Solicitation_Amendment_0006_continuation.pdf

Question No.

CUTTER & HULL Number: USCGC TAHOMA (WMEC-908)

RFQ Number: 70Z08018QP45F7600

SOLICITATION SECTION: SPECIFICATION PARA NO.

DEFINITE/OPTIONAL ITEM NO. D-042 PARA NO. 3.2

TITLE:

Watertight Hatches (Internal DC and Below), Renew (CSMP – 20170031)

QUESTION:

Work specification requires removal of hatch coaming.

Is a new coaming required to be installed? If so, is a new coaming provided by the Government?

Answer :

Yes a new coaming will be provided by the Government

DEFINITE/OPTIONAL ITEM NO. D-042 PARA NO. 3.2

TITLE:

Watertight Hatches (Internal DC and Below), Renew (CSMP – 20170031)

Work item as written requires relocation, adjust, fabricate and install new securing latches to the closure or ship's structure at the direction of the Coast Guard Inspector.

If new securing latches are required to be fabricated and installed will the contractor receive a change order for the fabrication/installation? If not, please identify the reference drawing/s and construction/installation details for the required securing latches.

Answer :

If a new securing latch is required to be fabricated and installed, it will be handle per Change Request.

DEFINITE/OPTIONAL ITEM NO. D-044 PARA NO. 3.3.1

TITLE:

Bilges, Preserve

Question No. 4:

How many square feet of tank top centerline from frame 82 to frame 98 are to receive surface prep and coating?

Paragraph 3.3.1 also includes the statements "6 inches up all adjacent vertical surfaces within defined area" and "Equipment foundations within defined area".

"Defined area" is not clearly defined. Please define the forward/aft, inboard/outboard, and vertical limits of the area to be surface prepared and coated.

Please provide these four (4) references.

Answer:

225 Square feet of tank top centerline from frame 82 to frame 98.

Defined area is defined by Frame 82 to Frame 87, outboard of stringer 9 port up to 12 inches above deck plate level, as well as all Equipment foundations found in that area.

Question No. 5:

CUTTER & HULL Number: USCGC TAHOMA WMEC-908

SOLICITATION SECTION: PARA NO.

DEFINITE/OPTIONAL ITEM NO. 31 PARA NO. 3.8

Dry Dock

Paragraph 3.8 of Work item 31 tasks the contractor to “fleet” the vessel and submit a second alternate blocking plan. Previous docking availabilities of vessels of this class designated a blocking position and did not require fleeting of the vessel. Please verify that fleeting is the requirement the government is seeking in this case.

Fleeting is not required

Question No. 6:

CUTTER & HULL Number: USCGC TAHOMA WMEC-908

SOLICITATION SECTION: PARA NO.

DEFINITE/OPTIONAL ITEM NO. 32 PARA NO. 3.2

Temporary Services, Provide

Paragraph 3.2 of Work Item 32, sub-paragraph 3.3.4 (which reflects the requirement listed in SFLC Std Spec

8635) does not include the number of male and female duty section members that the contractor is to provide berthing for. Please provide these numbers.

9 Male 5 Female