70LART26QPFB00008 Combined Synopsis Solicitation.pdf

This is a combined synopsis/solicitation for commercial products or commercial services prepared in accordance with Federal Acquisition Regulation (FAR) Part 12 under the Revolutionary FAR Overhaul (RFO) and has incorporated provisions and clauses that are in effect through Federal Acquisition Circular (FAC) 2026-01 dated 03/13/2026. This announcement constitutes the only solicitation; quotations are being requested and a written solicitation will not be issued.

The solicitation number 70LART26QPFB00008 is issued as a Request for Quotation (RFQ) to provide Tactical Training Walls for the Department of Homeland Security (DHS), Federal Law Enforcement Training Center (FLETC), located in Artesia, New Mexico.

The associated North American Industrial Classification System (NAICS) code for this procurement is 321992. This requirement is a Total Small Business Set-Aside and only qualified offerors may submit quotes.

Schedule of Pricing/Line Item:

CLIN Description Qty Unit Unit

Price Total Price

0001 Tactical Training Walls – complete supply package including wall panels, door units, spacer posts, connector hardware, finishing materials, and technical documentation.

Shipping included

1 LOT

Statement of Work/Specifications:

See Attachment 1

Delivery/Performance:

94 Gunpowder Rd, Artesia, NM 88210

• Shipping shall not separately be priced (NSP). Shipping Cost shall be included in the cost of each CLIN.

Instructions to Offerors:

In response to this combined notice, vendors will be required to submit the following information on company letterhead or business stationary directly to the Contracting Officer by the date and time established for receipt of quotes.

Quotations must be submitted electronically via email to the Contracting Officer, Queen Singleton and Contract Specialist, Jacqueline Marquez, at queen.h.singleton@fletc.dhs.gov and Jacqueline.marquez@fletc.dhs.gov no later than 11:00 AM EDT on 04/29/2026.

Quotations must include:

1. RFQ Number 70LART26QPFB00008

2. Price proposal utilizing Schedule of Pricing CLIN

3. Technical proposal or description of items offered

4. Unique Entity Identification number and CAGE code mailto:queen.h.singleton@fletc.dhs.gov mailto:Jacqueline.marquez@fletc.dhs.gov

See attached solicitation and Attachment 1 for details.

Questions:

All questions regarding this solicitation must be received electronically via email to the Contracting Officer, Queen Singleton and Contract Specialist, Jacqueline Marquez, at queen.h.singleton@fletc.dhs.gov and Jacqueline.marquez@fletc.dhs.gov no later than 3:00 PM EDT on 04/27/2026. All Q&As will be posted as an amendment to the solicitation on SAM.gov.

Evaluation Criteria:

Award will be made to the offeror whose quotation can provide the Lowest Price Technically Acceptable to the Government.

It is anticipated that a single Firm-Fixed-Price award will be made as a result of this solicitation.

Applicable Provisions and Clauses:

This solicitation incorporates provisions and clauses by reference. The full text of provisions and clauses may be accessed electronically at www.acquisition.gov.

mailto:queen.h.singleton@fletc.dhs.gov mailto:Jacqueline.marquez@fletc.dhs.gov http://www.acquisition.gov/

2 - Section 2 4 - Section 4

2 - Section 2

52.202-1 Definitions. (JUN 2020)

52.203-17 Contractor Employee Whistleblower Rights. (NOV 2023)

52.204-7 System for Award Management-Registration. (NOV 2024) (Deviation AUG 2025)

52.204-10 Reporting Executive Compensation and First-Tier Subcontract Awards. (JUN 2020) (Deviation AUG 2025)

52.204-13 System for Award Management-Maintenance. (OCT 2018) (Deviation AUG 2025)

52.204-19 Incorporation by Reference of Representations and Certifications. (DEC 2014)

52.209-2 Prohibition on Contracting With Inverted Domestic Corporations-Representation. (NOV 2015) (Deviation NOV 2025)

52.209-10 Prohibition on Contracting With Inverted Domestic Corporations. (NOV 2015) (Deviation

NOV 2025)

52.209-11 Representation by Corporations Regarding Delinquent Tax Liability or a Felony Conviction under any Federal Law. (FEB 2016) (Deviation NOV 2025)

52.212-1 Instructions to Offerors-Commercial Products and Commercial Services. (SEP 2023) (Deviation AUG 2025)

52.212-4 Terms and Conditions-Commercial Products and Commercial Services. (NOV 2023) (Deviation AUG 2025)

52.219-1 Small Business Program Representations. (FEB 2024) (Deviation OCT 2025)

(a) Definitions. As used in this provision-

Economically disadvantaged women-owned small business (EDWOSB) concern means a small business concern that is at least 51 percent directly and unconditionally owned by, and the management and daily business operations of which are controlled by, one or more women who are citizens of the United States and who are economically disadvantaged in accordance with 13 CFR part 127, and the concern is certified by SBA or an approved third-party certifier in accordance with 13 CFR 127.300. It automatically qualifies as a women-owned small business concern eligible under the WOSB Program.

HUBZone small business concern means a small business concern that meets the requirements described in 13 CFR 126.200, is certified by the Small Business Administration (SBA) and designated by SBA as a HUBZone small business concern in the Small Business Search (SBS) (

13 CFR 126.103).

Service-disabled veteran-owned small business (SDVOSB) concern eligible under the SDVOSB Program means an SDVOSB concern that is designated in the System for Award Management (SAM) as certified by the Small Business Administration (SBA) in accordance with 13 CFR 128.300.

Small business concern-

(1) Means a concern, including its affiliates, that is independently owned and operated, not dominant in its field of operation, and qualified as a small business under the criteria in 13 CFR part 121 and the size standard in paragraph (b) of this provision.

(2) Affiliates, as used in this definition, means business concerns, one of whom directly or indirectly controls or has the power to control the others, or a third party or parties control or have the power to control the others. In determining whether affiliation exists, consideration is given to all appropriate factors including common ownership, common management, and contractual relationships. SBA determines affiliation based on the factors set forth at 13 CFR 121.103.

Small disadvantaged business concern means a small business concern that-

(1) Is at least 51 percent unconditionally and directly owned (as defined at 13 CFR 124.105) by one or more socially disadvantaged (as defined at 13 CFR 124.103) and economically disadvantaged (as defined at 13 CFR 124.104) individuals who are citizens of the United States, and

(2) The management and daily business operations of which are controlled (as defined at 13 CFR 124.106) by individuals who meet the criteria in paragraph (1) of this definition.

Women-owned small business (WOSB) concern eligible under the WOSB Program (in accordance with 13 CFR part 127) means a small business concern that is at least 51 percent directly and unconditionally owned by, and the management and daily business operations of which are controlled by, one or more women who are citizens of the United States, and the concern is certified by SBA or an approved third-party certifier in accordance with 13 CFR 127.300.

(b)(1) The North American Industry Classification System (NAICS) code for this acquisition is [insert NAICS code].

(2) The small business size standard is [insert size standard].

(3) The small business size standard for a concern that submits an offer, other than on a construction or service acquisition, but proposes to furnish an end item that it did not itself manufacture, process, or produce (i.e., nonmanufacturer), is 500 employees, or 150 employees for information technology value-added resellers under NAICS code 541519, if the acquisition-

(i) Is set aside for small business and has a value above the simplified acquisition threshold;

(ii) Uses the HUBZone price evaluation preference regardless of dollar value, unless the offeror waives the price evaluation preference; or

(iii) Is an 8(a), HUBZone, service-disabled veteran-owned, economically disadvantaged women-owned, or women-owned small business set-aside or sole-source award regardless of dollar value.

(c) Representations.(1) The offeror represents as part of its offer that-

(i) it [ ] is, [ ] is not a small business concern; or

(ii) It [ ] is, [ ] is not a small business joint venture that complies with the requirements of 13 CFR 121.103(h) and 13 CFR 125.8(a) and (b). [ The offeror shall enter the name and unique entity identifier of each party to the joint venture: .]

(2) [Complete only if the offeror represented itself as a small business concern in paragraph (c)(1) of this provision.] The offeror represents that it [ ] is, [ ] is not a women-owned small disadvantage business concern.

(3) Women-owned small business (WOSB) joint venture eligible under the WOSB Program. The offeror represents as part of its offer that it [ ] is, [ ] is not a joint venture that complies with the requirements of 13 CFR 127.506(a) through (c). [ The offeror shall enter the name and unique entity identifier of each party to the joint venture: .]

(4) Economically disadvantaged women-owned small business (EDWOSB) joint venture.

The offeror represents as part of its offer that it [ ] is, [ ] is not a joint venture that complies with the requirements of 13 CFR 127.506(a) through (c). [ The offeror shall enter the name and unique entity identifier of each party to the joint venture: .]

(5) SDVOSB joint venture eligible under the SDVOSB Program. [Complete only if the offeror is certified as a SDVOSB concern]. The offeror represents as part of its offer that it [ ] is, [ ] is not a SDVOSB joint venture eligible under the SDVOSB Program that complies with the requirements of 13 CFR 128.402. [ The offeror shall enter the name and unique entity identifier of each party to the joint venture: .]

(6) HUBZone joint venture eligible under the HUBZone Program. [Complete only if the offeror is a HUBZone small business concern.] The offeror represents, as part of its offer, that it [ ] is, [ ] is not a HUBZone joint venture that complies with the requirements of 13 CFR 126.616(a) through (c). [ The offeror shall enter the name and unique entity identifier of each party to the joint venture: .] Each HUBZone small business concern participating in the HUBZone joint venture must be certified as a HUBZone concern.

(d) Notice. Under 15 U.S.C. 645(d), any person who misrepresents a firm's status as a business concern that is small, HUBZone small, small disadvantaged, service-disabled veteran-owned small, economically disadvantaged women-owned small, or women-owned small eligible under the WOSB Program in order to obtain a contract to be awarded under the preference programs established pursuant to section 8, 9, 15, 31, and 36 of the Small Business Act or any other provision of Federal law that specifically references section 8(d) for a definition of program eligibility, will be-

(1) Punished by imposition of fine, imprisonment, or both;

(2) Subject to administrative remedies, including suspension and debarment; and

(3) Ineligible for participation in programs conducted under the authority of the Act.

(End of provision)

52.219-6 Notice of Total Small Business Set-Aside. (NOV 2020) (Deviation OCT 2025)

52.219-28 Postaward Small Business Program Rerepresentation. (JAN 2025) (Deviation OCT 2025)

(a) Definitions. As used in this clause-

Long-term contract means a contract of more than five years in duration, including options.

However, the term does not include contracts that exceed five years in duration because the period of performance has been extended for a cumulative period not to exceed six months under the clause at 52.217-8, Option to Extend Services, or other appropriate authority.

Small business concern-

(1) Means a concern, including its affiliates, that is independently owned and operated, not dominant in its field of operation, and qualified as a small business under the criteria in 13 CFR part 121 and the size standard in paragraph (c) of this clause.

(2) Affiliates, as used in this definition, means business concerns, one of whom directly or indirectly controls or has the power to control the others, or a third party or parties control or have the power to control the others. In determining whether affiliation exists, consideration is given to all appropriate factors including common ownership, common management, and contractual relationships. SBA determines affiliation based on the factors set forth at 13 CFR 121.103.

(b) If the Contractor represented that it was a small business concern, a small disadvantaged business concern, or a joint venture that was any of the small business concerns identified in 19.000(a)(3) prior to award of this contract, the Contractor shall rerepresent its size and socioeconomic status according to paragraph (e) of this clause or, if applicable, paragraph (g) of this clause, upon occurrence of any of the following:

(1) Within 30 days after execution of a novation agreement or within 30 days after modification of the contract to include this clause, if the novation agreement was executed prior to inclusion of this clause in the contract.

(2) Within 30 days after a merger or acquisition that does not require a novation or within 30 days after modification of the contract to include this clause, if the merger or acquisition occurred prior to inclusion of this clause in the contract.

(3) For long-term contracts-

(i) Within 60 to 120 days prior to the end of the fifth year of the contract; and

(ii) Within 60 to 120 days prior to the date specified in the contract for exercising any option thereafter.

(c) The Contractor shall rerepresent its size status in accordance with the size standard in effect at the time of this rerepresentation that corresponds to the North American Industry Classification System (NAICS) code(s) assigned to this contract. The small business size standard corresponding to this NAICS code(s) can be found at https://www.sba.gov/document/support--table-size-standards.

(d) The small business size standard for a Contractor providing an end item that it does not manufacture, process, or produce itself, for a contract other than a construction or service contract, is 500 employees, or 150 employees for information technology value-added resellers under NAICS code 541519, if the acquisition-

(1) Was set aside for small business and has a value above the simplified acquisition threshold;

(2) Used the HUBZone price evaluation preference regardless of dollar value, unless the Contractor waived the price evaluation preference; or

(3) Was an 8(a), HUBZone, service-disabled veteran-owned, economically disadvantaged women-owned, or women-owned small business set-aside or sole-source award regardless of dollar value.

(e) Except as provided in paragraph (g) of this clause, the Contractor shall make the representation(s) required by paragraph (b) of this clause by validating or updating all its representations in the Representations and Certifications section of the System for Award Management (SAM) and its other data in SAM, as necessary, to ensure that they reflect the Contractor's current status. The Contractor shall notify the contracting officer in writing within the https://www.sba.gov/document/support--table-size-https://www.sba.gov/document/support--table-size-timeframes specified in paragraph (b) of this clause, that the data have been validated or updated, and provide the date of the validation or update.

(f) If the Contractor represented that it was other than a small business concern prior to award of this contract, the Contractor may, but is not required to, take the actions required by paragraphs (e) or (g) of this clause.

(g) If the Contractor does not have representations and certifications in SAM, or does not have a representation in SAM for the NAICS code applicable to this contract, the Contractor is required to complete the following rerepresentation and submit it to the contracting office, along with the contract number and the date on which the rerepresentation was completed:

(1) The Contractor represents that it [ ] is, [ ] is not a small business concern under NAICS Code [ ] assigned to contract number [ ].

(2) [Complete only if the Contractor represented itself as a small business concern in paragraph (g)(1) of this clause.] The Contractor represents that it [ ] is, [ ] is not, a small disadvantaged business concern as defined in 13 CFR 124.1001.

(3) Women-owned small business (WOSB) joint venture eligible under the WOSB Program. The Contractor represents that it [ ] is, [ ] is not a joint venture that complies with the requirements of 13 CFR 127.506(a) through (c). [The Contractor shall enter the name and unique entity identifier of each party to the joint venture: .]

(4) Economically disadvantaged women-owned small business (EDWOSB) joint venture.

The Contractor represents that it [ ] is,[ ] is not a joint venture that complies with the requirements of 13 CFR 127.506(a) through (c). [The Contractor shall enter the name and unique entity identifier of each party to the joint venture: .]

(5) Service-disabled veteran-owned small business (SDVOSB) joint venture eligible under the SDVOSB Program. The Contractor represents that it [ ] is, [ ] is not an SDVOSB joint venture eligible under the SDVOSB Program that complies with the requirements of 13 CFR 128.402. [The Contractor shall enter the name and unique entity identifier of each party to the joint venture: .]

(6) HUBZone joint venture eligible under the HUBZone Program.[ Complete only if the offeror is a HUBZone small business concern. ] The offeror represents, as part of its offer, that It [ ] is, [ ] is not a HUBZone joint venture that complies with the requirements of 13 CFR 126.616(a) through (c). [The Contractor shall enter the name and unique entity identifier of each party to the joint venture: .] Each HUBZone small business concern participating in the HUBZone joint venture must be certified as a HUBZone concern. [Contractor to sign and date and insert authorized signer's name and title. ]

(End of clause)

52.222-3 Convict Labor. (JUN 2003)

52.222-19 Child Labor-Cooperation with Authorities and Remedies. (JAN 2025) (Deviation OCT 2025)

52.222-50 Combating Trafficking in Persons. (OCT 2025) (Deviation OCT 2025)

52.226-8 Encouraging Contractor Policies To Ban Text Messaging While Driving. (MAY 2024)

52.232-18 Availability of Funds. (APR 1984)

52.232-33 Payment by Electronic Funds Transfer - System for Award Management. (OCT 2018)

52.232-39 Unenforceability of Unauthorized Obligations. (JUN 2013)

52.232-40 Providing Accelerated Payments to Small Business Subcontractors. (MAR 2023)

52.233-3 Protest after Award. (AUG 1996) (Deviation AUG 2025)

52.233-4 Applicable Law for Breach of Contract Claim. (OCT 2004) (Deviation AUG 2025)

52.240-90 Security Prohibitions and Exclusions Representations and Certifications. (Deviation AUG 2025)

52.240-91 Security Prohibitions and Exclusions. (Deviation AUG 2025)

52.242-5 Payments to Small Business Subcontractors. (JAN 2017)

52.244-6 Subcontracts for Commercial Products and Commercial Services. (OCT 2025)

52.252-1 Solicitation Provisions Incorporated by Reference. (FEB 1998)

This solicitation incorporates one or more solicitation provisions by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. The offeror is cautioned that the listed provisions may include blocks that must be completed by the offeror and submitted with its quotation or offer. In lieu of submitting the full text of those provisions, the offeror may identify the provision by paragraph identifier and provide the appropriate information with its quotation or offer. Also, the full text of a solicitation provision may be accessed electronically at this/these address(es): https://www.acquisition.gov.

(End of provision)

52.252-2 Clauses Incorporated by Reference. (FEB 1998)

This contract incorporates one or more clauses by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. Also, the full text of a clause may be accessed electronically at this/these address(es): https://www.acquisition.gov.

(End of clause)

52.252-5 Authorized Deviations in Provisions. (NOV 2020)

(a) The use in this solicitation of any Federal Acquisition Regulation (48 CFR chapter 1) provision with an authorized deviation is indicated by the addition of (DEVIATION) after the date of the provision.

(b) The use in this solicitation of any [insert regulation name] (48 CFR chapter [ ]) provision with an authorized deviation is indicated by the addition of (DEVIATION) after the name of the regulation.

(End of provision)

52.252-6 Authorized Deviations in Clauses. (NOV 2020)

(a) The use in this solicitation or contract of any Federal Acquisition Regulation (48 CFR Chapter

1) clause with an authorized deviation is indicated by the addition of (DEVIATION) after the date of the clause.

(b) The use in this solicitation or contract of any [insert regulation name] (48 CFR [ ]) clause with an authorized deviation is indicated by the addition of (DEVIATION) after the name of the regulation.

4 - Section 4

3052.205-70 Advertisements, Publicizing Awards, and Releases. (SEP 2012)

H.1 DIRECTIVES, REGULATIONS, AND INSTRUCTIONS (JUL 2013)

a. The Contractor, its personnel, subcontractors, their personnel, and representatives shall become acquainted with and fully comply at all times with the Federal Law Enforcement Training Centers (FLETC)

Regulations, Directives, and Instructions. Any individual shall be subject to removal from the Center for noncompliance.

b. In the event of a conflict between this contract and any FLETC

Directive, Regulation or Instruction the contract prevails.

H.13 PHOTOGRAPHY

No photography, of any nature, is allowed while on the FLETC without the written authorization of the CO. Submit photography requests to the CO at least two (2) business days prior to anticipated photo session.

H.14 CONDUCT OF PERSONNEL

The CO may require the Contractor to remove from the job site any individual under this contract for reasons of misconduct, security, suspected or found to be under the influence of alcohol, drugs, or other incapacitating agent. Contractor and subcontractor personnel shall be subject to dismissal from the premises upon determination by the CO that such action is in the best interests of the Government. The CO has the authority to bar individuals from the installation. Such removal from the job site or dismissal from the premises shall not relieve the Contractor of the requirement to provide sufficient personnel to perform the services as required by this performance work statement.

H.15 CONTRACTOR VEHICLES

a. All Contractor vehicles operated on Government property shall be in operable condition, maintained in good repair, and meet all local, State and Federal safety requirements. Vehicles found to be unsafe or unable to function as designed shall be removed from the job site immediately. Each vehicle operated by the Contractor under this contract shall, at all times, display a valid state license plate and safety inspection sticker, if applicable.

b. All Contractor vehicles shall be operated in accordance with the FLETC traffic regulations.

c. Should a vehicle fail to meet the standards, the Contractor shall be liable of any resultant delays (including jeopardizing their performance report rating on contract schedules).

d. The Contractor's name and telephone number shall be conspicuously legible on both sides of all Contractor vehicles and over-the-road equipment.

H.20 DISCLOSURE OF INFORMATION

a. Neither the Contractor nor any contract personnel shall disclose, or cause to be disseminated, any information concerning the operations which could result in or increase the likelihood of the possibility of a breach of the FLETC (or its partner organizations) security or interrupt the continuity of its operations.

b. No Contractor personnel or representative shall provide any information related to the FLETC activities to any element of the media without the CO's prior written permission. This prohibition includes publicity releases, recruitment notices, etc. All inquiries, comments, or complaints arising from or in connection with the performance of this contract shall be directed to the CO, if dissemination of official information may be required for resolution.

c. Under no circumstances shall the Contractor, or anyone acting on behalf of the Contractor, refer to the equipment or services furnished pursuant to the provisions of this contract in, or in connection with, any news release or commercial advertising, without first obtaining the explicit written consent of the CO.

d. Should any such reference appear in any news release or commercial advertising issued by or on behalf of the Contractor without such prior consent, the Government shall consider institution of all remedies available under the provisions of this contract. Disclosure of information relating to this contract to any person not entitled to receive it, or failure to safeguard any sensitive information that may come to the Contractor or any person under his control, may subject the Contract, his agents, or employees to criminal liability under Title 18, Section 793 and 798, of the United States Code.

e. Deviations from, or violations of, any of the provisions of this paragraph will, in addition to all other criminal and civil remedies provided by law, subject the Contractor to immediate termination for default and the individual(s) involved to a withdrawal of the Government's acceptance and approval of performance on the FLETC sites.

H.21 ADVERTISING OF AWARD

The Contractor shall not refer to awards in commercial advertising in such a manner as to state or imply that the product or service provided is endorsed or preferred by the Federal Government or is considered by the Government to be superior to other products or services.

70LART26QPFB00008

ATTACHMENT 1

Scope of Purchase: Artesia Tactical Training Wall System

1. Purpose

The purpose of this acquisition is to provide a tactical training walls system to support law enforcement training operations. The system will be used to create configurable training environments for use-of-force, tactical operations, and active threat response scenarios.

2. General Requirements

The Contract shall provide a complete modular tactical training wall system capable of constructing configurable interior and/or exterior training environments. The system shall include all components necessary for fully functional, self-supporting, modular structure without the requirement for additional Government-furnished materials.

The system shall meet or exceed the minimum requirements specified herein.

3. Wall Panel Requirements

Item Minimum Requirements Quantity

Standard wall panels Modular solid panels, approximately 48” x 96” 235 EA

Standard short wall panels Modular solid panels, approximately 48” x 48” 4 EA

Standard wall panels Modular solid panels, approximately 24” x 96” 8 EA

• Panels shall be modular and interchangeable within the system.

• Panels shall be Painted and constructed of Pressure-Treated Fascia or equivalent durable material suitable for repeated assembly and disassembly.

• Panels shall be compatible with the connector/bracket system provided under this contract.

4. Door Panel Assemblies

Item Minimum Requirements Quantity

Door panels Modular wall panels with integrated door assembly, approximately 48” x 96”

37 EA (20

left and 17 right)

• Each door panel shall include:

o Installed functional door and trim o Functional hardware (i.e. handle/knob set)

• Door opening shall be approximately 34” wide by 82.5” tall.

• Door assemblies shall be fully integrated and compatible with the modular wall system.

• Panels shall be constructed of Pressure-Treated Fascia or equivalent durable material suitable for repeated assembly and disassembly.

5. Connector/Bracket System

The Contractor shall provide a complete structural connector/bracket system sufficient to assemble, configure, and stabilize the full wall system.

Connector Type Minimum Quantity

Spacer posts 255 EA

Straight (2-way) connectors 200 EA

Tee (3-way) connectors 40 EA

Corner (90-degree) connectors 20 EA

Cross (4-way) connectors 3 EA

End (single) connectors 10 EA

Short wall (1 single and 1 double) connectors

6 EA

• Connectors shall be constructed of corrosion-resistant material (e.g., powder-coated steel or equivalent).

• System shall support repeated assembly and disassembly.

• All hardware required for full system assembly shall be included.

6. Finish/Coating System

Item Requirement Quantity

Protective Coating Primer and exterior-grade paint or equivalent protective finish

1 LOT

• All panels shall include a protective finish suitable for repeated use and environmental exposure.

• Finishing shall include a minimum of:

o One (1) primer coat o One (1) exterior-grade topcoat

7. Installation and Assembly Requirements

• The system shall be delivered as a complete, ready-to-assemble kit.

• Installation shall not require specialized tools beyond standard hand tools typically available to Government Personnel.

• The Contractor shall provide written assembly instructions sufficient for Government installation.

• Installation support may be proposed but is not required.