SOW.docx
DOCX document 14 KB Posted
- Attached to
- USCG IPF New Orleans Electrical Switch
- Solicitation number
- 70Z02926QNEWO6056A
About this file
This is a Statement of Work (SOW) for the procurement of electrical equipment by the U.S. Coast Guard Industrial Production Facility (IPF) New Orleans. The vendor is required to provide one MaxGard Interlocked Receptacle with Circuit Breaker and Auxiliary Switch, specified with the following technical requirements: 200 Amp capacity, 3 Pole 4 Wire configuration, 3 Phase 480V, 60Hz operation, and manufacturer part number DBRS24042000S produced by Russellstoll. The SOW explicitly states that no substitutions will be allowed for this equipment. An additional specification requires installation of a threaded 2-1/2" entrance hole on the top of the box, with further details available upon request.
This is a Request for Quotation (RFQ) solicitation numbered 70Z02926QNEWO6056A, set aside for Total Small Business with the applicable NAICS code 423610. Award will be made to the quoter offering the lowest price on a Firm-Fixed Price basis. Offerors must be actively registered in the System for Award Management (SAM) prior to submission. The Department of Homeland Security, U.S. Coast Guard is the procuring agency. FAR and HSAR clauses applicable to supplies are incorporated, with modifications made to align terminology with quotation requirements rather than offer terminology per FAR Part 13.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Spec Sheet 2.docx | DOCX document | |
| SF18.pdf | ||
| Specification Sheet.pdf | ||
| Fixed Price Supply FAR - HSAR Clauses.docx | DOCX document |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Vendor will provide a MaxGard Interlocked Receptacle with Circuit Breaker and Auxiliary Switch 200 Amp, 3 Pole 4 Wire, 3 Phase 480V, 60Hz. Manufacturer part number: DBRS24042000S.
No substitutions will be allowed.
A threaded 2-1/2" entrance hole is requested to be installed on the top of the box.
Additional information is provided upon request.
File details come from the government source that posted it. Updated .