PWS_22_MAR_19.docx

USCG Air Station Sacramento Attachment A_PWS_02FEB19 Bird Netting Project

70Z0319QLAS02101

PERFORMANCE WORK STATEMENT

FURNISH AND INSTALL BIRD NETTING DEVICES FOR USCG AIR STATION SACRAMENTO MAIN HANGER 22 March 19

1.0 SCOPE: The contractor shall provide all management, tools, equipment, and labor necessary to inspect/repair/replace bird netting, remove all birds (alive/dead), furnish/install access zippers and bird spikes in USCG Air Station Sacramento Main Hangar as required.

1. PERIOD OF PERFORMANCE: Work must be performed within 4 calendar weeks of receipt once coordination with contractors is scheduled. Work will be accomplished in Hangar BLDG 1106, USCG Air Station Sacramento, McClellan, CA, 95652.

1) PRINCIPLE FEATURES: The work to be accomplished consists, in general, of the following principle items. This does not mean the work consists only of these items, but that it consists of these principle items along with all incidental minor work which becomes necessary to complete in order to accomplish the overall project in satisfactory and workman like manner meeting the approval of the customer.

The priorities of the USCG are as follows; 1) to discourage and prevent birds from accessing the Main Hangar Rafter Area, and 2) to USCG members maintenance access to ceiling mounted equipment (lights, AC units and safety equipment).

1.1. The contractor shall provide all labor, material and supervision to repair and replace approximately 17,000 square feet of existing bird netting with Bird Barrier Heavy Duty black netting or equal in the interior of Main Hanger (BLDG 1106). The netting shall be stitched and hung taut without sagging to prevent movement

1.2. The contractor shall install non-corrosive hardware powder actuated stainless steel I beam clips with Hilti Shot. The contractor shall NOT use hog-ring hardware.

1.3. Bird netting shall be secured above the lights when possible to allow maintenance access. The contractor shall furnish/install access zippers in bird netting in the interior of Main Hanger (BLDG 1106) for facility maintenance to all electrical/mechanical equipment made inaccessible by netting.

1.4. The contractor will remove all birds (living or dead) and remove/dispose of pest waste as per OSHA/CA regulations.

1.5. The contractor shall furnish/install bird spikes for life line beam area of 650’ (apx.) and additional open beam areas as needed.

1.6. The Contractor shall

1.7. The contractor shall furnish a 60’ aerial lift (sizer or similar) with a boom lift of 80’ to access hanger overhead.

2. GENERAL: All work shall be performed in accordance with the manufacturer's installation specifications and procedures for each type of work required. When work is not covered by specifications, said work shall be performed in accordance with the manufacturer’s "written" specifications, installation instructions, performance procedures and (NEC) National Electrical Code, (NFPA) National Fire Protection Association Fire Code, UFC 3 -550-03N and 3-55-03FA, (UFC) Unified Facility Criteria.

3. SUBMITTALS: Contractor is responsible to provide detailed records of all parts installed and any and all warranty information to the customer.

4. SPECIAL REQUIREMENTS: There is no smoking in or around BLDG 1106.

5. The contractor will assign employees who possess certification to handle all required material handling, transportation, loading, unloading and product installation tasks to meet OSHA and base safety requirements. The contractor will ensure product meets required safety standards at the time the project is finished and accepted by the customer.

6. WARRANTIES: The contractor shall assume and provide the ten-year installation commercial product warranties product warranties.

7. SECURITY REQUIREMENTS. The contractors will comply at all times with base security requirements to include base pass requirements and personnel security clearance.

8. AIR STATION AND LOCAL REGULATIONS:

9.1 The work site is on Government property. All rules and regulations issued by the Commanding Officer covering safety, vehicle operation, and sanitation must be observed by the Contractor and his employees at all times.

9.2 All personnel employed on site shall keep within the limits of the work, and shall not enter any restricted area unless required or escort by a unit member. The Contractor’s equipment shall be clearly marked for identification.

9.3 Contractor personnel shall present a neat and clean appearance and be easily recognized as contractor employees. The contractor shall provide contractor personnel working at USCG Air Station Sacramento with a method of identifying the company name, employee’s first and last name, and job title. This may be accomplished by a name badge or a company shirt. Employees must wear identification at all times.

9.4 The Contractor shall control its employee’s traffic on site. Parking for workers shall be at a suitable location as directed by the Technical POC.

9.5 The Contractor shall coordinate work with the technical POC to minimize any disruption to normal unit operations.

9. DAMAGE TO GOVERNMENT PROPERTY:

10.1 Any damage caused to Government or private property shall be corrected at the Contractor’s expense.

11. SAFETY AND SECURITY:

11.1 The Contractor shall provide all necessary safety equipment to protect the work site area. All work shall be performed in accordance with O.S.H.A. Safety standards to prevent injury to by-passers or workforce.

11.2 Contractor shall comply with Federal and State of California safety and health regulations. When standards differ, the more stringent shall apply. All accidents and property damage shall be reported to the Technical POC.

11.3 The Contractor shall be responsible for the security of their material, tools and equipment. The Government shall not be responsible for their loss.

11.4 The Contractor shall comply with all rules and regulations issued by the National Fire Protection Association covering the use and storage of flammable mixtures or material which might constitute a fire hazard.

END PWS

PHOTOS