7._Exhibit_A-2_Specs.pdf
PDF 1 MB Posted
- Attached to
- C5611941-D - Hot Tap Services
- Solicitation number
- 0000030511
- Issued by
- Sacramento County, California
About this file
This document appears to be a technical specification for Identification for Plumbing Piping and Equipment as part of a state contract opportunity for the California Department of Corrections and Rehabilitation (CDCR) for the Cognitive Behavioral Treatment Space project at the California State Prison in Sacramento. The specification covers requirements for pipe markers, valve tags, equipment nameplates, underground marking tape, and related coordination activities. The contract opportunity, titled "Hot Tap Services", requires the contractor to provide hot tap services, including all labor, materials, equipment, supplies, licenses/permits, insurance, transportation, and other necessary items for the Inmate/Ward Labor Program at the California State Prison in Sacramento, California.
The contract pricing and terms are not explicitly provided in the document, but the Rate Sheet (Exhibit B-1) is referenced. The contract is limited to the state of California, specifically in Sacramento County. No information is provided regarding any set-asides, incumbents, funding sources, or other salient commercial details.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| 6._Exhibit_A-1_Plan_Sheets.pdf | ||
| C5611941-D_-_Addendum_1.pdf | ||
| 9._Exhibit_B-1_-_Rate_Sheet.xlsx | XLSX spreadsheet | |
| Bid_Package_C5611941-D_-_final.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
HY Architects California State Prison - Sacramento P-000347 Cognitive Behavioral Treatment Space
IDENTIFICATION FOR PLUMBING PIPING AND EQUIPMENT
CDCR-SDD 20141119 22 05 53 - 1 March 11, 2022
SECTION 22 05 53
IDENTIFICATION FOR PLUMBING PIPING AND EQUIPMENT
PART 1 GENERAL
1.1 SUMMARY
A. Section Includes:
1. Pipe Markers.
2. Valve Tags.
3. Equipment Nameplates.
4. Underground Marking Tape.
5. Chart and Diagram Frames.
B. Related Sections:
1. Section 10 14 00 - Signage.
2. Section 22 05 00 - Common Work Results for Plumbing.
3. Section 22 13 19 – Sanitary Waste Piping Specialties
1.2 REFERENCES
A. ASME A13.1 - Scheme for the Identification of Piping Systems.
1.3 SUBMITTALS
A. Submit under provisions of Division 1.
B. Product Data: Indicate model, type, and application usage.
C. Submit list of wording, symbols, letter size, letter style, and color coding for each system and vault cover.
D. Submit valve numbering scheme, valve chart and schedule, including valve tag number, location, function type, and valve manufacturer’s name and model number.
1.4 COORDINATION
A. Coordinate with CDCR Representative for preferred color schemes and service abbreviations and valve and equipment numbering schemes prior to submittal review.
B. Coordinate installation of identifying devices with completion of covering of surfaces where devices are to be applied.
C. Coordinate installation of identifying devices with location of access panels and doors.
D. Install identifying devices before installing acoustical ceilings and similar concealment. If not installed before ceiling is installed, the Contractor must remove ceiling at no additional cost to the CDCR and install identifying devices.
California Department of Corrections and Rehabilitation (CDCR) Specifications
Bid Number C5611941-D Exhibit A-2
IDENTIFICATION FOR PLUMBING PIPING AND EQUIPMENT
CDCR-SDD 20141119 22 05 53 - 2 March 11, 2022
PART 2 PRODUCTS
2.1 ACCEPTABLE MANUFACTURERS
A. Seton Name Plate Corp.
B. Brimar.
C. Brady.
2.2 PIPE MARKERS
A. Markers: ASME A13.1.
1. Pressure sensitive vinyl (self-sticking) material.
2. Mechanically fastened type: Snap on or strap on.
a. For dirty, greasy, or oily pipe where pressure sensitive markers may not perform satisfactorily.
3. All weather film for outdoor exposed piping.
4. Provide 360 degree and pipe flow arrows and fluid being conveyed.
5. Size of letters legend:
OUTSIDE DIAMETER OF
PIPE OR PIPE
COVERING
LENGTH OF COLOR
FIELD
SIZE OF LETTERS
AND ARROWS
3/4 to 1-1/4 inch 8 inch 1/2 inch
1-1/2 to 2 inch 8 inch 3/4 inch 2-1/2 to 6 inch 12 inch 1-1/4 inch
8 to 10 inches 24 inch 2-1/2 inch Over 10 inches 32 inch 3-1/2 inch
2.3 EQUIPMENT NAME PLATES
A. 1/8-inch rigid plastic or Bakelite with 4 edges beveled, with black background and white border and letters.
1. Two 3/8-inch mounting holes.
2. Minimum 1/2-inch high lettering.
3. Commercial quality, rust resisting nuts and bolts with backwashers, self-tapping screws or rivets.
2.4 UNDERGROUND MARKING TAPE
A. General: Provide underground pipe marking tape on all pipes buried beneath the ground.
Provide a continuous length of tape 12 inches below the finished earth surface directly above the buried pipe. Provide a second continuous length of tape 12 inches above the top of the buried pipe if the top of the pipe is lower than 36 inches from the top of the finished earth surface.
B. Tape: 5 mil inert plastic film for underground use.
California Department of Corrections and Rehabilitation (CDCR) Specifications
Bid Number C5611941-D
IDENTIFICATION FOR PLUMBING PIPING AND EQUIPMENT
CDCR-SDD 20141119 22 05 53 - 3 March 11, 2022
C. Resistant to alkalis, acids and other destructive agents found in soil, information in Civil Engineers Soils Report.
D. Minimum tensile strength: 120 pounds per 6-inch width.
E. Minimum elongation: 500 percent.
F. Provide detectable underground tape above all buried pipes on the Project. Provide a continuous printed message repeated every 16 to 36 inches warning of pipe buried below similar to (i.e., “CAUTION STEAM LINE BURIED BELOW”).
G. Color code:
1. Blue: Water systems, domestic and fire.
2. Green: Sanitary and storm sewer system.
H. Provide tape widths of 2, 3, 6, 9, and 12-inches for lines buried 10, 20, 30, 40, and 50 inches or greater, respectively.
PART 3 EXECUTION
3.1 PREPARATION
A. Degrease and clean surfaces to receive adhesive for identification materials.
3.2 PIPE IDENTIFICATION
A. Install markers with tape color bands over each end of marker, extending around pipe and overlapping a minimum of 30 degrees.
3.3 INSTALLATION OF UNDERGROUND MARKING TAPE
A. Install underground marking tape directly above all outside utility lines.
B. Allow 12 inches between tape and line and install as close to grade level as feasible.
END OF SECTION
California Department of Corrections and Rehabilitation (CDCR) Specifications
Bid Number C5611941-D
File details come from the government source that posted it. Updated .