9mm PCC RFI QsAs 4.3.25.xlsx
XLSX spreadsheet 21 KB Posted
- Attached to
- 9mm Pistol Caliber Carbine
- Solicitation number
- 70US0925R70092838
About this file
This document is a Request for Information (RFI) Questions and Answers spreadsheet for a 9mm Pistol Caliber Carbine solicitation by the US Secret Service (USSS). The RFI addresses specific technical requirements for the weapon system, including critical details about magazine compatibility and trigger configuration. Key specifications include a mandatory requirement for GLOCK 17/34/45 17-round and GLOCK 19 15-round magazine compatibility, with no alternative magazine options permitted. Regarding trigger mechanisms, the USSS clarified that only two-stage triggers are acceptable, explicitly rejecting single-stage triggers, while allowing two-stage triggers from alternative vendors. The solicitation (Number 70US0925R70092838) is currently in the pre-solicitation phase, indicating the government is gathering market research and vendor insights before formal proposal requests are issued.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| 9mm PCC RFI QsAs.xlsx | XLSX spreadsheet | |
| SOW - 9mm Pistol Caliber Carbine.docx | DOCX document | |
| Request for Information - 9mm Pistol Caliber Carbine.docx | DOCX document |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Sheet1
| 9mm Pistol Caliber Carbine | ||
| RFI Questions & Answers | ||
| Vendor's Question | USSS Responses | |
| SOW Section 2.2.10 Magazine Well / Magazine Release. The weapon magazine well shall be compatible with the GLOCK 17/34/45 17-rd Magazine (OEM Part # 47617) GLOCK 19 15-rd Magazine (OEM Part #47618) | ||
| a. | Question: Will the Glock magazine compatibility be a mandatory requirement on the pending RFP or will other magazine options be considered/permitted? | OEM Glock magazine compatibility is a mandatory requirement. No other options will be considered. |
| Under section 2.2.7.1 it says, "The trigger configuration shall be two-stage with no adjustment screws or set screws." |
Question 1: Would a single stage trigger be acceptable as well?
Question 2: Would another vendor's two stage trigger provided in our lower be acceptable? 1. A single stage trigger will not be accepted.
2. Another vendor's two stage triiger would be acceptable.
File details come from the government source that posted it. Updated .