70LART26QPFB00008 0002.pdf

Offers must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended, by one of the following methods:

(a) By completing items 8 and 15, and returning or (c) By separate letter or electronic communication which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted, such change may be made by letter or electronic communication, provided each letter or electronic communication makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

E. IMPORTANT: is not is required copies to the issuing office.

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT 1. CONTRACT ID CODE

2. AMENDMENT/MODIFICATION NUMBER 3. EFFECTIVE DATE 4. REQUISITION/PURCHASE REQUISITION NUMBER 5. PROJECT NUMBER (If applicable)

7.ADMINISTERED BY (If other than Item 6) CODE

STANDARD FORM 30 (REV. 11/2016)

Prescribed by GSA FAR (48 CFR) 53.243

FACILITY CODE

9A. AMENDMENT OF SOLICITATION NUMBER

9B. DATED (SEE ITEM 11)

10A. MODIFICATION OF CONTRACT/ORDER NUMBER

10B. DATED (SEE ITEM 13)

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

The above numbered solicitation is amended as set forth in Item 14. is extended. is not extended.

12. ACCOUNTING AND APPROPRIATION DATA (If required) copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted;

13. THIS ITEM APPLIES ONLY TO MODIFICATIONS OF CONTRACTS/ORDERS.

IT MODIFIES THE CONTRACT/ORDER NUMBER AS DESCRIBED IN ITEM 14.

CHECK ONE A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE CONTRACT ORDER

NUMBER IN ITEM 10A.

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, appropriation data, etc.) SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103(b).

C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

D. OTHER (Specify type of modification and authority)

Except as provided herein, all terms and conditions of the document referenced in Item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

15C. DATE SIGNED

15A. NAME AND TITLE OF SIGNER (Type or print)

16C. DATE SIGNED

16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

PAGE

6. ISSUED BY CODE

8. NAME AND ADDRESS OF CONTRACTOR (Number, street, county, State and ZIP Code) (X)

CODE

15B. CONTRACTOR/OFFEROR

(Signature of person authorized to sign)

16B. UNITED STATES OF AMERICA

(Signature of Contracting Officer)

Previous edition unusable

PAGESOF

Contractor

The hour and date specified for receipt of Offers to sign this document and return

Queen H. Singleton

See continuation page

DEPARTMENT OF HOMELAND SECURITY

FEDERAL LAW ENFORCEMENT TRAINING CENTERS

2000 BAINBRIDGE AVE

CHARLESTON SC 29405

70LCHS

70LART26QPFB00008

04/22/2026

1 5

CONTINUATION SHEET

REFERENCE NO. OF DOCUMENT BEING CONTINUED PAGES

NAME OF OFFEROR OR CONTRACTOR

SUPPLIES/SERVICES

(B)

UNIT

(D)

UNIT PRICE

(E)

AMOUNT

(F)

OPTIONAL FORM 336 (4-86)

Sponsored by GSA FAR (48 CFR) 53.110

ITEM NO.

(A)

QUANTITY

(C)

NSN 7540-01-152-8067

70LART26QPFB00008/0002

2026 FLETC Operation and Support 70 0509

Tactical Training Walls, Artesia, NM

The purpose of this amendment is to answer questions to the Request for Quote.

All other terms and conditions remain unchanged.

FOB: Destination

Change Item 0001 to read as follows(amount shown is the total amount):

0001 1 LOTactical Training Walls – complete supply package including wall panels, door units, connector hardware, finishing materials, and technical documentation.

Shipping included

Product/Service Code: 5410

Product/Service Description: PREFABRICATED AND

PORTABLE BUILDINGS

QUESTIONS AND ANSWERS FOR QUOTE 70LART26QPFB00008 AMENDMENT 0002

TACTICAL TRAINING WALLS

1. Question:

Wall Height Requirement Clarification

The specification references standard wall panels approximately 48” x 96” (8 ft height).

Would the Government consider alternative panel heights (e.g., 84” / 7 ft) if the system otherwise meets all functional and modular requirements?

ANSWER:

84 inches would be sufficed height

2. Question:

Panel Width / Modularity Clarification

The specification includes panels sized approximately 48” x 96”, 48” x 48”, and 24” x 96”.

Would a system utilizing a standardized panel width of approximately 54” (4.5 ft), while maintaining full modularity and compatibility across configurations, be considered acceptable?

ANSWER:

The training walls will be utilized to create rooms of various sizes and hallways approximately 8 feet wide. The 48” panels will provide this capability.

3. Question:

Material Composition and Ballistic Properties

The specification calls for panels constructed of pressure-treated fascia or equivalent durable material suitable for repeated assembly/disassembly and environmental exposure.

Would alternative materials (e.g., ripstop polyester or similar synthetic composites) that provide comparable durability and outdoor performance be considered acceptable, even if such materials are not ballistic-rated and may allow NLTA/simulation rounds to pass through?

ANSWER:

Please refer to the solicitation requirements and associated attachments for all minimum specifications. All quotes will be evaluated in accordance with the terms of the solicitation issued.

4. Question:

Wall Panel Requirements:

Trango Systems modular wall panels utilize Panel-o-Foam a closed cell cross-linked Polyethylene foam laminate manufactured using an extrusion process that has been laminated on both sides to a solid HDPE extruded sheet. Trango panels are modular, interchangeable and designed for outdoor use without the need for paints or primers. The attached data sheet provides the required information to be evaluated and approved as an equivalent solution.

ANSWER:

The tactical building will be constructed in an open-air environment. Artesia NM has exceptionally high sun, UV and wind exposure. This structure is intended to remain up continuously. The main exposure issue with the wind. We regularly have sustained winds of 45 MPH and gusts of up to 90 MPH.

Please refer to the solicitation requirements and associated attachments for all minimum specifications. All quotes will be evaluated in accordance with the terms of the solicitation issued.

5. Question:

Connector/Bracket System:

Trango Systems employ a turnkey connector solution that securely attaches wall panels directly to one another. Trango walls do not require spacer posts, or different types of configuration connectors. All configurations shall be achieved using Trango key connectors that are constructed of the same materials as the walls. Trango key connector extrusion process is laminated on both sides to a solid HDPE extruded sheet surpasses the requirement for powder coating or corrosion painting. Trango wall kits will be delivered with ample key connectors that exceed the connector bracket requirements. Trango requests that the key connector system shall be approved as equivalent connector / bracket system.

Please refer to the solicitation requirements and associated attachments for all minimum specifications. All quotes will be evaluated in accordance with the terms of the solicitation issued.

6. Question:

Finish/Coating System:

Trango Systems modular wall panels utilize Panel-o-Foam is a closed cell cross-linked Polyethylene foam laminate manufactured using an extrusion process that has been laminated on both sides to a solid HDPE extruded sheet. Trango panels have performance temperature range from -76 ° F. Panels are outdoor designed with a maximum of 1% water absorption rating. Trango panels provide acoustical absorption rating ISO-10534-2, Value .22NRC. This provides additional acoustic overpressure absorption for trainers and students. Trango's panel design meets and exceeds the required finish and coating requirement. The attached data sheet provides the required information to be evaluated and approved as an equivalent solution.

ANSWER:

Please refer to the solicitation requirements and associated attachments for all minimum specifications. All quotes will be evaluated in accordance with the terms of the solicitation issued.

7. Question:

Installation and Assembly Requirements

Trango seeks clarification if the customer desires to have Installation option included in the CLIN base price or proposed as an option?

At the vendor’s discretion.

Sponsored by GSA FAR (48 CFR) 53.110

70LART26QPFB00008 0002 Q&A