AMENDMENT 70Z08025QMECP00300002.pdf

Offers must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended, by one of the following methods:

(a) By completing items 8 and 15, and returning or (c) By separate letter or electronic communication which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE

RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted, such change may be made by letter or electronic communication, provided each letter or electronic communication makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

E. IMPORTANT: Contractor is not is required to sign this document and return copies to the issuing office.

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT

1. CONTRACT ID CODE

2. AMENDMENT/MODIFICATION NUMBER 3. EFFECTIVE DATE 4. REQUISITION/PURCHASE REQUISITION NUMBER 5. PROJECT NUMBER (If applicable)

7. ADMINISTERED BY (If other than Item 6) CODE

STANDARD FORM 30 (REV. 11/2016)

Prescribed by GSA FAR (48 CFR) 53.243

FACILITY CODE

9A. AMENDMENT OF SOLICITATION NUMBER

9B. DATED (SEE ITEM 11)

10A. MODIFICATION OF CONTRACT/ORDER NUMBER

10B. DATED (SEE ITEM 13)

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

The above numbered solicitation is amended as set forth in Item 14. The hour and date specified for receipt of Offers is extended. is not extended.

12. ACCOUNTING AND APPROPRIATION DATA (If required) copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted;

13. THIS ITEM APPLIES ONLY TO MODIFICATIONS OF CONTRACTS/ORDERS.

IT MODIFIES THE CONTRACT/ORDER NUMBER AS DESCRIBED IN ITEM 14.

CHECK ONE A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE CONTRACT ORDER

NUMBER IN ITEM 10A.

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, appropriation data, etc.) SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103(b).

C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

D. OTHER (Specify type of modification and authority)

Except as provided herein, all terms and conditions of the document referenced in Item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

15C. DATE SIGNED

15A. NAME AND TITLE OF SIGNER (Type or print)

16C. DATE SIGNED

16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

PAGE OF PAGES

6. ISSUED BY CODE

8. NAME AND ADDRESS OF CONTRACTOR (Number, street, county, State and ZIP Code) (X)

CODE

15B. CONTRACTOR/OFFEROR

(Signature of person authorized to sign)

16B. UNITED STATES OF AMERICA

(Signature of Contracting Officer)

Previous edition unusable

70Z08025QMECP00300002

Summary of Changes

Section IV: List of Documents, Exhibits, and other Attachments

Amendment specific attachments:

File Attachments:

Title Description File Name Entity Reference

AMENDMENT

70Z08025QME

CP00300002

AMENDMENT

70Z08025QMECP00300002

.pdf

Header

AMENDMENT 70Z08025QMECP00300002

CGC RESOLUTE FY26 DS

Q1. I’ve noticed some discrepancies in the specification for USCGC RESOLUTE FY26 DS2, NOTICE ID#70Z08025QMECP0030. Please see the following examples:

ITEM#2 skipped paragraph 3.7 ITEM# 20 repeat paragraph 3.4 Surface preparation & 3.4 Touch-up preservation ITEM#21 repeat paragraph 3.3 Surface preparation & 3.3 In-process quality control Some are the same paragraph number but a different work item. Please advise.

A1. WI 2: Technical error caused 3.7 to be numbered 3.8. There is not an additional 3.7.

WI 20: Technical error with numbering created a duplicate 3.4 “Touch-up preservation”.

This should be addressed as 3.7 by the contractor.

WI 21: Same numbering issue as above, the duplicate 3.3 “In-process quality control” should be numbered 3.4 and should be addressed as 3.4 by the contractor.

Q2. Regarding Work Item 25, is it possible to repair what is already in place?

A2. Paragraph 3.2.2 allows re-using castings pending inspections, avoiding the need to use a foundry. KTRs should not be trying to cast entire assemblies. Repairs via doubler plates or inserts are acceptable, provided they don’t interfere with chain movement. KTR’s will need to conduct and submit UT surveys of the components along with proposed repairs for CG review.