copies can be ordered via CGLIMS-STIP using the Document Ordering System.

5. REQUEST FOR CHANGES. The technical publication includes a Technical Manual Deficiency/Evaluation Report which links to the CG-22 process. Please use this form to report any discrepancies to the Product Line. All approved changes will be provided by the Product Line for inclusion in the technical publication.

6. REQUEST FOR FEEDBACK. The Surface Forces Logistics Center is very interested in your thoughts regarding this technical information package. Please take a few moments, using the link to the Customer Survey Form below, to let us know your thoughts. Every survey will be reviewed with the intention of making our products and services a valuable resource for your future use.

SFLC Customer Survey and Suggestion Form

FRID.MITCHELL.1043294772

Digitally signed by FRID.MITCHELL.1043294772 DN: c=US, o=U.S. Government, ou=DoD, ou=PKI, ou=USCG, cn=FRID.MITCHELL.1043294772 Reason: I am approving this document Date: 2017.11.07 06:23:54 -05'00' http://oscls-lims-ap04.osc.uscg.mil:7002/NETIMS/ http://oscls-lims-ap04.osc.uscg.mil:7002/NETIMS/ https://sflccentral.uscg.mil/ssf/a/do?p_name=ss_forum&p_action=1&entryType=8aa6c087485af90c01485b00ef233c71&binderId=130&action=add_folder_entry&novl_url=1

TECHNICAL MANUAL

DEFICIENCY / EVALUATION

REPORT

ANY DEFICIENCIES DETECTED

WITHIN THIS PUBLICATION SHOULD

BE REPORTED BY SUBMITTING A

CG-22 Maintenance/Publication Feedback.

http://sflccentral.uscg.mil/ssf/a/do?

p_name=ss_forum&p_action=1&entryType=8aa6c087485af90c01485b00ef233c71&binderId=130&action=add_folder_entry&vibeonprem_url=1

Maintenance/Publication Feedback (CG-22) Process Guide https://cg.portal.uscg.mil/units/sflc/SFLCDirectivesLibrary/CGTO_PG-85-00-20-S.pdf

IN THE EVENT OF LOSS IN CONNECTIVITY, CALL SFLC-ESD-TIMB (410-582-4725)

https://cg.portal.uscg.mil/units/sflc/SFLCDirectivesLibrary/CGTO_PG-85-00-20-S.pdf https://sflccentral.uscg.mil/ssf/a/do?p_name=ss_forum&p_action=1&entryType=8aa6c087485af90c01485b00da8a3c53&binderId=116&action=add_folder_entry&vibeonprem_url=1

RECORD OF CHANGES

TP NO. ______

DATE AMEND. NO. NAME SIGNATURE EFFECTIVE DATE

Individual Manual Application Sheet

Technical Publications Number

7368B

SWBS Number 311

SWBS Element Title

SHIP SERVICE POWER GENERATION

Section Identifier A

Equipment Functional Description

SHIP SERVICE DIESEL GENERATOR (SSDG)

– MODEL 3512B – PARTS MANUAL

(SEBP4026-22)

Remarks

Section Applicability

Asset Subclass Hulls Notes

418-WMSL 418A-WMSL 750, 751, 752, 753, 754, 755 750-WMSL

SAFETY.CAT.COM

Parts Manual 3512B Marine Engine Military NSC1-UP (Generator Set)

SEBP4026-22 (en-us) September 2017

COPYRIGHT LICENSE

This Agreement is made between Northrop Grumman Ship Systems, Pascagoula, MS ("Licensee"), and Caterpillar Inc. ("Caterpillar") on February 7th, 2006.

RECITALS

A. Licensee wishes to reproduce and distribute certain Caterpillar publications protected by and subject to copyright (the "Copyrighted Materials"). Copyrighted Materials comprise the items listed in Exhibit A (attached hereto as part of this Agreement), and provided to Licensee by Caterpillar in electronic form.

B. Licensee intends to distribute the Copyrighted Materials, or portions thereof, internally for its own Caterpillar related business purposes and to its customers for the relevant Caterpillar products as described in Exhibit A.

AGREEMENT

1. Consent and License to copy and distribute the Copyrighted Materials

Caterpillar, to the extent of its rights in the Copyrighteci Mat~rials and subject to Section 2 below, grants to Licensee· a royalty-free, non-exclusive, license to copy and distribute,. using any media, the Copyrighted Materials

2. Covenants by Licensee

Licensee covenants that it will only make and distribute copies of the Copyrighted Materials, as reasonably necessary to support its Caterpillar related business purposes and for its customers for the relevant Caterpillar products as specified in the attached Exhibit A and that it will not sub license to any third party any of the rights licensed to it herein.

3. Authority to Sign

The persons signing this License warrant that they each have the authority to bind their principal to the terms and conditions set forth herein.

4. Indemnification

Licensee shall indemnify, defend, and hold harmless Caterpillar, its affiliates, directors, officers, employees and agents from and against any and all suits, claims, demands, losses, damages, costs and expenses of any nature whatsoever, including without limitation, litigation expenses, attorneys' fees and liabilities incurred in connection therewith, arising out of Licensee's distribution of the Copyrighted Materials.

Copyright License Page I of2

5. Miscellaneous

The effective date of this Agreement is the date noted above, with its term continuing indefinitely until terminated. Caterpillar may, in its sole discretion and at any time, terminate this Agreement by delivering written notice referencing this Agreement of same to Licensee. This Agreement shall not be assigned or transferred in any way by Licensee, voluntarily or involuntarily, by operation of law or otherwise, without the prior written consent of Caterpillar referencing this Agreement. Nevertheless, Licensee may assign this Agreement to any successor entity pursuant to the sale of all the stock or assets of Licensee's business or a merger in which Licensee is not the surviving entity provided, however, that the purchaser or successor entity is not a competitor or potential competitor of Caterpillar and that Licensee give written notice to Caterpillar of such assignment.

This Agreement shall be governed by and construed in accordance with the laws of Illinois, USA, excluding rules regarding the conflict of laws.

Caterpillar Inc.

By:~ Name~:~E=m=m=y.1---=C~·~W'~n~·g=h=t~~~~ Title: Parts & Service Supportability

Department Manager

Copyright License Page 2 of2

Licensee: Northrop Grumman Ship Systems

Name: Albert A. Billiot III Title: Technical Publications Lead/DW'

Date: 7 February 2006

Product and Dealer Information Note: For product identification plate locations, see the section “Product Identification Information” in the Operation and Maintenance Manual.

Delivery Date:

Product Information Model:

Product Identification Number:

Engine Serial Number:

Transmission Serial Number:

Generator Serial Number:

Attachment Serial Numbers:

Attachment Information:

Customer Equipment Number:

Dealer Equipment Number:

Dealer Information Name: Branch:

Address:

Dealer Contact Phone Number Hours

Sales:

Parts:

Service:

MEMORANDA

MEMORANDA SEBP4026-22

SEBP4026-22 TABLE OF CONTENTS A1

GENERAL INFORMATION. . . . . . . . . . . . . . . . . . . . . . . A3

REPAIR ALTERNATIVES. . . . . . . . . . . . . . . . . . . . . . . . A5

SUPPLEMENTAL COOLANT

ADDITIVES. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A6

MAINTENANCE PARTS . . . . . . . . . . . . . . . . . . . . . . . . . A7

INDEX . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A10

ENGINE ARRANGEMENT

ENGINE AR

GENERAL AR

BASIC ENGINE

BARRING GP

BASE GP-VALVE COVER

CAMSHAFT GP

COUPLING GP-GENERATOR

COVER GP-CYLINDER BLOCK

COVER GP-FLYWHEEL HOUSING

COVER GP-FRONT HOUSING

COVER GP-VALVE MECHANISM

CRANKSHAFT GP

CYLINDER BLOCK AS

CYLINDER BLOCK GP

CYLINDER HEAD AS

CYLINDER HEAD GP

DAMPER GP

DRIVE GP-ACCESSORY

FLYWHEEL GP

GEAR GP-FRONT

GEAR GP-REAR

GUARD GP-DAMPER

HOSE GP-ENGINE

HOUSING GP-FLYWHEEL

HOUSING GP-FRONT

LIFTING GP-ENGINE

MOUNTING GP-ENGINE

MOUNTING GP-ENGINE &

GENERATOR

PAN GP-OIL

PISTON & ROD GP

SEAL GP-CRANKSHAFT

VALVE GP-EXPLOSION RELIEF

VALVE MECHANISM GP

LUBRICATION SYSTEM

BREATHER GP

FILLER GP-ENGINE OIL

FILTER GP-ENGINE OIL

FILTER GP-FUMES DISPOSAL

FUMES DISPOSAL GP

GAUGE GP-OIL LEVEL (DIPSTICK)

LINES GP-ENGINE OIL

LINES GP-TURBOCHARGER OIL

PUMP GP-ENGINE OIL

PUMP GP-PRELUBRICATION

SHIELD GP-ENGINE OIL LINES

VALVE GP-FLUID CONTROL

COOLING SYSTEM

CONNECTION GP-WATER

COOLER GP-ENGINE OIL

CORE GP-OIL COOLER

HEAT EXCHANGER GP

HOUSING & REGULATOR GP

LINES GP-AUXILIARY SEA WATER

LINES GP-TURBOCHARGER

WATER

LINES GP-WATER

PLATE GP-HEAT EXCHANGER

PLUG GP-WATER LINES

PUMP GP-AUXILIARY SEA WATER

PUMP GP-AUXILIARY WATER

PUMP GP-WATER

SWITCH GP-COOLANT LEVEL

TANK GP-EXPANSION

VALVE GP-CHECK

AIR INLET AND EXHAUST SYSTEM

ADAPTER GP-AIR CLEANER

AFTERCOOLER GP-TREATED

WATER

AIR CLEANER GP

CARTRIDGE GP-TURBOCHARGER

DAMPER GP-AIR SHUTOFF

LINES GP-TURBOCHARGER AIR

MANIFOLD GP-EXHAUST

MOUNTING GP-AIR CLEANER

MOUNTING GP-BELLOWS

SHIELD GP-EXHAUST

SHUTOFF AS-AIR

SHUTOFF GP-AIR

TURBOCHARGER GP

FUEL SYSTEM

FILTER GP-FUEL

FILTER GP-WATER SEP & FUEL

LINES GP-FUEL

LINES GP-FUEL INJECTION

MANIFOLD GP-FUEL

MOUNTING GP-FUEL FILTER

PUMP GP-FUEL INJECTION

PUMP GP-FUEL PRIMING

PUMP GP-FUEL TRANSFER

SHIELD GP-FUEL LINES

ELECTRICAL AND STARTING

SYSTEM

BATTERY CHARGER

NAME PAGE NAME PAGE

TABLE OF CONTENTS

A2 TABLE OF CONTENTS SEBP4026-22

BATTERY CHARGER GP

BATTERY GP

BOX AS-CONTROL

BOX GP-ELECTRONIC

BOX GP-JUNCTION

CONTACTOR GP

CONTROL & MTG GP-ENGINE

ELEK

CONTROL GP-ENGINE

ELECTRONIC

COVER GP-MODULE CONNECTOR

HARNESS AS-BOX

HARNESS AS-ENGINE

HARNESS AS-PANEL

HARNESS AS-SENSOR

HARNESS AS-WIRING

HEATER GP-JACKET WATER

LINES GP-AIR STARTING

LUBRICATOR GP-AIR MOTOR

MOUNTING GP-BATTERY

MOUNTING GP-BATTERY

CHARGER

MOUNTING GP-BOX

MOUNTING GP-JACKET WTR

HEATER

RELAY GP

SENSOR GP-EXHAUST

TEMPERATURE

SENSOR GP-PRESSURE

SENSOR GP-SPEED

SENSOR GP-TEMP & PRESS

SENSOR GP-TEMPERATURE

SILENCER GP-AIR STARTING

STARTING MOTOR GP-AIR

STRAINER GP-AIR LINES

SUPPORT GP-BATTERY

SWITCH GP-MAGNETIC

SWITCH GP-TOGGLE

VALVE AS-SOLENOID

VALVE GP-PRESSURE REDUCING

WIRING GP-AIR SHUTOFF

WIRING GP-ENGINE

WIRING GP-PANEL

WIRING GP-SENSOR

ENCLOSURES, GUARDS AND BASES

BASE AS

GUARD GP-ENGINE

MOUNTING GP-VIBRATION

ISOLATOR

OPERATOR STATION

BOX GP-INSTRUMENT PANEL

CONTROL GP-GENERATOR SET

CONTROL GP-MONITOR

DISPLAY GP-MONITOR

LAMP GP-PANEL ILLUMINATION

MODULE GP-ALARM

MOUNTING GP-CONTROL PANEL

MOUNTING GP-INSTRUMENT

PANEL

PANEL AR-CONTROL

PANEL GP-ELECTRONIC

SERVICE EQUIPMENT AND

SUPPLIES

CHART-PLATE & FILM

COVER GP-SHIPPING

PROGRAMMER-GOV ELEK

CONTROL

SHIELD GP-PROTECTION

PART NUMBER INDEX . . . . . . . . . . . . . . . . . . . . . . . . . B1

TABLE OF CONTENTS

SEBP4026-22 GENERAL INFORMATION A3

1. ENGINE IDENTIFICATION

Cat engines are identified with Serial Numbers and Arrangement Numbers. In some cases, Modification Numbers are also used. The serial number plate which shows these numbers is mounted on the engine.

Cat dealers need this information to determine which components were included on the engine when it was assembled at the factory. This permits accurate identification of replacement part numbers.

2. ORDERING PARTS

Quality Cat replacement parts are available from Cat dealers throughout the world. Their parts inventories are up to date and include all parts normally required to protect your investment in Cat Engines. Dealers may offer repair kits or remanufactured parts to allow selection of the most effective repair alternative for a particular situation. When ordering parts, your order should specify the quantity, part number, part name, and the serial number/product identification number of the engine for which the parts are needed.

3. PARTS MANUAL ORGANIZATION

Product information in this manual is presented as "information elements" that represent all of the components for the specific model. An Engine Arrangement is an example of an information element.

The information elements are organized alphabetically by part name and secondarily by part number within each major section of the manual.

4. TABLE OF CONTENTS

A table of contents (TOC) is found at the beginning of the manual. The TOC lists each section of the manual with a complete list of all information elements organized as they appear in the manual. Page numbers are provided for quick reference to detailed parts identification illustrations and serviceable consist lists.

5. MAINTENANCE PARTS INDEX

The Maintenance Parts Index, located near the beginning of the manual, references most frequently used maintenance part numbers, providing description, quantity, usage and page number. This information is organized alphabetically by part description.

6. INDEX

The index located near the front of the manual is an alphabetical listing of all information elements included in the manual. Page numbers are provided for quick reference to detailed parts identification illustrations and serviceable consist lists.

7. PART NUMBER INDEX

A numerical index listing all part numbers and the corresponding page number(s) appears at the back of the manual.

8. CAPTIONS

Captions located at the beginning each information element identify the part number and part name along with additional descriptive information. S/N information found in each caption should be used to select correct information for a specific engine. Field replacement options, identification of optional attachment components, and where used ("part of") information is also provided.

The first line of a caption is shown in larger type font to indicate the beginning of an information element.

Captions for additional pages that may be required to illustrate an information element will be shown in standard type font and will include the term (contd.) .

9. NON-SERVICED PARTS

In some instances it is necessary to display non-serviced parts that are a link to lower level serviceable consist lists. These non-serviced part numbers are shown in italic type indicating that they are not available. All consist lists have not been converted to reflect this enhancement.

GENERAL INFORMATION

A4 GENERAL INFORMATION SEBP4026-22

10. PARTS LIST REFERENCE NUMBERS

Numbers shown in the Ref No column correspond to numbers used in the associated graphic(s). An alphabetic suffix may be added to a reference number to identify lower level consist items. Numbers shown in the Graphic Ref column refer to the graphic number identifier displayed in the lower left corner of each illustration. The Graphic Ref number may be used in combination with the item Ref No to determine the correct part number.

There may be intentional omission of a Ref No in a consist list as information is updated to reflect the latest serviceable part numbers.

11. INDENTED PART NAMES

When a part name is indented in a parts list, it is part of (included in) the group or assembly under which it is indented.

12. ILLUSTRATION REFERENCE LETTERS

When necessary, illustrations contain reference letters (A, B, C etc.) that are intended to track lines and harnesses from one point to another. They are also used to show where to reconnect illustrations that have been separated.

13. ABBREVIATIONS AND SYMBOLS

O.D. – Outside Diameter I.D. – Inside Diameter A – Not Part Of This Group B – Use As Required C – Change From Previous Type D – Order By The Meter E – Order By The Centimeter F – Not Shown G – Order By The Inch I – Refer To Hydraulic Information System M – Metric Part R – Remfg Part May Be Available Y – Separate Illustration Z – Not Serviced Separately

14. DESCRIPTION OF TYPE CHANGES

Type - A type is defined as any configuration change that requires an additional Information Element for an Arrangement, Group, or Assembly. If serial number breaks for types are not available, a type # ( Type 1, Type 2, etc.) will be displayed in the caption. These "type" changes are identified with a "C" note (change from previous type) in the Parts List. Only the "types" that apply to this Parts Manual will be included. Additional types may exist causing "C" notes to appear on an Information Element when no other types are shown.

15. <END>

This symbol indicates the end of an information element.

NOTE:

Continuing improvement and advancement of product design may cause changes to your engine which may not be included in this publication. Whenever a question arises regarding your Cat product or this publication, please consult your Cat dealer for the latest available information.

GENERAL INFORMATION

SEBP4026-22 REPAIR ALTERNATIVES A5

REMANUFACTURED COMPONENTS

As an option when making repairs consider Cat Remanufactured Components. Components that are available through the Cat Remanufactured Program are identified three ways in the parts book:

• with the letter R in the note field of the parts list

• with an R* at the beginning of the first line of the caption

• with an *R at the end of the first line of the caption

Typical components included in the Remanufacturing Program include:

ALTERNATORS

CONNECTING RODS

CRANKSHAFTS - UNDERSIZE

CRANKSHAFTS - UPGRADE TO NEW

CYLINDER HEADS

ELECTRONIC CONTROL MODULES (ECM)

ELECTRONIC SENSORS

FUEL INJECTORS

FUEL NOZZLES

FUEL PUMPS

GOVERNORS

OIL PUMPS

PISTONS

SHORT BLOCKS

STARTERS

TURBOCHARGERS - COMPLETE

TURBOCHARGER CARTRIDGES

WATER PUMPS

Cat Remanufactured engines for many engine arrangements are also available.

REPAIR ALTERNATIVES

A6 SUPPLEMENTAL COOLANT ADDITIVES SEBP4026-22

CUSTOMER BENEFITS:

Protects against cavitation, foam, erosion, corrosion, and scale buildup in cooling systems.

• Provides measured coolant conditioner.

DESCRIPTION:

Additives deplete from the coolant with normal operation. For this reason, Supplemental Coolant Additives (SCA) must be added to all heavy duty coolants at regular intervals. In addition, when not using a fully formulated, pre-charged antifreeze, like Cat DEAC, an initial charge of SCA must be added to the cooling system. The amount of SCA added to the system is dependent on the capacity of the system.

The SCA for initial fill is provided as a liquid. SCA's for maintenance intervals are available in liquid form and as a spin-on element. (No Spin-on available for 3600 Family of Engines)

NOTE:

The amount of SCA added at initial fill is not the same as the amount added at maintenance intervals.

The coolant additive elements can be used with any ethylene or propylene glycol type antifreeze which meets ASTM D4985 or ASTM D5345 Specifications.

NOTE:

For use with standard heavy duty coolant only, not for use with Extended Life Coolant.

PARTS NEEDED:

Cooling System Capacity Liquid SCA at Initial Fill Liquid SCA at

Maintenance* Spin-on SCA Maintenance

Element*Liters Gallons

22-30 (6-8) 3P-2044 (1) 6V-3542 (1) 111-2370 (1)

30-38 (8-10) 3P-2044 (1) 6V-3542 (1) 111-2372 (1) 111-2369 (1)

38-49 (10-13) 3P-2044 (1) 8T-1589 (1) 111-2372 (1) 111-2369 (1)

49-64 (13-17) 3P-2044 (2) 8T-1589 (1) 9N-3368 (1)

64-83 (17-22) 3P-2044 (2) 8T-1589 (1)

111-2372 (1) 6V-3542 (1) 111-2371 (1)

83-114 (22-30) 3P-2044 (3) 8T-1589 (1) 3P-2044 (1) 9N-3718 (1)

114-163 (30-43) 3P-2044 (5) 3P-2044 (1) 6V-3542 (1) 111-2371 (2)

163-242 (43-64) 3P-2044 (8) 3P-2044 (2) 9N-3718 (2)

* Normal maintenance period is 250 hrs. See your Operation and Maintenance Manual for complete coolant maintenance instructions.

( ) Indicates quantity required.

SUPPLEMENTAL COOLANT ADDITIVES

SEBP4026-22 MAINTENANCE PARTS A7

AIR INLET AND EXHAUST SYSTEM

FILTER ELEMENT AS-AIR (PRIMARY) 4P-0710 1 AIR CLEANER GP 171

BASIC ENGINE

KEY 5N-8539 1 COUPLING GP-GENERATOR 10

PLUG-OIL DRAIN (ENGINE OIL PAN) 4B-2363 2 PAN GP-OIL 60

SCREEN AS-SUCTION (ENGINE OIL

PAN)

1W-1564 1 PAN GP-OIL 60

SEAL-INTEGRAL 234-8937 2 COVER GP-FLYWHEEL HOUSING 13

SEAL-VALVE COVER (BASE) 272-0760 1 COVER GP-VALVE MECHANISM 16

COOLING SYSTEM

CAP-PRESSURE (14-PSI) (EXPANSION

TANK)

127-8660 1 TANK GP-EXPANSION 164

CAP-PRESSURE (7-PSI) (EXPANSION

TANK)

4N-3311 1 TANK GP-EXPANSION 164

KIT-COOLING SYSTEM PARTS (14-PSI)

(EXPANSION TANK)

295-5458 1 TANK GP-EXPANSION 165

KIT-COOLING SYSTEM PARTS (7-PSI)

(EXPANSION TANK)

294-9052 1 TANK GP-EXPANSION 164

PLUG-DRAIN 9M-4202 1 LINES GP-WATER 118

1 LINES GP-WATER 120

REGULATOR-TEMPERATURE (30-DEG

C) (WATER)

219-3240 2 HOUSING & REGULATOR GP 109

REGULATOR-TEMPERATURE (92-DEG

C) (WATER)

248-5513 4 HOUSING & REGULATOR GP 110

4 LINES GP-WATER 128

REGULATOR-WATER TEMPERATURE

(92-DEG C)

6I-4950 4 LINES GP-WATER 124

ROD AS-ZINC 116-7011 1 LINES GP-AUXILIARY SEA WATER 111

ROD AS-ZINC (HEAT EXCHANGER) 116-7011 1 LINES GP-WATER 135

2 LINES GP-WATER 136

ROD-ZINC 116-7009 1 LINES GP-AUXILIARY SEA WATER 111

6L-2280 1 LINES GP-AUXILIARY SEA WATER 111

SEAL-LIP TYPE (WATER

TEMPERATURE REGULATOR)

3S-9643 2 HOUSING & REGULATOR GP 109

4 HOUSING & REGULATOR GP 110

4 LINES GP-WATER 124

4 LINES GP-WATER 128

ELECTRICAL AND STARTING SYSTEM

BATTERY GP (12-VOLT) (DRY) 9X-9730 2 BATTERY GP 243

BREATHER AS (ATMOSPHERIC) 9G-5127 1 WIRING GP-ENGINE 341

CIRCUIT BREAKER AS (20-AMPERE,

DOUBLE POLE)

231-9866 3 BOX GP-JUNCTION 249

CIRCUIT BREAKER AS (20-AMPERE,

DOUBLE POLE) (MARINE POWER

DISPLAY)

231-9866 1 BOX GP-JUNCTION 252

CIRCUIT BREAKER AS (20-AMPERE,

DOUBLE POLE) (PRIMARY ECM)

231-9866 1 BOX GP-JUNCTION 252

DESCRIPTION

PART

NUMBER QTY WHERE USED PAGE

MAINTENANCE PARTS

A8 MAINTENANCE PARTS SEBP4026-22

CIRCUIT BREAKER AS (20-AMPERE,

DOUBLE POLE) (SECONDARY ECM)

231-9866 1 BOX GP-JUNCTION 252

CIRCUIT BREAKER AS (40-AMPERE,

DOUBLE POLE)

231-9864 1 BOX GP-JUNCTION 249

CIRCUIT BREAKER AS (40-AMPERE,

DOUBLE POLE) (AIR SHUTOFF)

231-9864 1 BOX GP-JUNCTION 252

CIRCUIT BREAKER AS (40-AMPERE)

(PRELUBRICATION)

9Y-0951 1 BOX GP-JUNCTION 255

1 BOX GP-JUNCTION 257

CIRCUIT BREAKER AS (70-AMPERE,

DOUBLE POLE)

231-9863 1 BOX GP-JUNCTION 249

CIRCUIT BREAKER AS (70-AMPERE,

DOUBLE POLE) (ALTERNATOR,

STARTING MOTOR)

231-9863 1 BOX GP-JUNCTION 252

GASKET 131-4731 1 HARNESS AS-ENGINE 277

1 HARNESS AS-ENGINE 281

MAT-BATTERY 9M-5775 2 MOUNTING GP-BATTERY 299

2 MOUNTING GP-BATTERY 300

2 MOUNTING GP-BATTERY 302

SCREEN-STRAINER (STARTING MOTOR

AIR LINES)

146-5216 1 STRAINER GP-AIR LINES 332

ENCLOSURES, GUARDS AND BASES

PLUG-OIL DRAIN (BASE) 4B-2363 1 BASE AS 352

SCREEN AS-SUCTION (BASE) 1W-1564 1 BASE AS 352

ENGINE ARRANGEMENT

FILTER-SOOT 115-3634 1 GENERAL AR 4

1 GENERAL AR 6

FUEL SYSTEM

FILTER ELEMENT-FUEL (ADVANCED

EFFICIENCY)

1R-0756 7 FILTER GP-FUEL 214

FILTER ELEMENT-FUEL (WATER

SEPARATOR)

134-6307 3 FILTER GP-WATER SEP & FUEL 219

LUBRICATION SYSTEM

BREATHER AS (CRANKCASE) 4W-3027 3 BREATHER GP 70

3 BREATHER GP 71

FILTER ELEMENT AS-ENGINE OIL

(STANDARD EFFICIENCY)

1R-0726 4 FILTER GP-ENGINE OIL 73

FILTER ELEMENT-BREATHER 164-6735 1 FILTER GP-FUMES DISPOSAL 78

GASKET 4P-4460 2 LINES GP-TURBOCHARGER OIL 90

SEAL-VALVE COVER (BREATHER) 272-0760 3 BREATHER GP 70

3 BREATHER GP 71

STRAINER AS (PRELUBRICATION

PUMP)

2G-6304 2 PUMP GP-PRELUBRICATION 95

OPERATOR STATION

CIRCUIT BREAKER AS (10-AMPERE) 114-1142 1 PANEL AR-CONTROL 378

DESCRIPTION

PART

SEBP4026-22 MAINTENANCE PARTS A9

CIRCUIT BREAKER AS (20-AMPERE) 116-7654 1 PANEL GP-ELECTRONIC 382

1 PANEL GP-ELECTRONIC 385

1 PANEL GP-ELECTRONIC 389

LAMP-LED (24-VOLT, AMBER) 125-9956 1 BOX GP-INSTRUMENT PANEL 357

LAMP-LED (24-VOLT, GREEN) 125-9957 1 BOX GP-INSTRUMENT PANEL 357

1 LAMP GP-PANEL ILLUMINATION 367

LAMP-LED (24-VOLT, RED) 125-9955 2 BOX GP-INSTRUMENT PANEL 357

DESCRIPTION

PART

A10 INDEX SEBP4026-22

A

ADAPTER GP-AIR CLEANER

AFTERCOOLER GP-TREATED WATER

AIR CLEANER GP

B

BARRING GP–LH

BASE AS

BASE GP-VALVE COVER

BATTERY CHARGER

BATTERY CHARGER GP

BATTERY GP

BATTERY GP (12-VOLT) (DRY)

BATTERY GP–DRY

BOX AS-CONTROL

BOX GP-ELECTRONIC

BOX GP-INSTRUMENT PANEL

BOX GP-JUNCTION–POWER DISTRIBUTION. . . 249

BOX GP-JUNCTION–PRELUBRICATION

BREATHER AS (ATMOSPHERIC)

BREATHER AS (CRANKCASE)

BREATHER GP–CRANKCASE

C

CAMSHAFT GP

CAP-PRESSURE (14-PSI) (EXPANSION

TANK)

CAP-PRESSURE (7-PSI) (EXPANSION

TANK)

CARTRIDGE GP-TURBOCHARGER

CHART-PLATE & FILM

CIRCUIT BREAKER AS (10-AMPERE)

CIRCUIT BREAKER AS (20-AMPERE, DOUBLE

POLE)

CIRCUIT BREAKER AS (20-AMPERE, DOUBLE

POLE) (MARINE POWER DISPLAY)

CIRCUIT BREAKER AS (20-AMPERE, DOUBLE

POLE) (PRIMARY ECM)

CIRCUIT BREAKER AS (20-AMPERE, DOUBLE

POLE) (SECONDARY ECM)

CIRCUIT BREAKER AS (20-AMPERE)

CIRCUIT BREAKER AS (40-AMPERE, DOUBLE

POLE)

CIRCUIT BREAKER AS (40-AMPERE, DOUBLE

POLE) (AIR SHUTOFF)

CIRCUIT BREAKER AS (40-AMPERE)

(PRELUBRICATION)

CIRCUIT BREAKER AS (70-AMPERE, DOUBLE

POLE)

CIRCUIT BREAKER AS (70-AMPERE, DOUBLE

POLE) (ALTERNATOR, STARTING

MOTOR)

CONNECTION GP-WATER

CONNECTION GP-WATER–INLET, LH

CONTACTOR GP

CONTROL (LOAD CONTROL,

SYNCHRONIZER)

CONTROL & MTG GP-ENGINE ELEK

CONTROL & MTG GP-ENGINE ELEK–

PRIMARY

CONTROL & MTG GP-ENGINE ELEK–

SECONDARY

CONTROL GP-ENGINE ELECTRONIC

CONTROL GP-ENGINE MONITORING (RESISTIVE

TEMPERATURE DEVICE)

CONTROL GP-GENERATOR SET

CONTROL GP-GENERATOR SET–EMCP 3.3. . . 361

CONTROL GP-MONITOR

COOLER GP-ENGINE OIL

CORE AS-AFTERCOOLER

CORE GP-OIL COOLER–ENGINE

COUPLING GP-GENERATOR

COVER GP-CYLINDER BLOCK–CENTRAL

STRUCTURE

COVER GP-FLYWHEEL HOUSING

COVER GP-FRONT HOUSING

COVER GP-MODULE CONNECTOR

COVER GP-SHIPPING

COVER GP-VALVE MECHANISM

CRANKSHAFT GP

CYLINDER BLOCK AS

CYLINDER BLOCK GP

CYLINDER HEAD AS

CYLINDER HEAD GP

INDEX

SEBP4026-22 INDEX A11

D

DAMPER GP

DAMPER GP-AIR SHUTOFF

DISPLAY GP-MONITOR–MARINE POWER

DISPLAY

DRIVE GP-ACCESSORY–LOWER, LH

E

ELECTRONICS GP-ENGINE RATINGS

ENGINE AR

F

FASTENER GP-CYLINDER HEAD

FILLER GP-ENGINE OIL–BLOCK

FILM-CERTIFICATION (EMCP 3)

FILM-IDENTIFICATION (CAT)

FILM-IDENTIFICATION (EMCP 3.3)

FILM-IDENTIFICATION (ENGINE OIL FILL)

FILM-IDENTIFICATION (POWER

DISTRIBUTION)

FILM-INFORMATION (ANNUNCIATOR)

FILM-INFORMATION (EMCP 3

ANNUNCIATOR)

FILM-INFORMATION (ROTATION, FIRING

ORDER)

FILM-INFORMATION (STANDARD ROTATION) . . . 9

FILM-WARNING (DO NOT OPERATE, READ

OMM)

FILM-WARNING (HOT FLUID UNDER PRESSURE,

U.S.)

FILM-WARNING (HOT SURFACE)

FILM-WARNING (NO WELD, READ OMM)

FILM-WARNING (VAPOR EXPLOSION)

FILTER ELEMENT AS-AIR (PRIMARY)

FILTER ELEMENT AS-ENGINE OIL (STANDARD

EFFICIENCY)

FILTER ELEMENT-BREATHER

FILTER ELEMENT-FUEL (ADVANCED

EFFICIENCY)

FILTER ELEMENT-FUEL (WATER

SEPARATOR)

FILTER GP-ENGINE OIL–DUPLEX

FILTER GP-FUEL–DUPLEX

FILTER GP-FUMES DISPOSAL

FILTER GP-WATER SEP & FUEL

FILTER-SOOT

FLYWHEEL GP

FUMES DISPOSAL GP

G

GASKET

GAUGE AS-OIL LEVEL (DIPSTICK) (DEEP

SUMP)

GAUGE GP-OIL LEVEL (DIPSTICK)–DEEP

SUMP

GEAR GP-FRONT

GEAR GP-REAR–CAMSHAFT DRIVE

GENERAL AR

GENERATOR GP

GUARD GP-DAMPER

GUARD GP-ENGINE

H

HARNESS AS-BOX

HARNESS AS-BOX (INTERCONNECT)

HARNESS AS-BOX (POWER

DISTRIBUTION)

HARNESS AS-BOX–INTERCONNECT

HARNESS AS-BOX–POWER DISTRIBUTION . . . 272

HARNESS AS-CONTROL

HARNESS AS-ENGINE

HARNESS AS-ENGINE (CONTROL PANEL

INTERFACE)

HARNESS AS-ENGINE–AIR SHUTOFF

HARNESS AS-ENGINE–CONTROL PANEL

INTERFACE

HARNESS AS-ENGINE–MARINE POWER

DISPLAY

HARNESS AS-ENGINE–RH

HARNESS AS-PANEL

HARNESS AS-PANEL (RELAY)

HARNESS AS-PANEL–MARINE POWER

DISPLAY

HARNESS AS-POWER

HARNESS AS-SENSOR (ENGINE OIL

TEMPERATURE)

HARNESS AS-SENSOR (OIL, FUEL PRESSURE,

LH SERVICE) (OIL, FUEL PRESSURE, RH

SERVICE)

HARNESS AS-SENSOR–OIL TEMPERATURE . . 287

HARNESS AS-SENSOR–OIL, FUEL PRESSURE,

RH SERVICE

HARNESS AS-SENSOR–THERMOCOUPLE

A12 INDEX SEBP4026-22

HARNESS AS-WIRING (PYROMETER

INTERCONNECT)

HARNESS AS-WIRING–CUSTOMER

CONNECT

HARNESS AS-WIRING–MAGNETIC SWITCH . . . 291

HARNESS AS-WIRING–THERMOCOUPLE,

LH

HARNESS AS-WIRING–THERMOCOUPLE,

RH

HEAT EXCHANGER GP–SEA WATER

HEATER GP-JACKET WATER

HOSE GP-ENGINE

HOUSING & REGULATOR GP–INLET

CONTROL

HOUSING GP-FLYWHEEL

HOUSING GP-FRONT–ACCESSORY DRIVE

I

INDICATOR (VALVE POSITION)

K

KEY

KIT-COOLING SYSTEM PARTS (14-PSI)

(EXPANSION TANK)

KIT-COOLING SYSTEM PARTS (7-PSI)

(EXPANSION TANK)

L

LAMP GP-PANEL ILLUMINATION

LAMP-LED (24-VOLT, AMBER)

LAMP-LED (24-VOLT, GREEN)

LAMP-LED (24-VOLT, RED)

LIFTING GP-ENGINE

LINES GP-AIR STARTING

LINES GP-AUXILIARY SEA WATER

LINES GP-ENGINE OIL

LINES GP-FUEL

LINES GP-FUEL INJECTION

LINES GP-TURBOCHARGER AIR–INLET

LINES GP-TURBOCHARGER OIL

LINES GP-TURBOCHARGER WATER

LINES GP-WATER–AFTERCOOLER

LINES GP-WATER–HEAT EXCHANGER

LINES GP-WATER–LOWER

LINES GP-WATER–UPPER

LUBRICATOR GP-AIR MOTOR

M

MANIFOLD GP-EXHAUST

MANIFOLD GP-FUEL–LH

MANIFOLD GP-FUEL–RH

MAT-BATTERY

MODULE GP-ALARM

MOUNTING GP-AIR CLEANER

MOUNTING GP-BATTERY

MOUNTING GP-BATTERY CHARGER

MOUNTING GP-BELLOWS–EXHAUST

MOUNTING GP-BELLOWS–INTAKE

MOUNTING GP-BOX–POWER

DISTRIBUTION

MOUNTING GP-CONTROL PANEL

MOUNTING GP-CONTROL PANEL–

PRELUBRICATION

MOUNTING GP-ENGINE

MOUNTING GP-ENGINE & GENERATOR

MOUNTING GP-FUEL FILTER

MOUNTING GP-INSTRUMENT PANEL

MOUNTING GP-JACKET WTR HEATER

MOUNTING GP-VIBRATION ISOLATOR

P

PAN GP-OIL

PANEL AR-CONTROL–PRELUBRICATION

PANEL GP-ELECTRONIC–EMCP 3.3

PANEL GP-ELECTRONIC–RELAY

PISTON & ROD GP

PLATE & FILM GP (ENGINE

INFORMATION)

PLATE GP-HEAT EXCHANGER

PLUG GP-INSTRUMENT PANEL

SEBP4026-22 INDEX A13

PLUG GP-WATER LINES

PLUG-DRAIN

PLUG-OIL DRAIN (BASE)

PLUG-OIL DRAIN (ENGINE OIL PAN)

PROGRAMMER-GOV ELEK CONTROL

PUMP GP-AUXILIARY SEA WATER

PUMP GP-AUXILIARY WATER

PUMP GP-ENGINE OIL–2-SECTION GEAR

PUMP GP-ENGINE OIL–MANUAL

LUBRICATION

PUMP GP-FUEL INJECTION

PUMP GP-FUEL PRIMING

PUMP GP-FUEL PRIMING–RH

PUMP GP-FUEL TRANSFER–1-SECTION

GEAR

PUMP GP-PRELUBRICATION

PUMP GP-PRELUBRICATION–ELECTRIC

PUMP GP-WATER

R

REGULATOR GP-VOLTAGE

REGULATOR-TEMPERATURE (30-DEG C)

(WATER)

REGULATOR-TEMPERATURE (92-DEG C)

(WATER)

REGULATOR-WATER TEMPERATURE (92-DEG

C)

RELAY (10-AMPERE, 24-VOLT) (FUEL

LEVEL)

RELAY (24-VOLT) (ECM ENERGIZE)

RELAY (24-VOLT) (ENGINE CONTROL SWITCH IN

START)

RELAY (24-VOLT) (POWER)

RELAY (24-VOLT) (REFERENCE

SELECTION)

RELAY (24-VOLT) (RESET 1)

RELAY (24-VOLT) (RESET 2)

RELAY (24-VOLT) (RUN 1)

RELAY (24-VOLT) (RUN 2)

RELAY (24-VOLT) (START ENABLE)

RELAY (24-VOLT) (STOP 1)

RELAY (24-VOLT) (STOP 2)

RELAY (24-VOLT) (STOP ENABLE)

RELAY GP

ROD AS-ZINC

ROD AS-ZINC (HEAT EXCHANGER)

ROD-ZINC

S

SCREEN AS-SUCTION (BASE)

SCREEN AS-SUCTION (ENGINE OIL PAN)

SCREEN-STRAINER (STARTING MOTOR AIR

LINES)

SEAL GP (WATER PUMP)

SEAL GP (WATER PUMP)

SEAL GP-CRANKSHAFT

SEAL-INTEGRAL

SEAL-LIP TYPE (WATER TEMPERATURE

REGULATOR)

SEAL-VALVE COVER (BASE)

SEAL-VALVE COVER (BREATHER)

SENSOR AS-PRESSURE (ENGINE OIL)

SENSOR AS-PRESSURE (FILTERED FUEL) . . . 349

SENSOR AS-PRESSURE (FILTERED OIL)

SENSOR AS-PRESSURE (UNFILTERED

FUEL)

SENSOR AS-PRESSURE (UNFILTERED

OIL)

SENSOR AS-SPEED

SENSOR GP-EXHAUST TEMPERATURE

SENSOR GP-EXHAUST TEMPERATURE

(TURBOCHARGER OUTLET, LH)

SENSOR GP-EXHAUST TEMPERATURE

(TURBOCHARGER OUTLET, RH)

SENSOR GP-PRESSURE

SENSOR GP-PRESSURE (ATMOSPHERIC)

SENSOR GP-PRESSURE (COOLANT)

SENSOR GP-PRESSURE (CRANKCASE)

SENSOR GP-PRESSURE (TURBOCHARGER

INLET, LH)

SENSOR GP-PRESSURE (TURBOCHARGER

INLET, RH)

SENSOR GP-PRESSURE (TURBOCHARGER

OUTLET)

A14 INDEX SEBP4026-22

SENSOR GP-SPEED

SENSOR GP-SPEED (CALIBRATION)

SENSOR GP-SPEED (ENGINE TIMING)

SENSOR GP-SPEED (ENGINE)

SENSOR GP-SPEED (PRIMARY, TIMING)

SENSOR GP-SPEED (SECONDARY,

TIMING)

SENSOR GP-SPEED–MAGNETIC, LOW

OUTPUT

SENSOR GP-TEMP & PRESS–ENGINE OIL

SENSOR GP-TEMPERATURE

SENSOR GP-TEMPERATURE

(AFTERCOOLER)

SENSOR GP-TEMPERATURE (ENGINE

COOLANT)

SENSOR GP-TEMPERATURE (ENGINE OIL) . . . 325

SENSOR GP-TEMPERATURE (EXHAUST)

SHIELD GP-ENGINE OIL LINES

SHIELD GP-EXHAUST–MANIFOLD

SHIELD GP-EXHAUST–TURBOCHARGER

SHIELD GP-FUEL LINES

SHIELD GP-PROTECTION–FUEL & OIL

LINES

SHUTOFF AS-AIR–INLET

SHUTOFF GP-AIR–ELECTRIC LEFT

SHUTOFF GP-AIR–ELECTRIC RIGHT

SHUTOFF GP-AIR–INLET

SHUTOFF GP-AIR–INLET, LH

SHUTOFF GP-AIR–INLET, RH

SILENCER GP-AIR STARTING

SOLENOID AS

SOLENOID AS (AIR SHUTOFF)

STARTING MOTOR GP-AIR

STRAINER AS (PRELUBRICATION PUMP)

STRAINER GP-AIR LINES

SUPPORT GP-BATTERY

SWITCH AS (TERMINATION)

SWITCH AS-LIMIT (AIR SHUTOFF)

SWITCH AS-MAGNETIC (24-VOLT) (AIR

SHUTOFF)

SWITCH AS-MAGNETIC (24-VOLT)

(PRELUBRICATION MOTOR)

SWITCH AS-MAGNETIC (24-VOLT)

(PRELUBRICATION PUMP)

SWITCH AS-MAGNETIC (24-VOLT) (STARTING

MOTOR)

SWITCH AS-PRESSURE (ENGINE OIL)

SWITCH AS-PRESSURE

(PRELUBRICATION)

SWITCH AS-PUSH BUTTON (EMERGENCY

STOP)

SWITCH AS-ROTARY (ENGINE CONTROL)

SWITCH GP-COOLANT LEVEL

SWITCH GP-MAGNETIC

SWITCH GP-TOGGLE

SWITCH GP-TOGGLE (CRANK OVERRIDE)

SWITCH GP-TOGGLE (GENERATOR)

SWITCH GP-TOGGLE (PRELUBRICATION

OVERRIDE)

SWITCH-CONTROL (PRELUBRICATION)

SWITCH-LIQUID LEVEL (COOLANT)

SWITCH-TOGGLE (ENGINE PROTECTION

OVERRIDE)

SWITCH-TOGGLE (TORQUE LIMIT)

T

TANK GP-EXPANSION

TURBOCHARGER GP

V

VALVE AS-SOLENOID (AIR START)

VALVE AS-SOLENOID–AIR START

VALVE GP-CHECK–AUXILIARY WATER

PUMP

SEBP4026-22 INDEX A15

VALVE GP-EXPLOSION RELIEF

(CRANKCASE)

VALVE GP-EXPLOSION RELIEF–

CRANKCASE

VALVE GP-FLUID CONTROL–DUPLEX OIL

VALVE GP-PRESSURE REDUCING

VALVE GP-RELAY

VALVE MECHANISM GP

W

WIRING GP-AIR SHUTOFF

WIRING GP-ENGINE

WIRING GP-PANEL–MARINE POWER

DISPLAY

WIRING GP-SENSOR–ENGINE OIL

TEMPERATURE

WIRING GP-SENSOR–OIL, FUEL PRESSURE, RH

SERVICE

MEMORANDA

A16 MEMORANDA SEBP4026-22

SEBP4026-22 1 of 2 ENGINE ARRANGEMENT 1

ENGINE ARRANGEMENT

262-1032 ENGINE AR

RATED SPEED 1800-RPM

PART OF 262-1014, 263-9106 GENERAL AR

SMCS-1000 i06158391

NOTE PART NUMBER QTY

PART NAME

1 2 3 4 5 6 (PRODUCT LEVEL)

SEE

PAGE

Y 107-7196 1 AFTERCOOLER GP-TREATED WATER 170

Y 247-4695 1 BREATHER GP (CRANKCASE) 70

S/N: NSC1-3

Y 282-9930 1 BREATHER GP (CRANKCASE) 71

S/N: NSC4-UP

Y 106-4586 1 CAMSHAFT GP 9

Y 8N-8993 1 CONNECTION GP-WATER (INLET, LH) 105

S/N: NSC1-6

Y 220-2677 1 CONTROL & MTG GP-ENGINE ELEK (PRIMARY) 263

Y 231-7069 1 CONTROL & MTG GP-ENGINE ELEK (SECONDARY) 264

Y 4W-5892 1 COOLER GP-ENGINE OIL 106

Y 281-2696 1 COVER GP-CYLINDER BLOCK (CENTRAL STRUCTURE) 11

Y 4W-1529 1 COVER GP-FLYWHEEL HOUSING (REAR STRUCTURE) 13

Y 107-0278 1 COVER GP-FRONT HOUSING 15

Y 101-0831 9 COVER GP-VALVE MECHANISM 16

Y 8N-7103 1 CRANKSHAFT GP 17

Y 240-6651 1 CYLINDER BLOCK GP 23

Y 101-0830 12 CYLINDER HEAD GP 32

Y 8N-0339 1 DAMPER GP 41

Y 7E-7647 1 DRIVE GP-ACCESSORY (LOWER, LH) 42

Y 271-3153 1 FILLER GP-ENGINE OIL 72

Y 7N-4851 1 FLYWHEEL GP 44

Y 7C-9784 1 GAUGE GP-OIL LEVEL (DIPSTICK) (DEEP SUMP) 81

Y 8N-7174 1 GEAR GP-FRONT (STANDARD ROTATION) (STANDARD

ROTATION)

Y 124-8395 1 GEAR GP-REAR (CAMSHAFT DRIVE) 47

Y 101-1269 1 HOUSING GP-FLYWHEEL 52

Y 4P-5426 1 HOUSING GP-FRONT (ACCESSORY DRIVE) (ACCESSORY

DRIVE)

Y 7E-6872 1 LIFTING GP-ENGINE 56

Y 242-6277 1 LINES GP-ENGINE OIL 82

Y 250-9261 1 LINES GP-FUEL 220

S/N: NSC1-6

Y 309-5092 1 LINES GP-FUEL (FUEL COOLER) 223

S/N: NSC7-UP

Y 234-8723 1 LINES GP-FUEL INJECTION 225

Y 173-2947 1 LINES GP-TURBOCHARGER AIR 175

Y 162-5719 1 LINES GP-TURBOCHARGER OIL 90

Y 241-4303 1 LINES GP-WATER (AFTERCOOLER) 124

Y 241-4306 1 LINES GP-WATER (AFTERCOOLER) 132

Y 114-3376 1 LINES GP-WATER (LOWER) 118

Y 161-4087 1 LINES GP-TURBOCHARGER WATER 115

Y 140-2666 1 LINES GP-WATER (UPPER) 122

Y 161-2502 1 MANIFOLD GP-EXHAUST 177

Y 223-6363 12 PISTON & ROD GP 62

S/N: NSC1-3

Y 281-6139 12 PISTON & ROD GP 64

S/N: NSC4-UP

Y 8N-6152 1 PUMP GP-ENGINE OIL (2-SECTION GEAR) 94

2 ENGINE ARRANGEMENT 2 of 2 SEBP4026-22

262-1032 ENGINE AR (contd.) i06158391

NOTE PART NUMBER QTY

PART NAME

1 2 3 4 5 6 (PRODUCT LEVEL)

SEE

PAGE

Y 256-3663 12 PUMP GP-FUEL INJECTION 232

Y 265-7992 1 PUMP GP-FUEL PRIMING (RH) 235

Y 8N-6151 1 PUMP GP-FUEL TRANSFER (1-SECTION GEAR) 239

Y 9Y-8175 1 PUMP GP-AUXILIARY WATER (AFTERCOOLER) 155

Y 2W-9729 1 PUMP GP-WATER 160

Y 8N-7643 1 HOUSING & REGULATOR GP (INLET CONTROL) 110

S/N: NSC1-6

Y 7W-3813 1 SEAL GP-CRANKSHAFT 66

Y 263-9597 12 SENSOR GP-TEMPERATURE (EXHAUST) 329

Y 200-2000 1 SHIELD GP-EXHAUST (MANIFOLD) 184

Y 200-1999 1 SHIELD GP-EXHAUST (TURBOCHARGER) 182

Y 250-0838 1 TANK GP-EXPANSION 164

Y 159-8828 1 TURBOCHARGER GP 207

Y 224-9869 12 VALVE MECHANISM GP 68

235-6316 1 ELECTRONICS GP-ENGINE RATINGS

S/N: NSC1-3

278-8317 1 ELECTRONICS GP-ENGINE RATINGS

S/N: NSC4-UP

PLEASE USE THE GASKET KIT LINK IN SIS OR

CONTACT YOUR LOCAL DEALER FOR THE LATEST GASKET

KIT INFORMATION

Y - SEPARATE ILLUSTRATION

<END>

SEBP4026-22 1 of 2 ENGINE ARRANGEMENT 3

262-1014 GENERAL AR

SMCS-1000, 4450 i05812349

NOTE PART NUMBER QTY

PART NAME

1 2 3 4 5 6 (PRODUCT LEVEL)

SEE

PAGE

Y 268-4718 2 ADAPTER GP-AIR CLEANER 169

Y 4P-0558 2 AIR CLEANER GP 171

Y 5R-7425 1 BARRING GP 7

Y 256-0610 1 BASE AS 352

Y 7L-7872 1 BATTERY GP (24-VOLT) 243

Y 274-6147 1 BOX GP-INSTRUMENT PANEL 357

Y 280-2619 1 BOX GP-JUNCTION 255

S/N: NSC13-UP

Y 231-9999 1 BOX GP-JUNCTION 249

Y 284-5428 1 CONTACTOR GP 259

S/N: NSC1-9

Y 328-1442 1 CONTACTOR GP 261

S/N: NSC10-UP

Y 277-8962 1 CONTROL GP-MONITOR 363

S/N: NSC13-UP

Y 263-3894 1 COUPLING GP-GENERATOR 10

Y 340-1487 2 COVER GP-SHIPPING 395

Y 262-1032 1 ENGINE AR 1

Y 120-4501 1 FILTER GP-ENGINE OIL (DUPLEX) 73

Y 7W-9743 1 FILTER GP-FUEL (DUPLEX) 214

Y 120-6704 1 FILTER GP-WATER SEP & FUEL 219

Y 262-7329 1 FUMES DISPOSAL GP 80

S/N: NSC1-12

Y 8N-9639 1 GUARD GP-DAMPER 49

Y 275-7814 1 GUARD GP-ENGINE 355

Y 7E-6248 2 HEATER GP-JACKET WATER 293

Y 266-0214 1 HOSE GP-ENGINE 51

Y 262-6893 1 LINES GP-AIR STARTING 295

Y 263-9580 1 LINES GP-AUXILIARY SEA WATER 111

Y 263-9576 1 LINES GP-FUEL 221

Y 286-5754 1 MOUNTING GP-AIR CLEANER 179

Y 263-9590 1 MOUNTING GP-BATTERY 299

Y 275-7713 1 MOUNTING GP-BATTERY CHARGER 304

S/N: NSC1-12

Y 263-9573 1 MOUNTING GP-BELLOWS (EXHAUST) 181

Y 268-3189 2 MOUNTING GP-BELLOWS (INTERFACE) 181

Y 286-5753 1 MOUNTING GP-BOX (POWER DISTRIBUTION) 305

Y 357-0895 1 MOUNTING GP-CONTROL PANEL (PRELUBRICATION) 373

S/N: NSC13-UP

Y 275-7714 1 MOUNTING GP-ENGINE 57

Y 263-9591 1 MOUNTING GP-ENGINE & GENERATOR 57

Y 263-9589 1 MOUNTING GP-FUEL FILTER 231

Y 365-4539 1 MOUNTING GP-INSTRUMENT PANEL 377

S/N: NSC13-UP

Y 262-0848 1 MOUNTING GP-JACKET WTR HEATER 306

Y 168-3627 8 MOUNTING GP-VIBRATION ISOLATOR 356

Y 260-0024 1 PANEL AR-CONTROL (PRELUBRICATION) 378

S/N: NSC13-UP

Y 271-4474 1 PANEL GP-ELECTRONIC (EMCP 3.3) 382

Y 259-9999 1 PANEL GP-ELECTRONIC (RELAY) 380

4 ENGINE ARRANGEMENT 2 of 2 SEBP4026-22

262-1014 GENERAL AR (contd.) i05812349

NOTE PART NUMBER QTY

PART NAME

1 2 3 4 5 6 (PRODUCT LEVEL)

SEE

PAGE

S/N: NSC13-UP

Y 283-5244 1 PUMP GP-AUXILIARY SEA WATER 144

Y 262-7294 1 PUMP GP-PRELUBRICATION 95

Y 263-9597 2 SENSOR GP-TEMPERATURE (EXHAUST) 329

S/N: NSC1-12

Y 244-0474 1 SHIELD GP-ENGINE OIL LINES 101

Y 246-0456 1 SHIELD GP-PROTECTION 397

Y 268-3764 1 SHIELD GP-FUEL LINES 240

Y 274-5749 1 SHUTOFF GP-AIR 193

Y 112-6597 1 SILENCER GP-AIR STARTING 330

Y 262-9826 1 STARTING MOTOR GP-AIR 331

Y 7N-4885 1 SWITCH GP-COOLANT LEVEL 163

Y 8N-8510 1 VALVE GP-EXPLOSION RELIEF (CRANKCASE) 67

Y 232-0889 1 WIRING GP-AIR SHUTOFF 339

Y 277-8960 1 WIRING GP-ENGINE 345

S/N: NSC13-UP

Y 260-0012 1 WIRING GP-ENGINE 341

Y 239-1472 1 WIRING GP-PANEL (MARINE POWER DISPLAY) 346

S/N: NSC13-UP

Y 255-0178 1 WIRING GP-SENSOR (ENGINE OIL TEMPERATURE) 350

Y 235-6276 1 WIRING GP-SENSOR (OIL, FUEL PRESSURE, RH

SERVICE)

263-3892 1 GENERATOR GP

265-8155 1 REGULATOR GP-VOLTAGE

193-3313 1 SWITCH AS (TERMINATION)

7W-0408 1 BATTERY CHARGER

S/N: NSC1-12

179-8943 1 CONTROL (LOAD CONTROL, SYNCHRONIZER)

115-3634 1 FILTER-SOOT

353-9022 1 KIT-CONNECTOR

S/N: NSC13-UP

(INCLUDES ENDBELL AS, PLUGS, PLUG AS, &

SOCKETS)

SEBP4026-22 1 of 2 ENGINE ARRANGEMENT 5

263-9106 GENERAL AR

SMCS-1000, 4450 i05754649

NOTE PART NUMBER QTY

PART NAME

1 2 3 4 5 6 (PRODUCT LEVEL)

SEE

PAGE

Y 268-4718 2 ADAPTER GP-AIR CLEANER 169

Y 4P-0558 2 AIR CLEANER GP 171

Y 5R-7425 1 BARRING GP 7

Y 256-0610 1 BASE AS 352

Y 7W-0408 1 BATTERY CHARGER 241

S/N: NSC1-12

Y 7L-7872 1 BATTERY GP (24-VOLT) 243

Y 353-5615 1 BOX GP-ELECTRONIC 247

S/N: NSC13-UP

Y 274-6147 1 BOX GP-INSTRUMENT PANEL 357

Y 231-9999 1 BOX GP-JUNCTION 249

Y 280-2619 1 BOX GP-JUNCTION 255

S/N: NSC13-UP

Y 263-9581 1 CONNECTION GP-WATER 104

Y 284-5428 1 CONTACTOR GP 259

S/N: NSC1-9

Y 328-1442 1 CONTACTOR GP 261

S/N: NSC10-UP

Y 277-8962 1 CONTROL GP-MONITOR 363

S/N: NSC13-UP

Y 263-3894 1 COUPLING GP-GENERATOR 10

Y 340-1487 2 COVER GP-SHIPPING 395

Y 262-1032 1 ENGINE AR 1

Y 120-4501 1 FILTER GP-ENGINE OIL (DUPLEX) 73

Y 7W-9743 1 FILTER GP-FUEL (DUPLEX) 214

Y 120-6704 1 FILTER GP-WATER SEP & FUEL 219

Y 262-7329 1 FUMES DISPOSAL GP 80

S/N: NSC1-12

Y 8N-9639 1 GUARD GP-DAMPER 49

Y 275-7814 1 GUARD GP-ENGINE 355

Y 7E-6248 2 HEATER GP-JACKET WATER 293

Y 266-0214 1 HOSE GP-ENGINE 51

Y 262-6893 1 LINES GP-AIR STARTING 295

Y 263-9580 1 LINES GP-AUXILIARY SEA WATER 111

Y 263-9576 1 LINES GP-FUEL 221

Y 286-5754 1 MOUNTING GP-AIR CLEANER 179

Y 263-9590 1 MOUNTING GP-BATTERY 299

Y 263-9573 1 MOUNTING GP-BELLOWS (EXHAUST) 181

Y 268-3189 2 MOUNTING GP-BELLOWS (INTERFACE) 181

Y 286-5753 1 MOUNTING GP-BOX (POWER DISTRIBUTION) 305

Y 275-7713 1 MOUNTING GP-BATTERY CHARGER 304

S/N: NSC1-12

Y 357-0895 1 MOUNTING GP-CONTROL PANEL (PRELUBRICATION) 373

S/N: NSC13-UP

Y 275-7714 1 MOUNTING GP-ENGINE 57

Y 263-9591 1 MOUNTING GP-ENGINE & GENERATOR 57

Y 263-9589 1 MOUNTING GP-FUEL FILTER 231

Y 365-4539 1 MOUNTING GP-INSTRUMENT PANEL 377

S/N: NSC13-UP

Y 262-0848 1 MOUNTING GP-JACKET WTR HEATER 306

6 ENGINE ARRANGEMENT 2 of 2 SEBP4026-22

263-9106 GENERAL AR (contd.) i05754649

NOTE PART NUMBER QTY

PART NAME

1 2 3 4 5 6 (PRODUCT LEVEL)

SEE

PAGE

Y 168-3627 8 MOUNTING GP-VIBRATION ISOLATOR 356

Y 260-0024 1 PANEL AR-CONTROL (PRELUBRICATION) 378

S/N: NSC13-UP

Y 271-4474 1 PANEL GP-ELECTRONIC (EMCP 3.3) 382

Y 259-9999 1 PANEL GP-ELECTRONIC (RELAY) 380

S/N: NSC13-UP

Y 140-2304 1 PROGRAMMER-GOV ELEK CONTROL 396

Y 262-7294 1 PUMP GP-PRELUBRICATION 95

Y 263-9597 1 SENSOR GP-TEMPERATURE (EXHAUST) 329

S/N: NSC1-12

Y 244-0474 1 SHIELD GP-ENGINE OIL LINES 101

Y 246-0456 1 SHIELD GP-PROTECTION 397

Y 268-3764 1 SHIELD GP-FUEL LINES 240

Y 274-5749 1 SHUTOFF GP-AIR 193

Y 112-6597 1 SILENCER GP-AIR STARTING 330

Y 262-9826 1 STARTING MOTOR GP-AIR 331

Y 7N-4885 1 SWITCH GP-COOLANT LEVEL 163

Y 8N-8510 1 VALVE GP-EXPLOSION RELIEF (CRANKCASE) 67

Y 232-0889 1 WIRING GP-AIR SHUTOFF 339

Y 277-8960 1 WIRING GP-ENGINE 345

S/N: NSC13-UP

Y 260-0012 1 WIRING GP-ENGINE 341

Y 239-1472 1 WIRING GP-PANEL (MARINE POWER DISPLAY) 346

S/N: NSC13-UP

Y 255-0178 1 WIRING GP-SENSOR (ENGINE OIL TEMPERATURE) 350

Y 235-6276 1 WIRING GP-SENSOR (OIL, FUEL PRESSURE, RH

SERVICE)

263-3892 1 GENERATOR GP

265-8155 1 REGULATOR GP-VOLTAGE

193-3313 1 SWITCH AS (TERMINATION)

179-8943 1 CONTROL (LOAD CONTROL, SYNCHRONIZER)

115-3634 1 FILTER-SOOT

353-9022 1 KIT-CONNECTOR

S/N: NSC13-UP

(INCLUDES PLUGS, PLUG AS, ENDBELL AS, &

SOCKETS)

SEBP4026-22 1 of 1 BASIC ENGINE 7

BASIC ENGINE

5R-7425 BARRING GP–LH

PART OF 262-1014, 263-9106 GENERAL AR

SMCS-1235 i07168768

NOTE

REF

NO

GRAPHIC

REF PART NUMBER QTY

PART NAME

1 2 3 4 5 6 (PRODUCT LEVEL)

SEE

PAGE

J 1 1 448-5087 1 TOOL-BARRING

2 1 4H-7869 1 GASKET

AVAILABLE REPAIR KIT(S):

J 450-3711 1 KIT-BUSHING

(INCLUDES BEARING & DOWEL)

J - KIT MARKED J SERVICES PART(S) MARKED J

GRAPHIC #1 <END> g00824462

8 BASIC ENGINE 1 of 1 SEBP4026-22

247-8341 BASE GP-VALVE COVER

PART OF 224-9869 VALVE MECHANISM GP

SMCS-1120 i02685870

NOTE

REF

NO

GRAPHIC

REF PART NUMBER QTY

PART NAME

1 2 3 4 5 6 (PRODUCT LEVEL)

SEE

PAGE

1 1 119-0839 1 SPACER (17.5X30.94X98-MM)

2 1 6V-6228 3 SEAL-O-RING

3 1 119-0838 1 SPACER (17.5X30.94X98-MM)

4 1 247-8340 1 BASE AS

4A 1 120-4339 1 WASHER-SPRING

4B 1 261-0195 1 DOWEL-HOLLOW

GRAPHIC #1 <END> g00842340

SEBP4026-22 1 of 1 BASIC ENGINE 9

106-4586 CAMSHAFT GP

SMCS-1210 i06285450

NOTE

REF

NO

GRAPHIC

REF PART NUMBER QTY

PART NAME

1 2 3 4 5 6 (PRODUCT LEVEL)

SEE

PAGE

R 1 1 452-2501 1 CAMSHAFT AS (REAR, RH)

1 4N-1650 1 DOWEL

2 1 5P-0076 16 BOLT-12 POINT HEAD (3/8-16X1.5-IN)

R 3 1 452-2502 1 CAMSHAFT AS (REAR, LH)

1 5B-5821 1 DOWEL

R 4 1 452-2503 1 CAMSHAFT AS (FRONT, LH)

1 4N-1650 1 DOWEL

C 5 1 7N-3218 2 WASHER-THRUST

6 1 0S-0509 2 BOLT (3/8-16X0.75-IN)

7 1 5M-2894 2 WASHER-HARD (10.2X18.5X2.5-MM THK)

R 8 1 452-2504 1 CAMSHAFT AS (FRONT, RH)

1 5B-5821 1 DOWEL

9 1 4W-6664 2 PLATE AS-TIMING

10 1 7N-3216 2 SPACER (35.035X84X12-MM THK)

C 11 1 1A-2029 4 BOLT (3/8-16X1.125-IN)

12 1 8M-9024 4 WASHER-HARD (10.2X22.5X5-MM THK)

13 1 250-3444 1 FILM-INFORMATION (STANDARD ROTATION)

14 1 310-2131 1 FILM-INFORMATION (ROTATION, FIRING ORDER)

C - CHANGE FROM PREVIOUS TYPE

R - REMANUFACTURED PART MAY BE AVAILABLE

GRAPHIC #1 <END> g06110312

10 BASIC ENGINE 1 of 1 SEBP4026-22

263-3894 COUPLING GP-GENERATOR

PART OF 262-1014, 263-9106 GENERAL AR

SMCS-4456 i04688491

NOTE

REF

NO

GRAPHIC

REF PART NUMBER QTY

PART NAME

1 2 3 4 5 6 (PRODUCT LEVEL)

SEE

PAGE

1 1 263-3893 1 COUPLING

2 1 5D-9514 12 BOLT (5/8-11X6.25-IN)

3 1 5N-8539 1 KEY

4 1 5P-8247 12 WASHER-HARD (17X32X3.5-MM THK)

GRAPHIC #1 <END> g01135680

SEBP4026-22 1 of 2 BASIC ENGINE 11

281-2696 COVER GP-CYLINDER BLOCK–CENTRAL STRUCTURE

SMCS-1201 i06914624

NOTE

REF

NO

GRAPHIC

REF PART NUMBER QTY

PART NAME

1 2 3 4 5 6 (PRODUCT LEVEL)

SEE

PAGE

1 1 1N-2914 10 COVER-CYLINDER BLOCK SIDE

2 1 2W-0752 1 GASKET

3 1 4W-5015 1 COVER

4 1 7N-3298 2 COVER-BLOCK

5 1 7N-4945 2 GASKET

6 1 8N-9992 10 COVER-CAMSHAFT

7 1 8N-9993 2 COVER-CAMSHAFT

8 1 117-0066 1 BRACKET-MOUNTING

9 1 272-0758 12 SEAL

10 1 272-0759 12 SEAL

11 1 373-6713 2 COVER

12 1 0S-1588 4 BOLT (3/8-16X1.25-IN)

13 1 0S-1594 8 BOLT (3/8-16X1-IN)

14 1 0S-1595 4 BOLT (1/2-13X1.25-IN)

15 1 1A-2029 72 BOLT (3/8-16X1.125-IN)

16 1 214-7568 2 SEAL-O-RING

17 1 5M-2894 124 WASHER-HARD (10.2X18.5X2.5-MM THK)

18 1 5P-8245 4 WASHER-HARD (13.5X25.5X3-MM THK)

19 1 9S-8004 2 PLUG (9/16-18-THD)

20 1 9X-8872 48 BOLT-LOCKING (3/8-16X0.875-IN)

12 BASIC ENGINE 2 of 2 SEBP4026-22

281-2696 COVER GP-CYLINDER BLOCK (contd.) i06914624

GRAPHIC #1 <END> g06166483

SEBP4026-22 1 of 2 BASIC ENGINE 13

4W-1529 COVER GP-FLYWHEEL HOUSING

SMCS-1157 i07072362

NOTE

REF

NO

GRAPHIC

REF PART NUMBER QTY

PART NAME

1 2 3 4 5 6 (PRODUCT LEVEL)

SEE

PAGE

1 1 4N-1114 3 COVER

2 1 4H-7869 3 GASKET

3 1 4B-4043 9 BOLT (5/8-11X1.375-IN)

4 1 5P-8247 9 WASHER-HARD (17X32X3.5-MM THK)

5 1 8T-6761 1 PLUG-PIPE (1-11-1/2 NPT THD)

7 1 0S-1594 16 BOLT (3/8-16X1-IN)

8 1 5M-2894 21 WASHER-HARD (10.2X18.5X2.5-MM THK)

9 1 2P-2772 2 COVER

10 1 234-8937 2 SEAL-INTEGRAL

11 1 0L-1352 2 BOLT (3/8-16X3.25-IN)

12 1 7N-4319 2 COVER

13 1 7N-4320 2 GASKET

14 1 165-3929 3 BOLT (3/8-16X1.5-IN)

15 1 8T-6765 2 PLUG-PIPE (1/4-18-THD)

B 16 1 5F-0304 3 PLUG

B 17 1 4B-8407 4 GASKET-COPPER

22 1 5F-0304 1 PLUG

23 1 4B-8407 3 GASKET-COPPER

B 24 1 0S-1594 1 BOLT (3/8-16X1-IN)

B 25 1 5M-2894 1 WASHER-HARD (10.2X18.5X2.5-MM THK)

B 30 1 8T-6765 1 PLUG-PIPE (1/4-18-THD)

31 1 104-4767 2 ADAPTER

B 32 1 104-4767 1 ADAPTER

B 33 1 3K-0360 3 SEAL-O-RING

B 34 1 9S-4185 3 PLUG (3/4-16-THD)

B - USE AS REQUIRED

14 BASIC ENGINE 2 of 2 SEBP4026-22

4W-1529 COVER GP-FLYWHEEL HOUSING (contd.) i07072362

GRAPHIC #1 <END> g06215941

SEBP4026-22 1 of 1 BASIC ENGINE 15

107-0278 COVER GP-FRONT HOUSING

SMCS-1151, 1166 i07034098

NOTE

REF

NO

GRAPHIC

REF PART NUMBER QTY

PART NAME

1 2 3 4 5 6 (PRODUCT LEVEL)

SEE

PAGE

1 1 7N-4951 2 COVER

2 1 235-3546 2 SEAL-O-RING

3 1 6V-3348 2 SEAL-O-RING

4 1 1A-2029 27 BOLT (3/8-16X1.125-IN)

5 1 5M-2894 27 WASHER-HARD (10.2X18.5X2.5-MM THK)

6 1 7N-4952 2 COVER

7 1 259-4598 2 SEAL-O-RING

8 1 5P-0840 2 SEAL-O-RING

9 1 3P-1896 2 PLUG-CUP

10 1 2W-5285 1 COVER

11 1 8N-9885 1 GASKET-COVER

GRAPHIC #1 <END> g01173129

16 BASIC ENGINE 1 of 1 SEBP4026-22

101-0831 COVER GP-VALVE MECHANISM

SMCS-1107 i05854205

NOTE

REF

NO

GRAPHIC

REF PART NUMBER QTY

PART NAME

1 2 3 4 5 6 (PRODUCT LEVEL)

SEE

PAGE

1 1 101-4197 1 COVER

2 1 1A-9579 3 BOLT (5/16-18X1.5-IN)

3 1 9M-1974 3 WASHER-HARD (8.8X16X2-MM THK)

4 1 272-0760 1 SEAL-VALVE COVER (BASE)

B 5 1 1A-9579 1 BOLT (5/16-18X1.5-IN)

B 6 1 9M-1974 1 WASHER-HARD (8.8X16X2-MM THK)

GRAPHIC #1 <END> g00773092

SEBP4026-22 1 of 1 BASIC ENGINE 17

8N-7103 CRANKSHAFT GP

SMCS-1202 i02730783

NOTE

REF

NO

GRAPHIC

REF PART NUMBER QTY

PART NAME

1 2 3 4 5 6 (PRODUCT LEVEL)

SEE

PAGE

R 1 1 128-6786 1 CRANKSHAFT AS

1 7N-2003 24 DOWEL

2 1 128-4845 36 BOLT AS

3 1 2W-2288 6 PLUG

CJ 4 1 149-6031 7 BEARING AS-MAIN (STANDARD)

ABC 1 149-6032 BEARING-MAIN (0.63-MM US)

ABC 1 149-6033 BEARING-MAIN (1.27-MM US)

ABC 1 149-6034 BEARING-MAIN (0.63-MM OS)

ABC 1 149-6035 BEARING-MAIN (0.63-MM OS, 0.63-MM US)

J 5 1 7C-6209 2 PLATE-THRUST

AVAILABLE REPAIR KIT(S):

J 196-9530 KIT-BASIC ENGINE REPAIR (MAIN BEARING)

(INCLUDES THRUST PLATES & MAIN BEARINGS)

A - NOT PART OF THIS GROUP

B - USE AS REQUIRED

C - CHANGE FROM PREVIOUS TYPE

J - KIT MARKED J INCLUDES PART(S) MARKED J

GRAPHIC #1 <END> g00358114

18 BASIC ENGINE 1 of 1 SEBP4026-22

100-8026 CYLINDER BLOCK AS

S/N: NSC1-12

FIELD REPLACEMENT ORDER 115-5154–PAGE: 22

PART OF 240-6651 CYLINDER BLOCK GP

SMCS-1201 i02554263

NOTE

REF

NO

GRAPHIC

REF PART NUMBER QTY

PART NAME

1 2 3 4 5 6 (PRODUCT LEVEL)

SEE

PAGE

2 1 5P-8249 28 WASHER-HARD (24X41.5X4-MM THK)

3 1 7X-7925 28 BOLT (7/8-14X11-IN)

4 1 223-1696 7 CAP-CRANKSHAFT BEARING

5 1 4W-4813 3 PLUG

6 1 8T-2929 3 SEAL-O-RING

7 1 8T-2928 3 SEAL-O-RING

8 1 211-7826 12 LINER-CYLINDER BLOCK

9 1 7N-2046 36 SEAL-O-RING

10 1 8N-4707 12 BAND-FILLER

GRAPHIC #1 <END> g00913079

SEBP4026-22 1 of 1 BASIC ENGINE 19

106-2779 CYLINDER BLOCK AS

PART OF 115-5154 CYLINDER BLOCK GP

SMCS-1201 i02478951

NOTE

REF

NO

GRAPHIC

REF PART NUMBER QTY

PART NAME

1 2 3 4 5 6 (PRODUCT LEVEL)

SEE

PAGE

2 1 5P-8249 28 WASHER-HARD (24X41.5X4-MM THK)

3 1 7X-7925 28 BOLT (7/8-14X11-IN)

4 1 223-1696 7 CAP-CRANKSHAFT BEARING

5 1 4W-4813 3 PLUG

6 1 8T-2928 3 SEAL-O-RING

7 1 8T-2929 3 SEAL-O-RING

GRAPHIC #1 <END> g01266119

20 BASIC ENGINE 1 of 1 SEBP4026-22

350-1392 CYLINDER BLOCK AS

S/N: NSC13-UP

PART OF 353-3970 CYLINDER BLOCK GP

SMCS-1201 i03810951

NOTE

REF

NO

GRAPHIC

REF PART NUMBER QTY

PART NAME

1 2 3 4 5 6 (PRODUCT LEVEL)

SEE

PAGE

1 1 223-1696 7 CAP-CRANKSHAFT…