70LGLY22QSSB00022 Amend 3.pdf

(x)

70LGLY22QSSB00022

x x

1 copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted ; or (c) By separate letter or telegram which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGEMENT TO BE RECEIVED AT

THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted , such change may be made by telegram or letter, provided each telegram or letter makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

x

GLYNCO GA 31524

70LGLY

ATTN: Lynda Bush

1131 CHAPEL CROSSING RD

FEDERAL LAW ENFORCEMENT TRAINING CENTERS

DEPARTMENT OF HOMELAND SECURITY

08/01/20220003

13. THIS ITEM ONLY APPLIES TO MODIFICATION OF CONTRACTS/ORDERS. IT MODIFIES THE CONTRACT/ORDER NO. AS DESCRIBED IN ITEM 14.

12. ACCOUNTING AND APPROPRIATION DATA (If required) is not extended.is extended, Items 8 and 15, and returning

Offers must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended , by one of the following methods: (a) By completing

The above numbered solicitation is amended as set forth in Item 14. The hour and date specified for receipt of Offers

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

FACILITY CODE CODE

10B. DATED (SEE ITEM 13)

10A. MODIFICATION OF CONTRACT/ORDER NO.

9B. DATED (SEE ITEM 11)

9A. AMENDMENT OF SOLICITATION NO.

CODE

8. NAME AND ADDRESS OF CONTRACTOR (No., street, county, State and ZIP Code)

7. ADMINISTERED BY (If other than Item 6)CODE 6. ISSUED BY

PAGE OF PAGES

4. REQUISITION/PURCHASE REQ. NO.3. EFFECTIVE DATE2. AMENDMENT/MODIFICATION NO. 5. PROJECT NO. (If applicable)

1. CONTRACT ID CODE

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT

06/17/2022

CHECK ONE A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE CONTRACT

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

D. OTHER (Specify type of modification and authority) appropriation date, etc.) SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103(b).

E. IMPORTANT: Contractor is not, is required to sign this document and return __________________ copies to the issuing office.

ORDER NO. IN ITEM 10A.

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

2022 FLETC OPERATIONS AND SUPPORT 70 0509

The purpose of this amendment is to respond to additional questions. The closing date remains August 4, 2022 at 1:00 pm.

16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)15A. NAME AND TITLE OF SIGNER (Type or print)

15C. DATE SIGNED 16B. UNITED STATES OF AMERICA 15B. CONTRACTOR/OFFEROR 16C. DATE SIGNED

(Signature of person authorized to sign) (Signature of Contracting Officer)

Lynda A. Bush

STANDARD FORM 30 (REV. 10-83)

Prescribed by GSA

FAR (48 CFR) 53.243

NSN 7540-01-152-8070

Previous edition unusable

Except as provided herein, all terms and conditions of the document referenced in Item 9 A or 10A, as heretofore changed, remains unchanged and in full force and effect .

TEL: EMAIL: 912-267-3128 lynda.a.bush@fletc.dhs.gov

1. In the bid you state LC-type fiber connectors in 4.1.6 and 5.8, but SC were mentioned during our site visit and it’s stated in the amendment answers (#3) that you’re requesting 12-port high-density modules, which are typically SC. Which type do you require? SC

2. Will Corning be a suitable replacement for Superior? Yes as long as the modules fit properly in the patch panel box

3. Section 5.4 and 5.5 state both fiber panels will be rack-mounted. Is 4.1.9, wall-mounted fiber panel, still requested? No, They should be rack mounted.

4. Section 5.3 states three 3” 3-cell Maxcells in one conduit. Is this accurate or, based on the total amount of Maxcell requested in 4.1.5, do you want to split the 16,000ft between the two conduits? Split between two conduits

5. Provide new verified pathways.

6. Confirm that bollards will be required during manholes only within perimeter fencing of main training ground. Out in the desert no bollards shall be needed, please confirm. That is correct

7. Confirm Fiber markers are required. That is correct

8. Provide utility locates and depths. There is existing electrical service right by the shooting range and new service (recently trenched) out on the desert. The electrical cabling is at 48”. The new fiber duct bank should be installed at 36”

9. Will any bonding be required on this project. Bonding? Please clarify

10. Confirm that handholes shall be the smaller concrete HH’s not the 4’x4’. The handholes should be traffic rated concrete 2’x 4’

11. Confirm that bottom handholes will require gravel to let rainwater flow into the ground. This is correct