FEMA_Uniform_Specifications_Doc__30_OCT__2018.docx

Consolidated FEMA Uniform Specifications

FEMA 001 Men’s Tactical Pants (Navy) FEMA 002 Men’s Tactical Pants (Khaki) FEMA 003 Women’s Tactical Pants (Navy) FEMA 004 Women’s Tactical Pants (Khaki) Color: Khaki, navy blue Fabric Type: Cotton lightweight 65/35 poly cotton rip stop material, Teflon or equivalent fabric, repels water and stains Available in regular and long.

Sizing – Men: Waist - 28-54. Inseams shall range from 28 – 36 inches in two inch increments and will be hemmed for men.

Sizing – Women: Size 2 – 20 shall be available in short, regular and long and will be hemmed for women.

Pant legs will be straight with no cuffs.

Pants must meet or exceed the following criteria:

· Fade and wrinkle resistant

· Multiple quick-access cargo-style pockets, including cell phone pocket

· Two rear pockets with closures

FEMA 005 Unisex Lightweight Jacket (US&R) Color: Midnight Navy Style: Lined waist length jacket with no hood. Cuffed waistband. Document pockets on left and right chest; zippered hand pockets on left and right sides. Shall also have flap seal along the front main zipper to prevent heat loss through the zipper and protect the zipper. One inner pocket on left side.

Fabric Type: Lightweight, windproof and water resistant Sizing – Men: S - 4X Sizing – Women: XS - 2XL Embroidery: DHS seal on removable (hook and loop) panel on left chest pocket or badge tab on left chest that can be concealed in left chest pocket. Customization package will be provided to contract awardee.

FEMA 006 Baseball Style Hat (US&R) FEMA 007 Baseball Style Hat (IMAT) Color: Navy Style: 6 panel hat, flexible fit elastic band, standard profile Fabric Type: Poly Cotton Twill Size: Unisex S- XL Embroidery: DHS seal on front of hat. Customization package will be provided to contract awardee.

FEMA 008 Unisex Tactical Long Sleeve Shirt (US&R) Navy blue FEMA 009 Unisex Tactical Long Sleeve Shirt (US&R) White FEMA 010 Unisex Tactical Long Sleeve Shirt (IMAT) Navy blue FEMA 011 Unisex Tactical Long Sleeve Shirt (IMAT) White Style: Button front long sleeve shirt Colors: Navy, white Tactical Uniform shirts that meet or exceed the following criteria:

· Lightweight 65% poly, 35% ripstop cotton

· Teflon or equivalent treated for spill and stain resistance

· Cape-back with mesh lining

· With sleeve pen pocket on left sleeve and two document pockets on left and right chest

· Customization package will be provided to contract awardee.

Sizes: XS – 4X

FEMA 012 Unisex Job Shirt Style: Pullover collared sweat shirt with long sleeves and quarter zipper Color: Navy blue Job Shirts that meet or exceed the following criteria:

· Fade-resistant cotton-poly fleece fabric with stain resistant treatment

· One chest pocket with hook and loop dividers on right hand side with mic clip

· Reinforced elbows

· Hand-warmer pockets on both sides

· Microphone clip pockets on both shoulders

· Pen pocket on left sleeve

· Collar is no-roll

· DHS/FEMA logo on front left chest. Customization package will be provided to contract awardee.

Sizes: Unisex XS – 4XL

FEMA 013 Mobile Operations Bag Bag must meet or exceed the following criteria:

· Measures 32”L x 14.5”W x 14”H, 6496 cu. inch capacity

· 32 inch main compartment

· Two heavy duty wheels, with retracting grab handle

· Reinforced at edges and bottom

· Adjustable hook and loop dividers in the main compartment

· Identification tag/card holder sewn into bag

· 1600 Denier water resistant rip-stop nylon

· Self-repairing zippers

· Minimum of four exterior zippered pockets

· Bag should be lockable with TSA-approved lock(s)

· Two nylon bands around the bag that culminate in handles at the top of the bag for better weight management and durability of handles (Handles sewn onto the top of the bag are not acceptable.)

· Rugged corner guards on all corners

· Lifetime warranty

· Heavy duty bag to be used in rugged deployed environments

· Colors: Black

FEMA 014 Unisex Short Sleeve Tee Shirt (US&R)

· Clothing Material and Description:

· 100% pre-shrunk cotton jersey knit

· Moisture wicking material

· Minimum 8 oz. fabric weight

· Seamless double – needle top stitched neckline

· Taped neck shoulders

· Double stitched sleeve and waist hems

· Ribbed collar

· Quarter-turned to eliminate center crease

· Sizing: Men’s XS, S, M, L, XL, 2XL, 3XL, 4XL

· Color: Navy Blue FEMA 015 Unisex Long Sleeve Tee Shirt (US&R)

· Clothing Material and Description:

· 100% pre-shrunk cotton jersey knit

· Moisture wicking material

· Minimum 8 oz. fabric weight

· Seamless double – needle top stitched neckline

· Taped neck shoulders

· Double stitched sleeve and waist hems

· Ribbed collar

· Quarter-turned to eliminate center crease

· Sizing: Men’s XS, S, M, L, XL, 2XL, 3XL, 4XL

· Color: Navy Blue FEMA 016 Unisex Hoodie (US&R)

· Clothing Material and Description:

· Mid-weight pullover hoodie with soft fleece lining

· 100% cotton outer shell

· Color: Navy Blue

· 80% cotton / 20% polyester inner fleece lining

· 10oz mid-weight premium fleece

· 32 singles ring spun cotton for softness

· Fitted body; pre-shrunk

· Hood with heavy-duty shoelace drawstring

· Jersey hood lining

· Rib-knit cuff, waist and pocket opening

· Reinforced taped collar seam

· Front pouch pocket.

· Sizing: Men’s XS, S, M, L, XL, 2XL, 3XL, 4XL

FEMA 017 Men’s Short Sleeve Polo Shirt (US&R) Navy Blue FEMA 018 Men’s Short Sleeve Polo Shirt (US&R) White FEMA 019 Men’s Short Sleeve Polo Shirt (IMAT/FEMA) Navy Blue FEMA 020 Men’s Short Sleeve Polo Shirt (IMAT/FEMA) White Colors: Navy Blue, White Fabric Type: 100% pre-shrunk treated cotton, moisture wicking material Buttons: With three button placket. Color shall match shirt color.

Sizing – Men: S - 4X Embroidery: Upper left chest. Customization package will be provided to contract awardee.

FEMA 021 Unisex Multi-Use Parka (US&R) FEMA 022 Unisex Multi-Use Parka (IMAT) Style: Outer shell will have zip-off hood with flap seal. The hood must also be able to be rolled and stored in the collar. The inner layer will be a fleece jacket shell, able to be worn as a stand- alone jacket. The arms of the inner shell can be zippered off to create a vest. The outer and inner shells shall both have document pockets on left and right chest. Both shells shall also have zippered hand pockets on both left and right sides. Both shells shall also have flap seal along the front main zipper to prevent heat loss through the zipper and protect the zipper. The wrist end of the sleeves can be attached to the outer shell.

Color: Navy Fabric Type: Outer shell – waterproof/breathable, inner shell – zip out fleece liner Unisex garment will cover these size ranges:

Sizing – Men: S - 4X Sizing – Women: XS - 2XL Embroidery: DHS seal on removable (hook and loop) panel on left chest pocket or badge tab on left chest that can be concealed in left chest pocket. Customization package will be provided to contract awardee.

FEMA 023 Women’s Short Sleeve Polo Shirt (US&R) Navy blue FEMA 024 Women’s Short Sleeve Polo Shirt (US&R) White FEMA 025 Women’s Short Sleeve Polo Shirt (IMAT/FEMA) Navy blue FEMA 026 Women’s Short Sleeve Polo Shirt (IMAT/FEMA) White Colors: Navy Blue, White Fabric Type: 100% pre-shrunk treated cotton, moisture wicking material Buttons: With three button placket. Color shall match shirt color.

Sizing – Women: XS - 2XL Embroidery: Upper left chest. Customization package will be provided to contract awardee.

FEMA 027 Men’s Long Sleeve Polo Shirt (US&R) Navy blue FEMA 028 Men’s Long Sleeve Polo Shirt (US&R) White FEMA 029 Men’s Long Sleeve Polo Shirt (IMAT/FEMA) Navy blue FEMA 030 Men’s Long Sleeve Polo Shirt (IMAT/FEMA) White Color: Navy Blue, White Buttons: Color shall match shirt color.

Fabric Type: 100% pre-shrunk treated cotton, moisture wicking material Sizing – Men: S - 4X Embroidery: Upper left chest. Customization package will be provided to contract awardee.

FEMA 031 Women’s Long Sleeve Polo Shirt (US&R) Navy blue FEMA 032 Women’s Long Sleeve Polo Shirt (US&R) White FEMA 033 Women’s Long Sleeve Polo Shirt (IMAT/FEMA) Navy blue FEMA 034 Women’s Long Sleeve Polo Shirt (IMAT/FEMA) White Color: Navy Blue, White Buttons: Color shall match shirt color.

Fabric Type: 100% pre-shrunk treated cotton, moisture wicking material Sizing – Women: XS - 2XL Embroidery: Upper left chest. Customization package will be provided to contract awardee.

FEMA 035 Men’s Long Sleeve Button-down Shirt (US&R) Navy blue FEMA 036 Men’s Long Sleeve Button-down Shirt (US&R) White FEMA 037 Men’s Long Sleeve Button-down Shirt (IMAT) Navy blue FEMA 038 Men’s Long Sleeve Button-down Shirt (IMAT) White Style: Oxford style shirt Buttons: Pearl-tone buttons Colors: White, Navy Fabric Type: 100% cotton twill, stain, liquid, and soil resistant material Sizing – Men: S - 6X, regular and long sizes Embroidery: Upper left chest. Customization package will be provided to contract awardee.

FEMA 039 Women’s Long Sleeve Button-down Shirt (US&R) Navy blue FEMA 040 Women’s Long Sleeve Button-down Shirt (US&R) White FEMA 041 Women’s Long Sleeve Button-down Shirt (IMAT) Navy blue FEMA 042 Women’s Long Sleeve Button-down Shirt (IMAT) White Style: Oxford style shirt Buttons: Pearl-tone buttons Colors: White, Navy Fabric Type: 100% cotton twill, stain, liquid, and soil resistant material Sizing – Women: XS - 2XL, regular and long sizes Embroidery: Upper left chest. Customization package will be provided to contract awardee.

FEMA 043 Women’s Short Sleeve Polo Shirt (US&R) Navy blue FEMA 044 Women’s Short Sleeve Polo Shirt (US&R) White Colors: Navy Blue, White Fabric Type: 100% pre-shrunk treated cotton, moisture wicking material Buttons: With three button placket. Color shall match shirt color.

Sizing – Women: XS - 2XL Embroidery: Upper left chest. Customization package will be provided to contract awardee

FEMA 045 Unisex Tactical Long Sleeve Shirt (US&R) Navy blue FEMA 046 Unisex Tactical Long Sleeve Shirt (US&R) White Style: Button front long sleeve shirt Colors: Navy, white Tactical Uniform shirts that meet or exceed the following criteria:

· Lightweight 65% poly, 35% ripstop cotton

· Teflon or equivalent treated for spill and stain resistance

· Cape-back with mesh lining

· With sleeve pen pocket on left sleeve and two document pockets on left and right chest

· Customization package will be provided to contract awardee.

Sizes: S – 5X

Specifications for FEMA Region X Extreme Cold Weather (ECW) Gear:

FEMA ECW01 Long Sleeve Undershirt, Extreme Cold Weather Description of Item. Item is worn in field based operations in arctic conditions of zero to minus 40 degrees Fahrenheit. Shirt designed to provide light insulation for use in mild climates as well as a base layer for colder climates. These are constructed with approximately 93% polyester and 7% spandex circular knit plaited jersey, heavyweight jersey with stretch. The jersey face is durable and low pilling. This material offers stretch for increased comfort during movement and is designated to be light weight, low in bulk and has anti-microbial and anti-odor defense. Flat-locked seams and cover-stitched hems reduce chafing and increase comfort during movement. The shirt is long sleeved and features a mid-chest zipper that closes to convert to a mock turtleneck. The shirt is to act as a moisture-wicking layer to draw moisture away from the skin, transferring it to the outer layers of the ECW clothing system.

Color: Black.

Fit: Shirt should be worn next to the skin and provide a slightly snug fit. Shirt should not impede any movement by the wearer nor should the shirt be binding at any location. Shirt tail should fall below the waist and shirt sleeves should extend to the start of the thumb.

Laundering: Item must be machine-washable: regular or gentle cycle. Item must be able to be machine-dried. Item must not noticeably shrink in the dryer. Item must not require ironing.

Sizes: Unisex, XS – 4XL FEMA ECW02 Drawers, Extreme Cold Weather Description of Item: Item is worn in field based operations in arctic conditions of zero to minus 40 degrees Fahrenheit. Drawers designed to provide light insulation for use in mild climates as well as a base layer for colder climates. These are constructed with approximately 93% polyester and 7% spandex circular knit plaited jersey, heavyweight jersey with stretch. The jersey face is durable and low pilling. This material offers stretch for increased comfort during movement and is designated to be light weight, low in bulk and has anti-microbial and anti-odor defense. Flat-locked seams and cover-stitched hems are added to reduce chafing and increase comfort during movement. The drawers will feature an elastic waistband. The underwear layer next to the skin acts as a moisture wicking layer and serves to draw moisture away from the skin, transferring it to the outer layers of the ECW system.

Color: Black.

Fit: Drawers should be worn next to the skin and provide a slightly snug fit. Drawers should not impede any movement by the wearer nor should the drawers be binding at any location. Legs of the drawers should extend to the ankle joint when in a standing position.

Laundering: Item must be machine-washable: regular or gentle cycle. Item must be able to be machine-dried. Item must not noticeably shrink in the dryer. Item must not require ironing.

Sizes: Unisex: XS -4XL, Regular and Long

FEMA ECW03 Bib Overall, Extreme Cold Weather Description of Item: Item is worn in field based operations in arctic conditions of zero to minus 40 degrees Fahrenheit. Waterproof, breathable and insulated bibs with snow gaiters. Must include side boot zippers, preferably full leg zippers, and bib material must extend above the waist on the front, sides and back. The bib overall is used as an outer layer, worn over the extreme cold weather drawers, to provide insulation and resistance from wind and water.

Color: Black.

Fit: Bibs are designed to fit over a base layer; therefore should be loose fitting but not baggy on the individual. Should permit freedom of movement to walk, sit, stand, and high step thru snow. Shoulder straps should be adjusted to accommodate torso length. The bottom of the legs should extend to at least the ankle joint and be able to fit boots inside the pants legs.

Laundering: Item must be machine-washable: regular or gentle cycle. Item must be able to be machine-dried. Item must not noticeably shrink in the dryer. Item must not require ironing.

Sizes: Unisex, XS – 4XL, Regular and Long

FEMA ECW04 Parka, Extreme Cold Weather, Black FEMA ECW05 Parka, Extreme Cold Weather, Navy blue

Description of Item: Item is worn in field based operations in arctic conditions of zero to minus 40 degrees Fahrenheit. Jacket system consisting of a waterproof, breathable, wind resistant outer parka shell with inner removable insulating liner. Shell and liner can be worn individually or together (a “3-in1” system). Parka should be a 2-layer waterproof breathable fabric with 100% seam sealed. Parka must include a hood, chin guard, 2-way front zipper, drawcord or elastic hem and adjustable cuffs. Ideally, the parka will have a minimum of two outer pockets and one inner pocket. Additionally the parka should include zippered ventilation under the arms and an internal drawstring or powder skirt at the waist. Insulating liner will be constructed from wicking synthetic material. The parka is used as an outer layer, worn over the extreme cold weather shirt, to provide insulation and protection from wind and water.

Color options: Black or Navy Blue.

Fit: Parka is designed to fit over a base layer; therefore should be loose fitting to accommodate three layers underneath (bibs, base layer, fleece or sweater) but not baggy on the individual. Should permit freedom of movement to raise arms to shoulder level and extend arms fully forward. Should not bind in the neck, shoulders, under the arms or around the waist. Bottom of the parka should extend to at least six inches below the waist. Sleeves should extend to at least the base of the thumb.

Laundering: Item must be machine-washable: regular or gentle cycle. Item must be able to be machine-dried. Item must not noticeably shrink in the dryer. Item must not require ironing.

Sizes: Unisex, XS – 4XL

FEMA ECW06 Mittens, Extreme Cold Weather Description of Item: Item is worn in field based operations in arctic conditions of zero to minus 40 degrees Fahrenheit. The mitten is constructed from waterproof, tear resistant synthetic material that has an elasticized wrist and a long gauntlet that extends up the forearm with an adjustable cord and barrel lock. Mitten should be heavily insulated; internal connecting inserts are made from a blend of wool/nylon yarn or synthetic fibers. The mitten set can be worn over the glove liner (FEMA ECW 007) to provide environmental protection to the hands in cold environments. The outer shell of the mitten set can be separated from the insulating liner for drying.

Color: Black.

Fit: Mitten should not be snug nor limit circulation. Fingers should have room to move within the mitten. Mittens should be long enough to allow for a quarter inch of space past the fingertips, but no more than one half inch. Mittens should be sized with the individual wearing the glove liner. The space within the mitten should allow for the use of a hand warmer.

Laundering: The mittens may be either machine washable or hand washable, depending on materials used. The mittens may not be dry-cleaned. If the materials require it, the mittens may be line-dried.

Sizes: Unisex, XS - XL

FEMA ECW07 Gloves/inserts, Cold Weather Description of Item: Item is worn in field based operations in arctic conditions of zero to minus 20 degrees Fahrenheit. The glove is constructed from waterproof, tear resistant synthetic material that has an elasticized wrist and a long gauntlet that extends up the forearm with an adjustable cord and barrel lock. Internal connecting insert are made from a blend of wool/nylon yarn or synthetic fibers. The gloves are used for light work duty. They may be worn alone or, for additional warmth in cold conditions, may be worn with the cold weather glove inserts.

Color: Black.

Fit: Glove should not be snug nor limit circulation. Fingers should have room to move within the glove. The glove should be long enough to allow for a quarter inch of space past the fingertips, but no more than one half inch. Gloves should be sized with the individual wearing the glove insert.

Laundering: The gloves may be either machine washable or hand washable, depending on materials used. The gloves may not be dry-cleaned. If the materials require it, the gloves may be line-dried.

Sizes: Unisex, XS - XL

FEMA ECW08 Balaclava, Extreme Cold Weather Description of Item: Item is worn in field based operations in arctic conditions of zero to minus 40 degrees Fahrenheit. A balaclava with single face opening which will allow for eye exposure only, while exposure of the entire facial area can be achieved by means of an elasticized adjustment feature. Neck protection is accomplished by an extending bib. The balaclava is made of wool or synthetic material that wicks moisture and is wind resistant. The balaclava provides environmental protection for the face, neck and head and is worn under the parka.

Color: Black.

Fit: Balaclava should fit over the user’s head and be comfortable to the individual. Should be form-fitting but not tight. Should be loose enough to be pulled down around the neck and worn as a neck gaiter.

Laundering: Item must be machine-washable: regular or gentle cycle. Item must be able to be machine-dried. Item must not noticeably shrink in the dryer. Item must not require ironing.

Sizes: Unisex, XS – XL

Specifications for FEMA Corps:

FEMA FC 001 Short sleeve tee shirt, Royal blue FEMA FC 002 Short sleeve tee shirt, Red

· Clothing Material and Description:

· 100% pre-shrunk cotton jersey knit

· Minimum 8 oz. fabric weight

· Seamless double – needle top stitched neckline

· Taped neck shoulders

· Double stitched sleeve and waist hems

· Ribbed collar

· Quarter-turned to eliminate center crease

· Sizing: Men’s S, M, L, XL, 2XL, 3XL, 4XL

· Colors: Royal Blue, Red

· Measurements:

· Logo size (DHS/FEMA): 2.25 inches in diameter (approx.)

· Front Text “FEMA Corps”: 0.75 inches in height, 3.5 inches in width (approx.)

· Back Text “FEMA Corps”: two lines of text with maximum height to center across back, not to be less than 3”

· Logo size (NCCC): 3.25" in diameter

· Design layout:

· Full color silk screen of logo (DHS/FEMA): Front left breast

· Front Text “FEMA Corps”: Front left breast, silk screen under logo

· Back Text “FEMA Corps”: Back top-centered, silk screen

· Full color silk screen of logo (NCCC): left arm FEMA FC 003 Long sleeve tee shirt, Royal blue FEMA FC 004 Long sleeve tee shirt, Red

· Clothing Material and Description:

· 100% pre-shrunk cotton jersey knit

· Minimum 8 oz. fabric weight

· Seamless double – needle top stitched neckline

· Taped neck shoulders

· Double stitched sleeve and waist hems

· Ribbed collar

· Quarter-turned to eliminate center crease

· Sizing: Men’s S, M, L, XL, 2XL, 3XL, 4XL

· Colors: Royal Blue, Red

· Measurements:

· Logo size (DHS/FEMA): 2.25 inches in diameter (approx.)

· Front Text “FEMA Corps”: 0.75 inches in height, 3.5 inches in width (approx.)

· Back Text “FEMA Corps”: two lines of text with maximum height to center across back, not to be less than 3”

· Logo size (NCCC): 3.25" in diameter

· Design layout:

· Full color silk screen of logo (DHS/FEMA): Front left breast

· Front Text “FEMA Corps”: Front left breast, silk screen under logo

· Back Text “FEMA Corps”: Back top-centered, silk screen

· Full color silk screen of logo (NCCC): left arm, similar placement to short sleeve t-shirt FEMA FC 005 Short sleeve polo shirt, Royal blue FEMA FC 006 Short sleeve polo shirt, Red

· Clothing Material and Description:

· Fabric Type:100% Treated Cotton, pique polo

· Finishing: Non Fading

· Minimum 6.4oz fabric weight

· Buttons – 3 or 4 hole Melamine buttons that won’t melt, burn, or crack.

· LABELS: Heat Transfer. Care label, size label, country of origin and fiber content label permanently attached to the garment.

· Stitching and finishing: Stitches per inch are 10-12 on all operations with dyed to match thread; all seams are flexible to prevent stitches from breaking when the garment is stretched.

· ¼” single needle top stitch on the seams of the armholes and shoulders

· Neckline has 1/4” single needle topstitching

· Front Placket is 1 ¼” wide with edge stitching on both sides

· Hem has 1” turned up with ¼” double needle coverstitch

· Sizing: Men’s S, M, L, XL, 2XL, 3XL, 4XL

· Colors: Royal Blue, Red

· Measurements:

· Patched logo size (DHS/FEMA): 2.25 inches in diameter (approx.)

· Front Text “FEMA Corps”: 0.75 inches in height, 3.5 inches in width (approx.)

· Patched logo size (NCCC): 3.25" in diameter

· Design layout:

· Patched logo (DHS/FEMA): Front left breast

· Front Text “FEMA Corps”: Front left breast, embroidered under patched logo

· Patched logo (NCCC): left arm

FEMA FC 007 Men’s Hoodie

· Clothing Material and Description:

· Mid-weight pullover hoodie with soft fleece lining

· 100% cotton outer shell

· 80% cotton / 20% polyester inner fleece lining

· 10oz mid-weight premium fleece

· 32 singles ring spun cotton for softness

· Fitted body; pre-shrunk

· Hood with heavy-duty shoelace drawstring

· Jersey hood lining

· Rib-knit cuff, waist and pocket opening

· Reinforced taped collar seam

· Front pouch pocket

· Sizing: Men’s S, M, L, XL, 2XL, 3XL, 4XL

· Color: Royal Blue

· Measurements:

· Patched logo size (DHS/FEMA): 2.25 inches in diameter (approx.)

· Front Text “FEMA Corps”: 0.75 inches in height, 3.5 inches in width (approx.)

· Back Text “FEMA Corps”: two lines of text with maximum height to center across back, not to be less than 3”

· Patched logo size (NCCC): 3.25" in diameter

· Design layout:

· Patched logo (DHS/FEMA): Front left breast

· Front Text “FEMA Corps”: Front left breast, embroidered under patched logo

· Back Text “FEMA Corps”: Back top-centered silk screen

· Patched logo (NCCC): left arm FEMA FC 008 Men’s Lightweight Jacket

· Clothing Material and Description:

· Zip-up, double-lined, with pockets

· Fabric Type: Lightweight and windproof, 100% nylon or polyester micro fiber

· Sizing – Men’s S, M, L, XL, 2XL, 3XL, 4XL

· Color: Royal Blue

· Measurements:

· Patched logo size (DHS/FEMA): 2.25 inches in diameter (approx.)

· Front Text “FEMA Corps”: 0.75 inches in height, 3.5 inches in width (approx.)

· Back Text “FEMA Corps”: two lines of text with maximum height to center across back, not to be less than 3”

· Patched logo size (NCCC): 3.25" in diameter

· Design layout:

· Patched logo (DHS/FEMA): Front left breast

· Front Text “FEMA Corps”: Front left breast, embroidered under patched logo

· Back Text “FEMA Corps”: Back top-centered silk screen

· Patched logo (NCCC): left arm

FEMA FC 009 Adjustable Baseball Style Hat with “FEMA Corps”

· Fabric Type: Poly Cotton Twill

· Sizing – one-size-fits-all

· Adjustable band: snap and elastic adjustment bands

· Color: Royal Blue

· Embroidery: “FEMA Corps” block lettering on front of hat, embroidered, 4.5” wide, 1.5” tall Consolidated FEMA Uniform Specifications