7-Exh I - NSB-3657 SPEC NABI Meritor Brake Parts.pdf

Exhibit I – Specifications

NABI LOW-FLOOR MERITOR

and WEBB BRAKE PARTS

Document Control # Workflow ID Revision #

NSB-3657 2976225 3

Effective Date: October 4, 2024

Name Title

Originator: Breyonte Brewer Engineering Specialist

Approver: Theresa Smith Manager, Bus Fleet Engineering

Revision # Description Initials Date

3 Updated Scope: Add Webb Wheel Products BB 10/04/2024

2 Update to current format MD 03/07/2022

1 Affirmed Current Requirement TVJ 07/30/2017

0 Initial Release TVJ 08/25/2016

DART Engineering https://legacy-dartnet.dart.org/webapps/workflow/510/default.asp?FindId=2976225

NSB-3657 NABI LOW-FLOOR MERITOR and WEBB

BRAKE PARTS

Rev# 3

p. 2 of 4 Effective Date: October 4, 2024

Table of Contents

1.0 Scope

2.0 Reference Documentation

3.0 Definitions and Abbreviations

4.0 Requirements

5.0 Packaging

6.0 Appendix A

p. 3 of 4 Effective Date: October 4, 2024

1.0 Scope

This Specification outlines the requirements for replacement OEM Webb Wheel Products and Meritor Parts Xpress, which are used on Dallas Area Rapid Transit (DART) NABI

Low-Floor Bus Fleets. All items required for this solicitation are listed in the Appendix A.

2.0 Reference Documentation

Contractor shall be responsible for adhering to the following documents with latest revisions and shall comply therewith.

DDC

NUMBER

DESCRIPTION

NA NABI LOW-FLOOR PARTS MANUAL

3.0 Definitions and Abbreviations

°F Degrees Fahrenheit (Unit of Temperature)

Form, Fit and

Function

Form - shape, materials, interfacing, and often appearance.

Fit - size, including connectors and weight

Function - perform the exact same functions, that is, provides the exact same output, given appropriate inputs

DDC Development Document Control

OEM Original Equipment Manufacturer

P/N Part Number

4.0 Requirements

A. The product must meet the form, fit and function of the OEM product listed.

B. The product shall have a minimum of three (3) years of transit field experience under conditions of –15 to 115°F similar to those found in Dallas, Texas.

C. The product shall be a commercially available design.

D. The product shall interface to existing system without any modifications to the product, vehicle or systems currently installed.

p. 4 of 4 Effective Date: October 4, 2024

5.0 Packaging

A. Product shall be packaged to best industry practice to prevent damage. The packing slip shall include DART purchase order number, DART part number, manufacturer part number, manufacturer name and part description. The packaging exterior (e.g., individual part bag, box, etc.) shall include manufacturer’s part number and manufacturer’s name.

B. Product shall be packaged to provide maximum protection against puncturing, abrasion, bending, or thermal damage during shipment.

6.0 Appendix A