697DCK-24-R-00497 BIL Funded Materials Electrical Distribution System Refurbishment Project.pdf

SEE ADDENDUMIS CHECKED.

CODE 17a. PAYMENT WILL BE MADE BY

CODE

FACILITYCODE 16a. CONTRACTOR/

TELEPHONE NO.

16b. CHECK IF REMITTANCE IS DIFFERENT AND PUT SUCH ADDRESS IN OFFER

OFFEROR

AAQ510ATL-AFN

COLLEGE PARK GA 30337

1701 COLUMBIA AVENUE

AAQ-500 - REGIONAL ACQUISITIONS

FEDERAL AVIATION ADMINISTRATION

769F378M

CAROLINA PR 009797421

5000 CARR 190

SAN JUAN ENV SSC

69F378 DOT FAA WEW34-ZSU

769F378M

CODE 15. ADMINISTERED BYCODE 14. DELIVER TO

X

X X

SEE SCHEDULE

BLOCK IS MARKED

335999

SIZE STANDARD:

100.00% FORSET ASIDE

UNRESTRICTED

AAQ510ATL-AFN

COLLEGE PARK GA 30337

1701 COLUMBIA AVENUE

AAQ-500 - REGIONAL ACQUISITIONS

FEDERAL AVIATION ADMINISTRATION

RFPIFB

11. DELIVERY FOR FOB10. THIS ACQUISITION ISCODE 9. ISSUED BY

RFQ

13. METHOD OF SOLICITATION

DESTINATION UNLESS

SIC:

SMALL BUSINESS

12. DISCOUNT TERMS

07/26/2024 1700 ED

07/12/2024

404-305-5790Regina Singleton (No collect calls)

INFORMATION CALL:

FOR SOLICITATION 8. OFFER DUE DATE/LOCAL TIMEb. TELEPHONE NUMBERa. NAME

4. ORDER NUMBER3. AWARD/ 2. CONTRACT NO.

7.

6. SOLICITATION

697DCK-24-R-00497

5. SOLICITATION NUMBER

SOLICITATION/CONTRACT/ORDER FOR COMMERCIAL ITEMS 1. REQUISITION NUMBER PAGE OF

1 41ES-24-01579

OFFEROR TO COMPLETE BLOCKS 12, 16, 22, 23, & 28

EFFECTIVE DATE

17b. SUBMIT INVOICES TO ADDRESS SHOWN IN BLOCK 17a. UNLESS BLOCK BELOW

ISSUE DATE

23.

AMOUNT

22.

UNIT PRICE

21.

UNIT

20.

QUANTITY

19.

SCHEDULE OF SUPPLIES/SERVICES

18.

ITEM NO.

BIL Funded-Electrical Equipment for Electrical

Distribution System Refurbishment Project

Continued ...

27. AWARD OF CONTRACT: REFERENCE

HEREIN, IS ACCEPTED AS TO ITEMS:

X

DATED

Regina A. Singleton

. YOUR OFFER ON SOLICITATION (BLOCK 5),

INCLUDING ANY ADDITIONS OR CHANGES WHICH ARE SET FORTH

40d. TOTAL CONTAINERS40c. DATE REC'D (YY/MM/DD)

40b. RECEIVED AT (Location)

40a. RECEIVED BY (Print)

26. CONTRACTOR IS REQUIRED TO SIGN THIS DOCUMENT AND RETURN

38. PAID BY37. S/R VOUCHER NUMBER36. S/R ACCOUNT NUMBER

35. CHECK NUMBER

FINALCOMPLETE PARTIAL

34. PAYMENT

39c. DATE39b. SIGNATURE AND TITLE OF CERTIFYING OFFICER

39a. I CERTIFY THIS ACCOUNT IS CORRECT AND PROPER FOR PAYMENT

32c. DATE32b. SIGNATURE OF AUTHORIZED CONTRACT AUTHORITY

REPRESENTATIVE

FINALPARTIAL

CORRECT FOR

33. AMOUNT VERIFIED 32. VOUCHER NUMBER

CONTRACT, EXCEPT AS NOTED

ACCEPTED, AND CONFORMS TO THEINSPECTEDRECEIVED

30a. QUANTITY IN COLUMN 20 HAS BEEN

29c. DATE SIGNED

28a. SIGNATURE OF OFFEROR/CONTRACTOR 29a. CONTRACT AUTHORITY (SIGNATURE OF CONTRACTING OFFICER)

28c. DATE SIGNED28b. NAME AND TITLE OF SIGNER (Type or Print) 29b. NAME OF CONTRACTING OFFICER (Type or Print)

31. SHIP NUMBER

COPIES TO ISSUING OFFICE. CONTRACTOR AGREES TO FURNISH AND DELIVER ALL ITEMS SET FORTH

OR OTHERWISE IDENTIFIED ABOVE AND ON ANY ADDITIONAL SHEETS SUBJECT TO THE TERMS AND

CONDITIONS SPECIFIED HEREIN.

25. TOTAL AWARD AMOUNT (For Contract Authority Use Only)24. ACCOUNTING AND APPROPRIATION DATA

OFFER

ITEM NO.

SUPPLIES/SERVICES

QUANTITY UNIT UNIT PRICE AMOUNT

NAME OF OFFEROR OR CONTRACTOR

2 10

CONTINUATION SHEET

REFERENCE NO. OF DOCUMENT BEING CONTINUED PAGE OF

697DCK-24-R-00497

(A) (B) (C) (D) (E) (F)

Materials required to replace Meter base, replace main distribution panel with circuit breakers, replace TVSS with a RAYVOSS TVSS, replace

Sub-panel D and D-1 with circuit breakers, replace General Duty Disconnect Switches with

Heavy Duty Disconnect Switches, (30) replace lamp fixtures located on the exterior walls of the (4) buildings, replace the lamp fixtures (16) located in the office areas, replace (40) lamp fixtures in the interior of each Bay area, used in oil building and Hurricane Shelter. Material required to replace Meter base, replace main distribution panel with circuit breakers, replace TVSS with a

RAYVOSS TVSS, replace Sub-panel D and D-1 with circuit breakers, replace General Duty Disconnect

Switches with Heavy Duty Disconnect Switches,

(30) replace lamp fixtures located on the exterior walls of the (4) buildings, replace the lamp fixtures (16) located in the office areas, replace (40) lamp fixtures in the interior of each Bay area, used in oil building and Hurricane

Shelter.

Brand Name is preferred and if any Offeror intends to use an equal alternative it must be proven compatible by supporting documentation shall be included in the Offeror’s Quote;

otherwise, the Government reserves the right to deny its acceptance.

Vendor must supply and deliver all the items in the quantities displayed and as described on the attached document

Delivery: 14 Days After Receipt Of Order

00001 Meter Base 200Amps with Main Breaker 200amp 1 EA

Electronic & IT: 03

00002 LITHONIA (ACUITY) BLT Series LED Luminaire, 2x4, 16 EA

Static, 4000

Electronic & IT: 03

00003 LITHONIA LTG CSVT L48 ALO3 MVOLT SWW3 80CRI LED 40 EA

4FT

Electronic & IT: 03

QUANTITY UNIT UNIT PRICE AMOUNT

NAME OF OFFEROR OR CONTRACTOR

3 10

CONTINUATION SHEET

REFERENCE NO. OF DOCUMENT BEING CONTINUED PAGE OF

697DCK-24-R-00497

(A) (B) (C) (D) (E) (F)

00004 LITHONIA LTG TWX2 LED ALO 40K MVOLT PE DDBTXD LED 30 EA

WALL 4000K 6500LM 120-277V TXD BRNZ

Electronic & IT: 03

00005 ABB (THOMAS AND BETTS) Blackburn® Long Barrel 20 EA

Copper Splice, Copper, Tin-Plated, 350 kcmil, Red

Electronic & IT: 03

00006 B-LINE (EATON) 4-Hole Closed Angle 4 EA

Electronic & IT: 03

00007 L. H. DOTTIE 3/8 x 2 in. Zinc Plated Steel Hex 200 EA

Head Tap Bolts

Electronic & IT: 03

00008 L. H. DOTTIE Flat Washers, Stainless Steel, 3/8 200 EA in.

Electronic & IT: 03

00009 L. H. DOTTIE 200 EA

Electronic & IT: 03

00010 Lock Washers, Zinc Plated Steel, 3/8 in. 200 EA

Electronic & IT: 03

00011 IDEAL INDUSTRIES 16 Hole Step Drill Bits 2 EA

Electronic & IT: 03

00012 3M™ Comfort Grip General Gloves, Medium 14 EA

Electronic & IT: 03

00013 KLEIN TOOLS Cable Splicer Snip Stainless Steel 4 EA

Electronic & IT: 03

00014 GREENLEE Cable Stripper, Ergonomic, 8 AWG to 1250 1 EA

QUANTITY UNIT UNIT PRICE AMOUNT

NAME OF OFFEROR OR CONTRACTOR

4 10

CONTINUATION SHEET

REFERENCE NO. OF DOCUMENT BEING CONTINUED PAGE OF

697DCK-24-R-00497

(A) (B) (C) (D) (E) (F)

MCM THHN and 0.18 to 1.57 in. dia. Cable

Electronic & IT: 03

00015 Conduit Coupling, Rigid Galvanized, Steel, 1-1/4 10 EA in.

Electronic & IT: 03

00016 Galvanized Rigid Steel Conduit, 1-1/4 in. 10 EA

Electronic & IT: 03

00017 GREENLEE Hole Saw Kit, Bi-Metal, 13 pc. 1 EA

Electronic & IT: 03

00018 Hal-Sealers™ Hole Seal, 3 pc. Gasketed, Stainless 10 EA

Steel, 3/4 in.

Electronic & IT: 03

00019 KLEIN TOOLS Large Cable Stripper (2/0-250 MCM) 1 EA

Electronic & IT: 03

00020 SQUARED (SCHNEIDER ELECTRIC) Load Centers, Main 1 EA

Lug, 225 A, 120/240 V, 1-Phase Phase, 80, 40, NEMA 1

Electronic & IT: 03

00021 SQUARED (SCHNEIDER ELECTRIC) IEC Certified QO™ 2 EA

Load Center, Type 1(Indoor), Main Breaker, 200A, Max. 42 Spaces

Electronic & IT: 03

00022 CROUSE HINDS (EATON) Myers™ Conduit Grounding 6 EA

Hub, Zinc, Insulated, Rigid/IMC Conduit, 1-1/4 in.

Electronic & IT: 03

00023 ABB (THOMAS AND BETTS) Non-Metallic Red End Cap 10 EA for use with Series B Channel

QUANTITY UNIT UNIT PRICE AMOUNT

NAME OF OFFEROR OR CONTRACTOR

5 10

CONTINUATION SHEET

REFERENCE NO. OF DOCUMENT BEING CONTINUED PAGE OF

697DCK-24-R-00497

(A) (B) (C) (D) (E) (F)

00024 BURNDY One Hole Hylug™ Code Conductor Long 20 EA

Barrel, 6 AWG

Electronic & IT: 03

00025 UNISTRUT P1000 Series Pre-Galvanized Steel Solid 10 EA

Channel, 10 ft., 12 ga.

Electronic & IT: 03

00026 KLEIN TOOLS Parallel Jaw Grip 4500 Series for ACSR 1 EA

Electronic & IT: 03

00027 SQUARED (SCHNEIDER ELECTRIC) QOB Miniature 40 EA

Circuit Breaker, Bolt On, 1 Pole, 20A, 120/240V, 10kA

Electronic & IT: 03

00028 LEVITON SmartlockPro® Slim Self-Test GFCI 10 EA

Receptacle, Weather-Resistant, 20A, 125V, Monochromatic, White

Electronic & IT: 03

00029 3M Residential Wire Connector, Tan/Yellow, 500 1 EA per Jug

Electronic & IT: 03

00030 KIDDE Smoke Alarm, White, Interconnected 10 EA

Photoelectric, 1 Lithium Ion Battery, 5.59 in.

Dia. x 1.91 in. D

Electronic & IT: 03

00031 CADDY (NVENT) Spring Steel EM-M Series 40 EA

Conduit/Pipe to Flange Clip For 1/2 or 3/4 in.

EMT or Rigid Conduit and 1/8 to 1/4 in. Flange

Electronic & IT: 03

00032 B-LINE (EATON) Square Post Base, Zinc Plated, 10 EA

3-1/2 in. H

QUANTITY UNIT UNIT PRICE AMOUNT

NAME OF OFFEROR OR CONTRACTOR

6 10

CONTINUATION SHEET

REFERENCE NO. OF DOCUMENT BEING CONTINUED PAGE OF

697DCK-24-R-00497

(A) (B) (C) (D) (E) (F)

00033 B-LINE (EATON) Square Washer, zinc plated steel, 40 EA

1/2 in.

Electronic & IT: 03

00034 ABB (THOMAS AND BETTS) Steel City® Conduit 30 EA

Bushing, Thermoplastic, Insulated 105° Rigid/IMC

Conduit, 3/4 in.

Electronic & IT: 03

00035 B-LINE (EATON) Steel Strut Beam Clamp, Zinc 20 EA

Plated, 3-3/8 in. Jaw Capacity

Electronic & IT: 03

00036 ABB (THOMAS AND BETTS) Superstrut® Series Steel 100 EA

Spring Nut With SilverGalv Finish, 3/8 in.

Electronic & IT: 03

00037 Hot-Dip Galvanized Steel 90-Degree Rigid Conduit 10 EA

Elbow, 4 in., 24 in. Radius

Electronic & IT: 03

00038 Hot-Dip Galvanized 4” Rigid Conduit 8 EA

Electronic & IT: 03

00039 ABB (THOMAS AND BETTS) Hub Connector, Zinc, 16 EA

Rigid/IMC Conduit, Insulated 105°, 4 in.

Electronic & IT: 03

00040 FLUKE Non Contact Voltage True-RMS AC/DC Clamp 1 EA

Meter with iFlex

Electronic & IT: 03

00041 SQUARED (SCHNEIDER ELECTRIC) QOB Miniature 2 EA

Circuit Breaker, Bolt On, 2 Pole, 60A, 120/240V, 10kA

QUANTITY UNIT UNIT PRICE AMOUNT

NAME OF OFFEROR OR CONTRACTOR

7 10

CONTINUATION SHEET

REFERENCE NO. OF DOCUMENT BEING CONTINUED PAGE OF

697DCK-24-R-00497

(A) (B) (C) (D) (E) (F)

00042 SQUARED (SCHNEIDER ELECTRIC) QOB Miniature 1 EA

Circuit Breaker, High Interrupting Capacity, Bolt

On, 2 Pole, 125A, 120/240 Vac, 22kA

Electronic & IT: 03

00043 SQUARED (SCHNEIDER ELECTRIC) QOB Miniature 18 EA

Circuit Breaker, High Interrupting Capacity, Bolt

On, 2 Pole, 20A, 120/240 Vac, 22kA

Electronic & IT: 03

00044 SQUARED (SCHNEIDER ELECTRIC) QOB Miniature 5 EA

Circuit Breaker, High Interrupting Capacity, Bolt

On, 2 Pole, 50A, 120/240 Vac, 22kA

Electronic & IT: 03

00045 SQUARED (SCHNEIDER ELECTRIC) Safety switch, heavy 5 EA duty, unfused, viewing window, NEMA 3R, 600V, 30A, 3 pole

Electronic & IT: 03

00046 10’ CONDUIT 3/4-EMT 3/4-STEEL THINWALL CONDUIT 40 EA

Electronic & IT: 03

00047 COOPER CROUSE-HINDS 651S 3/4 EMT CMP CONN 40 EA

Electronic & IT: 03

00048 COOPER CROUSE-HINDS 651S 3/4 EMT CMP CONN 40 EA

Electronic & IT: 03

00049 COOPER CROUSE-HINDS 201 3/4 1H STL EMT STRAP 100 EA

Electronic & IT: 03

00050 COOPER CROUSE-HINDS RAC200HD 2-IN 90D GLV CLMP 12 EA

Electronic & IT: 03

00051 THHN-1/0-SOLBLK THHN/THWN-2 SOL 600V CU 500 EA

QUANTITY UNIT UNIT PRICE AMOUNT

NAME OF OFFEROR OR CONTRACTOR

8 10

CONTINUATION SHEET

REFERENCE NO. OF DOCUMENT BEING CONTINUED PAGE OF

697DCK-24-R-00497

(A) (B) (C) (D) (E) (F)

00052 THHN-12-SOLBLK 500S THHN/THWN-2 SOL 600V CU 2 EA

Electronic & IT: 03

00053 THHN-12-SOLRED-500S THHN/THWN-2 SOL 600V CU 2 EA

Electronic & IT: 03

00054 THHN-12-SOLWHT-500S THHN/THWN-2 SOL 600V CU 2 EA

Electronic & IT: 03

00055 THHN-12-SOLGRN-500S THHN/THWN-2 SOL 600V CU 2 EA

Electronic & IT: 03

00056 THHN-350MCM-SOLBLK-250S THHN/THWN 1 EA

Electronic & IT: 03

00057 Thompson Beard 4/0 100’ 1 EA

Electronic & IT: 03

00058 TVSS Rayvoss 1 EA

Electronic & IT: 03

00059 Short-Barrel Splice: STD Barrel size, Red Color, 4 EA

350 Kcmil Max Wire Size. (Grainger Item # 3LM24

Electronic & IT: 03

00060 Grounding Bushing: Iron, Zinc Plated, 2 in Trade 10 EA

Size (Granger Item # 2AX6)

Electronic & IT: 03

00061 Grounding Bushing: Iron, Zinc Plated, 3 in Trade 10 EA

Size (Granger Item # 3LN9)

Electronic & IT: 03

00062 One-Hole Lug Compression Connector: 2 AWG Max 10 EA

Wire Size, 3/8 in Stud Size (Grainger Item #

QUANTITY UNIT UNIT PRICE AMOUNT

NAME OF OFFEROR OR CONTRACTOR

9 10

CONTINUATION SHEET

REFERENCE NO. OF DOCUMENT BEING CONTINUED PAGE OF

697DCK-24-R-00497

(A) (B) (C) (D) (E) (F)

3LM86)

Electronic & IT: 03

00063 Wedge Anchor: 6 in Overall Lg, 0.625 in Dia, 5/8” 20 EA

-11 Thread Size. (Grainger Item # 2U924)

Electronic & IT: 03

00064 Hubbell Connector: Female Connector, 400 A, Brown 2 EA

(Grainger Item # 20TR8)

Electronic & IT: 03

00065 Hubbell Connector: Female Connector, 400 A, 2 EA

Yellow (Grainger Item # 20TR57)

Electronic & IT: 03

00066 (Hubbell Connector: Female Connector, 400 A, 2 EA

Orange (Grainger Item # 20TR56)

Electronic & IT: 03

00067 Hubbell Connector: Female Connector, 400 A, Green 2 EA

(Grainger Item # 2XB37)

Electronic & IT: 03

00068 Hubbell Receptacle: For Female Connectors, 400A, 2 EA

Straight, Green, Square, Though Hole Mounting

(Grainger Item # 2XB7)

Electronic & IT: 03

00069 Hubbell Receptacle: For Female Connectors, 400A, 2 EA

Straight, Yellow, Square, Though Hole Mounting

(Grainger Item # 20TR63)

Electronic & IT: 03

00070 Hubbell Receptacle: For Female Connectors, 400A, 2 EA

Straight, Orange, Square, Though Hole Mounting

(Grainger Item # 20TR62)

QUANTITY UNIT UNIT PRICE AMOUNT

NAME OF OFFEROR OR CONTRACTOR

10 10

CONTINUATION SHEET

REFERENCE NO. OF DOCUMENT BEING CONTINUED PAGE OF

697DCK-24-R-00497

(A) (B) (C) (D) (E) (F)

00071 Hubbell Receptacle: For Female Connectors, 400A, 2 EA

Straight, Brown, Square, Though Hole Mounting

(Grainger Item # 20TR64)

Electronic & IT: 03

00072 Hubbell Single Pole Connector: 400 A Compatible 2 EA

Device Current, Green. ( Grainger Item # 20TT81)

Electronic & IT: 03

00073 Hubbell Single Pole Connector: 400 A Compatible 2 EA

Device Current, Orange. ( Grainger Item # 20TT82)

Electronic & IT: 03

00074 Hubbell Single Pole Connector: 400 A Compatible 2 EA

Device Current, Yellow. ( Grainger Item # 20TT85)

Electronic & IT: 03

00075 Hubbell Single Pole Connector: 400 A Compatible 2 EA

Device Current, Brown. ( Grainger Item # 20TT80)

Section B - Supplies or Services/Prices The contractor shall furnish and supply the item(s) set forth in the Statement of Work in accordance with the terms, conditions, and provisions set forth herein.

The offered price shall encompass all costs related to (a) direct and indirect labor, fringe benefits, overhead, G&A expenses, profit, material, equipment, other direct costs, insurance, freight, handling, transportation, inspection, testing, operation and maintenance manuals, bonds, etc., (b) federal, state, and local taxes, (c) all applicable fees permits, licenses, and (d) any miscellaneous charges.

An offeror is required to provide a price for each contract line item (CLIN). Failure to comply may result in the rejection of the subject offer. A single award shall be made. There shall be no split award. In the event that the CLIN price for any line item is materially unbalanced, the entire offer may be rejected without discussion with the offeror.

In the event of any disparity between the CLIN price and the total offered price, the CLIN price shall be deemed correct, and the total offered amount shall be revised accordingly, unless available information indicates otherwise.

Effective April 1, 1996, the Federal Aviation Administration (FAA) began operating under the new FAA Acquisition Management System. The l996 DOT Appropriation Act, Public Law 104-50, mandated that the FAA rewrite its acquisition regulations and granted legislative relief from certain laws. The Federal Acquisition Regulations (FAR), Federal Acquisition Streamlining Act of 1994, Small Business Act, and Competition in Contracting Act, are three of these laws.

(End of Clause)

The remainder of this page has been intentionally left blank.

Section C - Description/Specifications Scope of Work

The contractor shall furnish and supply the all items set forth in the Statement of Work (SOW) shown in attachment J-1.

Brand Name is preferred and if any Offeror intends to use an equal alternative it must be proven compatible by supporting documentation shall be included in the Offeror’s Submission. Otherwise, the Government reserves the right to deny its use.

Section D - Packaging and Marking

Section E - Inspection and Acceptance

3.10.4-2 INSPECTION OF SUPPLIES - FIXED PRICE (NOV 1997)

3.10.4-16 RESPONSIBILITY FOR SUPPLIES (APR 1996)

Section F - Deliveries or Performance

3.10.1-9 STOP-WORK ORDER (OCT 1996)

Section G - Contract Administration Data

Section H - Special Contract Requirements

Section I - Contract Clauses

3.1.7-2 ORGANIZATIONAL CONFLICTS OF INTEREST (JAN 2023)

3.2.2.3-29 INTEGRITY OF UNIT PRICES (JUL 2004)

3.2.2.3-83 PROHIBITION AGAINST CONTRACTING WITH INVERTED DOMESTIC

CORPORATIONS (OCT 2015)

3.2.2.7-6 PROTECTING THE GOVERNMENT'S INTEREST WHEN SUBCONTRACTING WITH

CONTRACTORS DEBARRED, SUSPENDED, OR PROPOSED FOR DEBARMENT (APR 2023)

3.2.2.7-8 DISCLOSURE OF TEAM ARRANGEMENTS (APR 2008)

3.2.2.8-1 MATERIAL REQUIREMENT (OCT 2019)

3.2.5-1 OFFICIALS NOT TO BENEFIT (APR 2021)

3.2.5-3 GRATUITIES OR GIFTS (OCT 2019)

3.2.5-4 CONTINGENT FEES (OCT 1996)

3.2.5-5 ANTI-KICKBACK PROCEDURES (OCT 2019)

3.2.5-8 WHISTLEBLOWER PROTECTION FOR CONTRACTOR EMPLOYEES (APR 2024)

3.3.1-1 PAYMENTS (JUL 2018)

3.3.1-15 ASSIGNMENT OF CLAIMS (JUL 2018)

3.3.1-17 PROMPT PAYMENT (JAN 2021)

3.3.1-20 PROVIDING ACCELERATED PAYMENT TO SMALL BUSINESS SUBCONTRACTORS

(OCT 2012)

3.3.1-34 PAYMENT BY ELECTRONIC FUNDS TRANSFER- SYSTEM FOR AWARD

MANAGEMENT (JUL 2018)

3.4.2-8 FEDERAL, STATE, AND LOCAL TAXES - FIXED PRICE CONTRACT (JUL 2019)

3.5-3 PATENT INDEMNITY (APR 2017)

3.6.2-2 CONVICT LABOR (APR 1996)

3.6.2-9 EQUAL OPPORTUNITY (JUL 2023)

3.6.2-16 NOTICE TO THE GOVERNMENT OF LABOR DISPUTES (OCT 2018)

3.6.2-39 TRAFFICKING IN PERSONS (JUL 2023)

3.6.3-14 USE OF ENVIRONMENTALLY PREFERABLE PRODUCTS (JAN 2020)

3.6.3-23 DELIVERY OF ELECTRONIC AND PAPER DOCUMENTS (JAN 2020)

3.6.4-10 RESTRICTIONS ON CERTAIN FOREIGN PURCHASES (JAN 2010)

3.6.6-1 DRUG FREE WORKPLACE (APR 2023)

3.6.6-2 SEAT BELT USE BY CONTRACTOR EMPLOYEES (APR 2023)

3.6.6-3 CONTRACTOR POLICY TO BAN TEXT MESSAGING WHILE DRIVING (JUL 2023)

3.8.9-2 PROHIBITION ON CONTRACTING FOR CERTAIN TELECOMMUNICATIONS AND

VIDEO SURVEILLANCE SERVICES OR EQUIPMENT (JUL 2023)

3.9.1-1 CONTRACT DISPUTES (JAN 2020)

3.9.1-2 PROTEST AFTER AWARD (AUG 1997)

3.10.1-7 BANKRUPTCY (APR 1996)

3.10.1-12 CHANGES - FIXED-PRICE (APR 1996)

3.10.1-25 NOVATION AND CHANGE-OF-NAME AGREEMENTS (OCT 2007)

3.10.1-28 CHANGES REQUIRED BY AMS (JAN 2024)

3.10.6-1 TERMINATION FOR CONVENIENCE OF THE GOVERNMENT (FIXED PRICE) (OCT

1996)

3.10.6-4 DEFAULT (FIXED-PRICE SUPPLY AND SERVICE) (JAN 2020)

3.1-1 CLAUSES AND PROVISIONS INCORPORATED BY REFERENCE (JUL 2019)

This screening information request (SIR) or contract, as applicable, incorporates by reference the provisions or clauses listed below with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make the full text available, or offerors and contractors may obtain the full text via Internet at:

https://fast.faa.gov/contractclauses.cfm.

(End of clause)

3.3.1-33 SYSTEM FOR AWARD MANAGEMENT (JAN 2024)

(a) Definitions. As used in this clause

"Registered in the SAM database" means that the Contractor has entered all mandatory information, including the Unique Identity Identifier (UEI) or the Electronic Funds Transfer indicator, into the SAM database.

"System for Award Management (SAM) database" means the primary Government repository for Contractor information required for the conduct of business with the Government.

"Unique Entity Identifier (UEI)" (also known as the Unique Entity ID) means a number or other identifier used to identify a specific commercial, nonprofit, or Government entity. See www.sam.gov for the designated entity for establishing unique entity identifiers.

"Electronic Funds Transfer indicator" means a 4-character suffix to the Unique Entity Identifier. This 4-character suffix may be assigned at the discretion of the business concern to establish additional SAM records for identifying alternative Electronic Funds Transfer (EFT) accounts for the same parent concern.

(b)(1) By submission of an offer, the offeror acknowledges the requirement that a prospective awardee must be registered in the SAM database prior to award, during performance, and through final payment of any contract, basic agreement, basic ordering agreement, or blanket purchasing agreement resulting from this solicitation.

(2) The offeror must enter, in Representations, Certifications and Other Statements of Offerors Section of the solicitation, the UEI or EFT indicator that identifies the offeror's name and address exactly as stated in the offer. The UEI will be used by the Contracting Officer to verify that the offeror is registered in the SAM database.

(c) If the offeror does not have a UEI, it should contact www.sam.gov directly to obtain one.

The offeror should be prepared to provide the following information:

(1) Company legal business name.

(2) Tradestyle, doing business, or other name by which your entity is commonly recognized.

(3) Company Physical Street Address, City, State, and ZIP Code.

(4) Company Mailing Address, City, State and ZIP Code (if different from physical street address).

(5) Company Telephone Number.

(6) Date the company was started.

(7) Number of employees at your location.

(8) Chief executive officer/key manager.

(9) Line of business (industry).

(10) Company Headquarters name and address (reporting relationship within your entity).

(d) If the offeror does not become registered in the SAM database in the time prescribed by the Contracting Officer, the Contracting Officer may proceed to award to the next otherwise successful registered offeror.

(e) Processing time should be taken into consideration when registering. Offerors who are not registered should consider applying for registration immediately upon receipt of this solicitation.

(f) The Contractor is responsible for the accuracy and completeness of the data within the SAM database, and for any liability resulting from the Government's reliance on inaccurate or incomplete data. To remain registered in the SAM database after the initial registration, the Contractor is required to review and update on an annual basis from the date of initial registration or subsequent updates its information in the SAM database to ensure it is current, accurate and complete. Updating information in SAM does not alter the terms and conditions of this contract and is not a substitute for a properly executed contractual document. If registered in SAM as a Service-Disabled Veteran- Owned Small Business (SDVOSB), by submission of an offer, the offeror acknowledges that they are certified as an SDVOSB under the Small Business Administration's Veteran Small Business Certification Program (VetCert).

(g)(1)(i) If a Contractor has legally changed its business name, "doing business as" name, or division name (whichever is shown on the contract), or has transferred the assets used in performing the contract, but has not completed the necessary requirements regarding novation and change-of-name agreements in AMS Procurement Guidance, the Contractor must provide the responsible Contracting Officer a minimum of one business day's written notification of its intention to:

(A) Change the name in the SAM database;

(B) Comply with the requirements of AMS regarding novation and change-of-name agreements; and

(C) Agree in writing to the timeline and procedures specified by the responsible Contracting Officer. The Contractor must provide the Contracting Officer with the notification, sufficient documentation to support the legally changed name.

(ii) If the Contractor fails to comply with the requirements of paragraph (g)(1)(i) of this clause, or fails to perform the agreement at paragraph (g)(1)(i)(C) of this clause, and, in the absence of a properly executed novation or change-of-name agreement, the SAM information that shows the Contractor to be other than the Contractor indicated in the contract will be considered to be incorrect information within the meaning of the "Suspension of Payment" paragraph of the electronic funds transfer (EFT) clause of this contract.

(2) The Contractor must not change the name or address for EFT payments or manual payments, as appropriate, in the SAM record to reflect an assignee for the purpose of assignment of claims. Assignees must be separately registered in the SAM database. Information provided to the Contractor's SAM record that indicates payments, including those made by EFT, to an ultimate recipient other than that Contractor will be considered to be incorrect information within the meaning of the "Suspension of payment" paragraph of the EFT clause of this contract.

(h) Offerors and Contractors may obtain information on registration and annual confirmation requirements via the internet at http://www.sam.gov.

(End of Clause)

3.3.2-1 FAA COST PRINCIPLES (OCT 2019)

(a) Federal Aviation Administration (FAA) "Contract Cost Principles" must be used for:

(1) The pricing of contracts, subcontracts, and modifications to contracts and subcontracts whenever cost analysis is performed; and

(2) The determination, negotiation, or allowance of costs when required by a contract clause.

(b) The Contracting Officer will incorporate the FAA cost principles and procedures in contracts with commercial organizations as the basis for:

(1) Determining reimbursable costs under

(i) Cost-reimbursement contracts and cost-reimbursement subcontracts under these contracts performed by commercial organizations and

(ii) The cost-reimbursement portion of time-and-materials contracts except when material is priced on a basis other than at cost;

(2) Negotiating indirect cost rates, when:

(i) FAA has division or corporate contract administration responsibilities;

(ii) Quick Close-out procedures are used; or

(iii) Indirect rate caps are negotiated in the contract.

(3) Proposing, negotiating, or determining costs under terminated contracts;

(4) Price revision of fixed-price incentive contracts;

(5) Price redetermination of price redetermination contracts; and

(6) Pricing changes and other contract modifications.

(c) When division or corporate contract administration responsibilities rest with another Government agency, the FAA will apply the cost principles of the administering agency for the determination or negotiation of indirect rates not covered by (2)(ii) or (2)(iii) above.

(d) Upon request, the Contracting Officer will provide a copy of the FAA "Contract Cost Principles."

(End of clause)

3.6.4-2 BUY AMERICAN ACT - SUPPLIES (JAN 2024)

(a) The Buy American Act (41 U.S.C. §§ 8301-8305) and Executive Order No. 10582, dated December 17, 1954, as amended, provide that the Government gives preference to domestic end products.

(b) Definitions:

(1) "Components," as used in this clause, means those articles, materials, and supplies incorporated directly into the end products.

(2) "Cost of components" means-

(A) For components purchased by the Contractor, the acquisition cost, including transportation costs to the place of incorporation into the end product (whether or not such costs are paid to a domestic firm), and any applicable duty (whether or not a duty-free entry certificate is issued); or

(B) For components manufactured by the Contractor, all costs associated with the manufacture of the component, including transportation costs as described in paragraph (A) of this definition, plus allocable overhead costs, but excluding profit. Cost of components does not include any costs associated with the manufacture of the end product.

(3) "Domestic end product," as used in this clause for an end product that does not consist wholly or predominantly of iron or steel or a combination of both, means

(A) an unmanufactured end product mined or produced in the United States, or

(B) an end product manufactured in the United States, if

(i) the cost of its components mined, produced, or manufactured in the United States exceeds 60 percent of the cost of all its components, except that the percentage will be 65 percent for items delivered in calendar years 2024 through 2028 and 75 percent for items delivered starting in calendar year 2029. Components of unknown origin are treated as foreign. Scrap generated, collected, and prepared for processing in the United States is considered domestic, or

(ii) the end product is a COTS item, or

For an end product that consists wholly or predominantly of iron or steel or a combination of both, an end product manufactured in the United States, if the cost of foreign iron and steel constitutes less than 5 percent of the cost of all the components used in the end product. The cost of foreign iron and steel includes but is not limited to the cost of foreign iron or steel mill products (such as bar, billet, slab, wire, plate, or sheet), castings, or forgings utilized in the manufacture of the end product and a good faith estimate of the cost of all foreign iron or steel components excluding COTS fasteners. Iron or steel components of unknown origin are treated as foreign. If the end product contains multiple components, the cost of all the materials used in such end product is calculated in accordance with the definition of "cost of components".

(4) "End products," as used in this clause, means those articles, materials, and supplies to be acquired for public use under this contract.

(5) "Fastener" means a hardware device that mechanically joins or affixes two or more objects together.

Examples of fasteners are nuts, bolts, pins, rivets, nails, clips, and screws.

(6) "Foreign End Product" means an end product other than a domestic end product.

(7) "Foreign offer," as used in this clause, means an offered price for a foreign end product, including transportation to destination and duty (whether or not a duty free entry certificate is issued).

(8) "Predominantly of iron or steel or a combination of both" means that the cost of the iron and steel content exceeds 50 percent of the total cost of all its components. The cost of iron and steel is the cost of the iron or steel mill products (such as bar, billet, slab, wire, plate, or sheet), castings, or forgings utilized in the manufacture of the product and a good faith estimate of the cost of iron or steel components excluding COTS fasteners.

(9) "Steel" means an alloy that includes at least 50 percent iron, between 0.02 and 2 percent carbon, and may include other elements.

(c) The Contractor must deliver only domestic end products, except those--

(1) For use outside the United States;

(2) That the FAA determines are not mined, produced, or manufactured in the United States in sufficient and reasonably available commercial quantities and of a satisfactory quality. In accordance with AMS Guidance T3.6.4A.3.c (3) (c), such determinations of non-availability must also be approved by the FAA Acquisition Executive (FAE) and reviewed by the Office of Management and Budget (OMB) Made in America Office (MIAO);

(3) For which the FAA determines that domestic preference would be inconsistent with the public interest;

or

(4) For which the FAA determines the cost to be unreasonable.

(A) Unless the FAA determines otherwise, the offered price of a domestic end product is unreasonable when the lowest acceptable domestic offer exceeds the lowest acceptable foreign offer, inclusive of duty, by:

(i) More than 20 percent, if a domestic offer is from a large business that is not a labor surplus area concern; or

(ii) More than 30 percent, if a domestic offer is from a small business concern or any labor surplus area concern.

(B) The evaluation in subparagraph (A) above will be applied on an item by item basis or to any group of items on which award may be made, as specifically provided by the screening information request.

(C) If an award of more than $250,000 would be made to a domestic concern if the 30 percent factor were applied, but not if the 20 percent factor were applied, the FAA will decide whether award to the domestic concern would involve unreasonable cost.

(End of clause)

3.8.9-4 PROHIBITION ON CONTRACTING FOR HARDWARE, SOFTWARE, AND SERVICES

DEVELOPED OR PROVIDED BY KASPERSKY LAB ENTITIES (JAN 2024)

(a) Definitions. As used in this clause-

Kaspersky Lab covered article means any hardware, software, or service that-

(1) Is developed or provided by a Kaspersky Lab covered entity;

(2) Includes any hardware, software, or service developed or provided in whole or in part by a Kaspersky Lab covered entity; or

(3) Contains components using any hardware or software developed in whole or in part by a Kaspersky Lab covered entity.

Kaspersky Lab covered entity means-

(1) Kaspersky Lab;

(2) Any successor entity to Kaspersky Lab, including any change in name, e.g. "Kaspersky";

(3) Any entity that controls, is controlled by, or is under common control with Kaspersky Lab; or

(4) Any entity of which Kaspersky Lab has a majority ownership.

(b) Prohibition. Section 1634 of Division A of the National Defense Authorization Act for Fiscal Year 2018 (Pub. L. 115-91) prohibits Government use of any Kaspersky Lab covered article. The Contractor is prohibited from-

(1) Providing any Kaspersky Lab covered article that the Government will use; and

(2) Using any Kaspersky Lab covered article in the development of data or deliverables first produced in the performance of the contract.

(c) Reporting requirement.

(1) In the event the Contractor identifies a Kaspersky Lab covered article provided to the Government during contract performance, or the Contractor is notified of such by a subcontractor at any tier or any other source, the Contractor must report this in writing to the Contracting Officer. For indefinite delivery contracts, the Contractor must report this in writing to the Contracting Officer for the indefinite delivery contract and the Contracting Officer(s) for any affected order.

(2) The Contractor must report the following information pursuant to paragraph (c) (1) of this clause:

(i) Within 3 business days from the date of such identification or notification: the contract number; the order number(s), if applicable; supplier name; brand; model number (Original Equipment Manufacturer (OEM) number, manufacturer part number, or wholesaler number); item description; and any readily available information about mitigation actions undertaken or recommended.

(ii) Within 10 business days of submitting the report pursuant to paragraph (c)(1) of this clause: any further available information about mitigation actions undertaken or recommended. In addition, the Contractor must describe the efforts it undertook to prevent use or submission of a Kaspersky Lab covered article, any reasons that led to the use or submission of the Kaspersky Lab covered article, and any additional efforts that will be incorporated to prevent future use or submission of Kaspersky Lab covered articles.

(d) Subcontracts. The Contractor must insert the substance of this clause, including this paragraph (d), in all subcontracts including subcontracts for the acquisition of commercial products or commercial services.

(End of clause)

3.8.9-5 PROHIBITION ON USING BYTEDANCE COVERED APPLICATIONS INCLUDING

TIKTOK (JUL 2023)

(a) Definitions. As used in this clause-

"Covered Application" means the social networking service TikTok or any successor application or service developed or provided by ByteDance Limited or an entity owned by ByteDance Limited.

"Information technology," as defined in 40 U.S.C. 11101(6)-

(1) Means any equipment, or interconnected system or subsystem of equipment, used in the automatic acquisition, storage, analysis, evaluation, manipulation, management, movement, control, display, switching, interchange, transmission, or reception of data or information by the executive agency, if the equipment is used by the executive agency directly or is used by a Contractor under a contract with the executive agency that requires the use-

(i) Of that equipment; or

(ii) Of that equipment to a significant extent in the performance of a service or the furnishing of a product;

(2) Includes computers, ancillary equipment (including imaging peripherals, input, output, and storage devices necessary for security and surveillance), peripheral equipment designed to be controlled by the central processing unit of a computer, software, firmware and similar procedures, services (including support services), and related resources; but

(3) Does not include any equipment acquired by a Federal Contractor incidental to a Federal contract.

(b) Prohibition. Section 102 of Division R of the Consolidated Appropriations Act, 2023 (Pub. L. 117- 328), the No TikTok on Government Devices Act, and its implementing guidance under Office of Management and Budget (OMB) Memorandum M-23-13, dated February 27, 2023, "No TikTok on Government Devices" Implementation Guidance, collectively prohibit the presence or use of a covered application on executive agency information technology, including certain equipment used by Federal contractors. The Contractor is prohibited from having or using a covered application on any information technology owned or managed by the Government, or on any information technology used or provided by the Contractor under this contract, including equipment provided by the Contractor's employees; however, this prohibition does not apply if the Contracting Officer provides written notification to the Contractor that a waiver has been granted in accordance with AMS Guidance T3.8.9C.3.c.(2).

(c) Subcontracts. The Contractor must insert the substance of this clause, including this paragraph (c), in all subcontracts including subcontracts for the acquisition of commercial products or commercial services.

(End of clause)

3.13-16 RECORDS MANAGEMENT (OCT 2023)

(a) Definitions.

Federal record as defined in 44 U.S.C. § 3301, means all recorded information, regardless of form or characteristics, made or received by a Federal agency under Federal law or in connection with the transaction of public business and preserved or appropriate for preservation by that agency or its legitimate successor as evidence of the organization, functions, policies, decisions, procedures, operations, or other activities of the United States Government or because of the informational value of data in them. The term Federal record:

(1)Includes all FAA records.

(2)Does not include personal materials.

(3)Applies to records created, received, or maintained by Contractors pursuant to a FAA contract.

(4) May include deliverables and documentation associated with deliverables.

(b) Requirements.

(1) Compliance. The contractor must comply with all applicable records management laws and regulations, as well as National Archives and Records Administration (NARA) records policies, including but not limited to the Federal Records Act (44 U.S.C. chapters 21, 29, 31, 33), NARA regulations at 36 CFR Chapter XII Subchapter B, and those policies associated with the safeguarding of records covered by Privacy Act of 1974 (5 U.S.C. 552a), to the extent that the Privacy Act applies to any records maintained by the Contractor. These policies include the preservation of all Federal records, regardless of form or characteristics, mode of transmission, or state of completion.

(2) Applicability. All data created for Government use and delivered to, or falling under, the legal control of the Government, are Federal records subject to the provisions of 44 U.S.C. chapters 21, 29, 31, and 33. Such Federal records must be managed and scheduled for disposition only as permitted by the Federal Records Act, relevant statute or regulation, and FAA Order 1350.14 Records Management" at https://www.faa.gov/documentLibrary/media/Order/FAA_1350.14B.pdf.

(3) Records maintenance. While in Contractor's custody, the Contractor is responsible for preventing the alienation or unauthorized destruction of FAA records, including all forms of mutilation. Records may not be removed from the legal custody of FAA or destroyed except in accordance with the provisions of the agency records schedules and with the written concurrence of the FAA Agency Records Officer (ARO) (or the ARO's designate) and Contracting Officer, as appropriate. Willful and unlawful destruction, damage or alienation of Federal records is subject to the fines and penalties imposed by 18 U.S.C. 2701. In the event of any unlawful or accidental removal, defacing, alteration, or destruction of records, the Contractor must report the event to the Contracting Officer in accordance with 36 CFR 1230, Unlawful or Accidental Removal, Defacing, Alteration, or Destruction of Records, for reporting to NARA by FAA Records Management. Electronic records and associated metadata must be accompanied by sufficient technical documentation to permit understanding and use of the records and data.

(4) Unauthorized disclosure. The Contractor must notify the Contracting Officer within 2 (two) hours of discovery of any inadvertent or unauthorized disclosures of information, data, documentary materials, records or equipment.

Disclosure of non-public information is limited to authorized personnel with a need-to-know as described in the contract. The Contractor must ensure that the appropriate personnel, administrative, technical, and physical safeguards are established to ensure the security and confidentiality of this information, data, documentary material, records and/or equipment is properly protected. The Contractor must not remove material from Government facilities or systems, or facilities or systems operated or maintained on the Government's behalf, without the express written permission of the FAA ARO (or the ARO's designate) and the Contracting Officer. Destruction of records is expressly prohibited unless in accordance with the contract.

(c) Records management contracts - where the contractor is required to design, develop, and/or operate a system of records, the following additional requirements apply:

During the contract, the FAA ARO (or ARO's designate) has the right to inspect where the records are stored (digitally or paper records) in order to ensure they are properly protected from the elements and/or loss. This inspection must be coordinated through the Contracting Officer or the Contracting Officer's Representative. The contractor must be provided 30 calendar days' notice of such inspections. This clause may be tailored to provide for a different notice period. Additional details regarding such inspections consistent with this clause may be specified in the Statement of Work.

For contracts where the contractor is responsible for managing FAA records, when the records are no longer required or at the completion of the contract, the records must be returned to FAA control. Items returned to the FAA must be hand carried, mailed, or securely electronically transmitted to the Contracting Officer or address indicated in the contract.

(d) Non-public information. The Contractor must not create or maintain any records containing any non-public FAA information that are not specifically tied to or authorized by the contract.

(e) Ownership. Consistent with all applicable data rights clauses in this contract, the FAA is the sole owner of the rights to all data and records produced as part of this contract. All deliverables under the contract are the property of the U.S. Government for which FAA will have unlimited rights to use, dispose of, or disclose such data contained therein as it determines to be in the public interest. Any Contractor rights in the data or deliverables must be identified as required by applicable data rights clauses in this contract.

(f) Notification of third party access requests. The Contractor must notify the Contracting Officer promptly of any requests from a third party for access to Federal records, including any warrants, seizures, or subpoenas it receives, including those from another Federal, State, or local agency. The Contractor must cooperate with the Contracting Officer to take all measures to protect Federal records, from any unauthorized disclosure.

(g)Training. All Contractor employees assigned to this contract who create, work with, or otherwise handle records are required to take FAA-provided records management training upon starting under the contract and annually thereafter as per the FAA Electronic Learning Management System (eLMS). If the contractor does not have access to eLMS, the contractor is to contact the Contracting Officer or Contracting Officer's Representative (COR) who will advise the ARO who will in turn make arrangements to ensure the contractor has access. The Contractor is responsible for confirming to the Contracting Officer in an annual report due by September 30 of each year under the contract that training, including initial training and annual refresher training, has been completed in accordance with agency policies. This annual report must list the employee names and dates of initial or annual refresher training.

(h) Agency Records Officer (ARO) - regarding clause provisions above that cite the ARO or designate, information as to the name of the ARO or the ARO designate for particular locations outside FAA Headquarters may be obtained from the FAA Records and Information Management Team (RIM) at 9-faa-records-management-program@faa.gov.

(i) Subcontractor flowdown requirements. The Contractor must incorporate the substance of this clause, its terms and requirements including this paragraph (i), in all subcontracts under this contract.

(End of clause)

3.18-1 BIPARTISAN INFRASTRUCTURE LAW - REPORTING REQUIREMENTS (OCT 2022)

(a) Definitions. As used in this clause -

"Bipartisan Infrastructure Law (BIL)" means the Infrastructure Investment and Jobs Act, Public Law No. 117-58.

"Contract" means a mutually binding legal relationship obligating the seller to furnish the supplies or services (including construction) and the buyer to pay for them. It includes all types of commitments that obligate the Government to an expenditure of appropriated funds and that, except as otherwise authorized, are in writing. In addition to bilateral instruments, contracts include (but are not limited to) awards and notices of awards; job orders or task letters issued under basic ordering agreements; letter contracts; orders, such as purchase orders, under which the contract becomes effective by written acceptance or performance; and bilateral contract modifications. Contracts do not include grants and cooperative agreements covered by 31 U.S.C. 6301, et seq.

"First-tier Subcontract" means a subcontract awarded directly by the Contractor for the purpose of acquiring supplies or services (including construction) for performance of a contract funded by the BIL.

"Total Compensation" means the complete pay package of Contractor employees, including all forms of money, benefits, services, and in-kind payments, consistent with the regulations of the Securities and Exchange Commission at 17 CFR 229.402.

(b) This contract requires products and services that are funded under the BIL. Therefore, pursuant to AMS Guidance T3.18 "Bipartisan Infrastructure Law" the Contractor is required to report on its use of BIL funds under this Contract.

(c) Reports from the Contractor for all work funded, in whole or in part, by the BIL, are due on a standardized template that must be submitted quarterly and at the completion of the contract to the email address indicated on the standardized BIL reporting template included as a data requirement under the contract. This standardized template will be known as the "Uniform Bipartisan Infrastructure Law (BIL) Data Report" form.

(d) The Contractor must complete the Uniform BIL Data Report and provide the following information:

(1) The Contractor's point of contact

(2) The Contractor's legal business name and address

(3) The Contractor's business socio-economic status

(4) The Government contract and/or order number

(5) Modification number if applicable

(6) Total obligated to date for performance of the contract requirement

(7) A list of applicable Job Control Number(s) (JCNs) complete with city, state, and nine-digit zip code of the JCN location, and the dollar value of the work to be performed at that specific JCN location.

(8) If applicable, a list identifying all non-domestic purchases associated with this contract/order/modification by associated JCN, a description of each non-domestic product/technology to include manufacturer and model number, and the dollar value of the non-domestic product/technology.

(9) If applicable, by JCN, a list identifying all installed Energy Savings initiatives by associated JCN and a description of the product/technology that is to be removed/replaced to include manufacturer, model number, size, age, etc.

(10) If applicable, for each JCN, a list identifying the total dollars to date awarded on all first-tier subcontracts by socio-economic category.

(11) By JCN a list identifying the number of jobs created expressed as "full-time equivalent" which must include full-time, part-time, temporary, and permanent positions as expressed as a "person-year," for the Contractor and all first tier subcontractors. Any jobs created with funding other than BIL funding are not to be included in the numbers.

(End of clause)

Section J - List of Documents, Exhibits and Other Attachments Attachment

Number Title Date

J-1 Statement of Work 07/08/2024 J-2 Uniform_Bipartisan_Infrastructure_Law_Report 04/01/2023

Section K - Representations, Certifications, and Other Statements of Bidders

3.2.2.3-82 PROHIBITION ON CONDUCTING RESTRICTED BUSINESS OPERATIONS IN SUDAN

- CERTIFICATION (JUL 2012)

3.2.5-7 DISCLOSURE REGARDING PAYMENTS TO INFLUENCE CERTAIN FEDERAL

TRANSACTIONS (JAN 2022)

3.2.2.3-2 MINIMUM OFFER ACCEPTANCE PERIOD (APR 2024)

(a) 'Acceptance period,' as used in this provision, means the number of calendar days the FAA has to award a contract from the date the SIR specifies for receiving offers.

(b) This provision supersedes any language about the acceptance period appearing elsewhere in this SIR.

(c) The FAA requires a minimum acceptance period of 60 calendar days.

(d) The offeror may specify a longer acceptance period than the period shown in paragraph (c). To specify a longer period, fill in the blank: The offeror allows the following acceptance period: _____ calendar days.

(e) The FAA may reject an offer allowing less than the FAA's minimum acceptance period.

(f) The offeror agrees to fulfill the offer completely if the FAA accepts the offer in writing within:

(1) The acceptance period stated in paragraph (c) of this provision; or

(2) Any longer acceptance period stated in paragraph (d) of this provision.

(End of provision)

3.2.2.3-81 PROHIBITION AGAINST CONTRACTING WITH INVERTED DOMESTIC

CORPORATIONS-REPRESENTATION (JAN 2024)

(a) Definition: "Inverted Domestic Corporation" and "subsidiary" are defined in AMS clause…