Attachment 6 - Questions and Answers - 70Z03822QJ0000103.pdf

ATTACHMENT 6 – 70Z03822QJ0000103

Question and Answers Document for Aircraft Cradles:

1. Specify radius of each curved cut? Each curved cut for all steel angles has an APPROXIMATE

1” radius.

2. The drawing does not call out a paint or surface treatment specification. Are these units to be provided as-is, bare metal? Any gloss yellow paint which provides corrosion protection for the steel frame is acceptable.

3. What is the material thickness (Angle: 3 x 3 x?, Square Tube: 1 x 1x?, Steel tow plate (5 x

7.25 x?) ? Steel material thickness is all .250”, except for the tow plate, which is .500”

4. What is the caster load rating? These specific castors are required and available from Clark

Caster. The part number is 6660-01-PLX-TLB, which is a solid polyurethane, top lock brake swivel caster, with a load capacity of 900lbs. They were designed specifically for our application.

5. What is the radius shape at the top of each pedestal? The radius shape at the top of each pedestal is for the top of each plywood pedestal. The pedestal is shown in the drawings.

6. What is the fastener size/qty (fasten plywood together, felt retention)? Fasteners size and spacing shall be at the discretion of the contractor. Fasteners shall be sized and spaced in a manner sufficient to secure the felt to the plywood. Fasteners shall be on the sides of the pedestals only, and none on top surface, so absolutely no sharp objects contact aircraft hull.

7. Can you provide a complete picture of the aircraft cradles? Yes, please see Attachment 7