Justification and Approval for Other Than Full and Open Competition.pdf

Last Updated 11/01/24

U.S. COAST GUARD JUSTIFICATION FOR OTHER THAN FULL AND OPEN COMPETITION

SIMPLIFIED ACQUISITION PROCEDURES (SAP) FOR FAR 13.106-1(b)

PURCHASE REQUEST OR REQUISITION NUMBER:

4332-GM05

ESTIMATED TOTAL VALUE, INCLUDING OPTIONS:

(Over Micro-Purchase Threshold, but up to the SAT)

AUTHORITY JUSTIFICATION TYPE

☒ 13.106-1(b)(1) ONLY ONE SOURCE REASONABLY AVAILABLE (e.g., urgency, exclusive licensing agreements, or industrial mobilization).

☐ FAR 5.102(a)(6), FAR

11.105, FAR 13.106-1

(b) (1)

BRAND NAME – Items peculiar to one manufacturer: The particular brand name, product, or feature is essential to the Government’s requirements, and market research indicates other companies’ similar products, or products lacking the particular feature, do not meet, or cannot be modified to meet, the agency’s needs.

BRIEF DESCRIPTION OF SUPPLIES OR SERVICES REQUIRED AND THE INTENDED USE:

The United States Coast Guard (USCG) requires the evaluation and calibration (E&C) of the Test Sets listed in the following table. Based on the results of the E&C, additional repairs may be required to return the Test Set(s) to serviceable condition. The USCG intends to procure these services on a sole source basis directly from the Original Equipment Manufacturer (OEM), Safran Electronics & Defense, Avionics USA, LLC (CAGE Code: 003T0), hereinafter referred to as Safran.

The USCG intends to include an addendum to FAR 52.212-4 in the resultant purchase order. IAW this addendum, the USCG may require the E&C of additional units up to maximum optional quantity specified in the following table at the same price, terms, and conditions as specified in the original purchase order. The Contractor shall quote any repairs identified during the evaluation separately for approval and funding by the Contracting Officer. The Contracting Officer may exercise this option by written notice to the Contractor through one year after date of award or another mutually agreed upon date.

Nomenclature Part Number (PN) Initial Quantity Optional Quantity

Actuator and Trim/Feel Test Set 418-65037-004 4 each 10 each

These test sets are used to perform test and set-up for maintenance and installation of the MH-65 series Actuators and Trim/Feel units, both flight critical safety items.

SUGGESTED SOURCE NAME, ADDRESS, & UNIQUE ENTITY IDENTIFIER (UEI):

Safran Electronics & Defense, Avionics USA. LLC (CAGE Code: 003T0)

2802 Safran Drive

Grand Prairie, TX 75052-8187

UEI: L932KNSD62E6

RATIONALE FOR JUSTIFICATION TYPE SELECTED ABOVE TO INCLUDE RELEVANT INFORMATION GAINED

THROUGH YOUR MARKET RESEARCH TO SUPPORT THE JUSTIFICATION TYPE:

The original OEM of these Test Sets is Sagem Avionics which is now part of Safran. This test equipment was specifically designed for use on the MH-65 helicopters in partnership with the helicopter’s OEM, Airbus Helicopters, Inc. This is the only test equipment capable of ensuring the continued airworthiness of the MH-65 helicopter and is approved for use by the USCG’s Aircraft Configuration Control

Board (ACCB).

Market research has revealed that Safran is the only authorized repair provider for these test sets. Safran owns all rights to the service manuals, technical data, performance specifications, and drawings required to perform evaluation, calibration, and repair work on these

Test Sets. The proprietary rights to the technical data necessary to have this equipment serviced by other than the OEM are not owned by the Government nor are they licensed to any commercial sources.

These services are not available from any mandatory Government source IAW FAR 8.002 or from any non-mandatory source IAW FAR

8.004. Safran does not have any other authorized repair facilities. A combined synopsis/solicitation will be posted to the Contract Opportunities section of the web site at www.sam.gov. All responsible sources may submit a capability statement, proposal, or quotation which shall be considered by the agency.

https://www.acquisition.gov/far/13.106-1 https://www.acquisition.gov/far/5.102 https://www.acquisition.gov/far/11.105 https://www.acquisition.gov/far/11.105 https://www.acquisition.gov/far/13.106-1 https://www.acquisition.gov/far/13.106-1 http://www.sam.gov/

Last Updated 11/01/24

CONTRACTING OFFICER - FAIR AND REASONABLE PRICE DETERMINATION METHODS:

☐ MARKET RESEARCH

☒ COMPARISON OF PROPOSED PRICE WITH PRICES FOUND REASONABLE ON PREVIOUS PURCHASES

☐ CURRENT PRICE LIST

☒ COMPARISON WITH SIMILAR ITEMS IN A RELATED INDUSTRY

☐ COMPARISON TO IGCE

CONTRACTING OFFICER’S PERSONAL KNOWLEDGE (EXPLAIN)

☐ OTHER (EXPLAIN)

SIGNATURE AND TITLE OF TECHNICAL AND REQUIREMENTS POC

DATE

SIGNATURE OF CONTRACTING OFFICER

DATE