7-Attachment G.pdf

Technical Specifications Comply

YES NO

4-1 Design Criteria

4-1.1 Design criteria shall be in accordance with current industry best practices and engineering standards applicable at the time of construction.

4-2 General Equipment

4-2.1 Four-wheel-drive, enclosed cab compact utility vehicle suitable for municipal grounds, roadway shoulder, and sidewalk maintenance

4-2.2 Overall width of 63 in 4-2.3 Overall height of 82 in 4-2.4 Overall length of 120 in 4-2.5 Wheelbase of 80 in 4-2.6 Ground clearance of 10 in 4-2.7 Turning radius of 13.5 ft or tighter 4-2.8 Towing capacity of 1,300 lbs 4-3 Cab 4-3.1 Fully enclosed factory cab 4-3.2 HVAC - air conditioning, heater, and defroster 4-3.3 Hydrostatic steering wheel with manual tilt adjustment 4-3.4 Digital multi-function meter with speedometer 4-3.5 Pre-wired provision for AM/FM stereo with speakers and antenna 4-3.6 Fully opening, roll-downside windows 4-3.7 Horn 4-3.8 Dash-mounted parking brake 4-3.9 Retractable two-point seat belts, driver and passenger positions 4-3.10 In-cab dumping controls 4-3.11 Deluxe 60/40 split bench seating with driver-side seat adjustment 4-3.12 Underseat storage compartments 4-3.13 Dual side mirrors, cab-mounted 4-3.14 Mesh screen cover on rear window 4-4 Engine

4-4.1 Three (3) cylinder liquid-cooled diesel engine or environmentally friendly equivalent

4-4.2 Fuel tank capacity of 7.5 gallons

4-4.3 23 HP

4-5 Chassis

4-5.1 Rollover Protective Structure (ROPS) meeting SAE J2194 and OSHA

4-5.2 Variable hydrostatic transmission (belt or hydro-mechanical) providing high and low forward ranges

4-5.3 Hand throttle control kit for stationary/PTO-driven attachment operation

4-5.4 Engine-driven auxiliary hydraulic pump for attachment operation 4-5.5 Limited-slip front differential and lockable rear differential

4-5.6 Deluxe front guard package including radiator guard, front bumper, and headlight lens guard

4-5.7 Front-mounted, quick-attach implement mount compatible with rotary broom and other front-mounted implements

4-5.8 Tie-down points 4-5.9 Front and rear 2-inch hitch receivers 4-5.10 Front fender mud guards (paired) 4-5.11 Rear fender mud guards (paired) 4-6 Brakes 4-6.1 Front and rear wet-disc brakes 4-7 Electrical

4-7.1 Rear-mounted backup alarm, self-adjusting, minimum 97 dB

4-7.2 Amber (Amber & Green) strobe/beacon light with roof or cab mount kit, wired to a dash-accessible switch

4-7.3 Turn signal and hazard light kit meeting applicable roadway-use requirements

4-8 Cargo Box 4-8.1 58 in x 40 in x 11 in, 4-8.2 Load capacity of 1,100 lbs, 4-8.3 Hydraulic cargo box dump system and hydraulic oil cooler, factory installed

4-9 Rotary Broom attachment 4-9.1 60 inches wide 4-9.2 Front-mounted, compatible with vehicle's quick-attach hitch

4-9.3 Hydraulically driven rotation and angle adjustment operable from the cab, powered by the vehicle's auxiliary hydraulic system

4-10 Material Spreader attachment

4-10.1 Vehicle-mounted hopper/broadcast spreader suitable for rock salt, sand, and ice-control blends. Electric motor. Non-metal body

4-10.2 10 ft3 capacity suitable for a compact UTV chassis, per manufacturer rating

4-10.3 In-cab electronic or hydraulic spread-rate control

4-10.4

Rear or bed-mounted, compatible with the vehicle's chassis and electrical/hydraulic system without permanent modification voiding vehicle warranty

4-11 Paint

4-11.1 High-visibility safety orange or equivalent high-visibility exterior finish

99-1 Warranty and Maintenance

99-1.1 The manufacturer’s warranty for the complete unit shall be submitted in writing with the Bid

99-1.2 The warranty shall provide for the replacement of all defective parts during the warranty period

99-1.3 Warranty repairs shall be performed at no cost to the City of Detroit

99-1.5 One (1) year parts and labor warranty

99-1.6 All preventive maintenance shall be done onsite

99-2 Diagnostic materials / manuals / tools

99-2.1 Three sets of operating and diagnostic manuals, software (unlimited licensing) and hardware needed to troubleshoot and repair

99-2.2 On-site equipment training provided by vendor