Amendment 0002.pdf

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT

1. CONTRACT ID CODE

5. PROJECT NO. (If applicable)2. AMENDMENT/MODIFICATION NO. 3. EFFECTIVE DATE 4. REQUISITION/PURCHASE REQ.NO.

PAGE OF PAGES

6. ISSUED BY CODE 7. ADMINISTERED BY (If other than Item 6)

8. NAME AND ADDRESS OF CONTRACTOR (No., street, county, State and ZIP Code)

CODE

9A. AMENDMENT OF SOLICITATION NO.

9B. DATED (SEE ITEM 11)

10A. MODIFICATION OF CONTRACT/ORDER NO.

10B. DATED (SEE ITEM 13)

CODE FACILITY CODE

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

The above numbered solicitation is amended as set forth in Item 14. The hour and date specified for receipt of Offers

Offers must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended , by one of the following methods: (a) By completing

Items 8 and 15, and returning is extended, is not extended.

12. ACCOUNTING AND APPROPRIATION DATA (If required.)

13. THIS ITEM APPLIES ONLY TO MODIFICATIONS OF CONTRACTS/ORDERS. IT MODIFIES THE CONTRACT/ORDER NO. AS DESCRIBED IN ITEM 14.

(x) A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE CONTRACT

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO THE AUTHORITY OF:

D. OTHER (Specify type of modification and authority) appropriation date, etc.) SET FORTH IN ITEM 14.

E. IMPORTANT: Contractor is not, is required to sign this document and return

ORDER NO. IN ITEM 10A.

1 15

0002 12/06/2018

FEDERAL AVIATION ADMINISTRATION

AAQ-500 - REGIONAL ACQUISITIONS

2200 S. 216TH STREET

DES MOINES WA 98198-6547

AAQ530ANM-AFN

x

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

separate letter or telegram which includes a reference to the solicitation and amendment number. FAILURE OF YOUR ACKNOWLEDGEMENT TO BE RECEIVED AT

THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted , such change may be made by telegram or letter, provided each telegram or letter makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted ; or (c) By ___________ 1 x x

697DCK-19-R-00046

1 copies to the issuing office.

11/08/2018

(x)

See attachment pages.

15A. NAME AND TITLE OF SIGNER (Type or print)

15C. DATE SIGNED 16B. CONTRACT AUTHORITY 15B. CONTRACTOR/OFFEROR 16C. DATE SIGNED

(Signature of person authorized to sign) (Signature of Contracting Officer)

16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)

Except as provided herein, all terms and conditions of the document referenced in Item 9 A or 10A, as heretofore changed, remains unchanged and in full force and effect .

Attachment Page

14. Description of Amendment (continued): It has been determined necessary and in the best interest of the government to amend the solicitation to provide responses to Requests for Information (RFIs); update the associated wage determination; provide a list of site visit attendees to all prospective offerors; and extend the due date and time for offers.

14.1. The following responses to RFIs are hereby incorporated into the solicitation and will be incorporated into any subsequent award:

RFI #1: The drawings do not provide motor nameplate information for AHU-

201,202,203,204,205A,205B. Can the FAA provide complete nameplate information for each AHU motor? If not, another site walk will be needed and each AHU will need to be shut down temporarily to view each motor assembly please.

Response: Motor nameplate information is attached.

RFI #2: Have you or anyone from the site been in contact with Schneider Electric for this? “Coordinate the disconnection, and reconnection of all controls with Schneider Electric. The controls will remain as they currently exist.

But the new VFD, and actuators, etc. shall work with the existing controls.

Minor programming may be required.” Also, is this only for the AHUs related to this scope or is there additional controls they need to figure out?

Response: Schneider Electric is currently working with the facility for our phase two design. That project will not start until August; therefore, the awardee will need to contact Schneider Electric directly. FAA can facilitate. There are no other controls to figure out.

14.2. The attached wage determination (CO180030, dated: 11/30/18) hereby supersedes and replaces the previous wage determination provided with the original solicitation. The attached wage determination will be incorporated into any subsequent award.

14.3. The pre-bid site visit attendee list is included with this amendment for reference.

14.4. The due date and time for offers is hereby extended. Offers are due no later than 5:00 p.m. Pacific Time on Tuesday, December 18, 2018.

All other terms and conditions of the original solicitation remain unchanged (as amended). Firms interested in offering shall submit a signed copy of Amendment 0001 and Amendment 0002 with the firm’s business and technical proposals as directed in solicitation sections L and M. Offers that do not include a signed/acknowledged copy of both amendments may be deemed non-responsive.

List of Attachments:

1. AHU Nameplate Pictures

2. Wage Determination – CO180030 – 11/30/18

3. Pre-bid Site Visit Attendee List

AHU 201-204

AHU 201-204

AHU 205A and AHU 205B

AHU 205A and AHU 205B

12/6/2018 https://www.wdol.gov/wdol/scafiles/davisbacon/CO30.dvb?v=6 https://www.wdol.gov/wdol/scafiles/davisbacon/CO30.dvb?v=6 1/6

General Decision Number: CO180030 11/30/2018 CO30

Superseded General Decision Number: CO20170030

State: Colorado

Construction Type: Building

County: Denver County in Colorado.

BUILDING CONSTRUCTION PROJECTS (does not include single family homes or apartments up to and including 4 stories).

Note: Under Executive Order (EO) 13658, an hourly minimum wage of $10.35 for calendar year 2018 applies to all contracts subject to the Davis-Bacon Act for which the contract is awarded (and any solicitation was issued) on or after January 1, 2015. If this contract is covered by the EO, the contractor must pay all workers in any classification listed on this wage determination at least $10.35 per hour (or the applicable wage rate listed on this wage determination, if it is higher) for all hours spent performing on the contract in calendar year 2018. The EO minimum wage rate will be adjusted annually.

Please note that this EO applies to the above-mentioned types of contracts entered into by the federal government that are subject to the Davis-Bacon Act itself, but it does not apply to contracts subject only to the Davis-Bacon Related Acts, including those set forth at 29 CFR 5.1(a)(2)-(60). Additional information on contractor requirements and worker protections under the EO is available at www.dol.gov/whd/govcontracts.

Modification Number Publication Date 0 01/05/2018 1 01/12/2018 2 03/02/2018 3 07/13/2018 4 08/03/2018 5 08/31/2018 6 11/30/2018

ASBE0028-002 07/01/2018

Rates Fringes

ASBESTOS WORKER/HEAT & FROST

INSULATOR - MECHANICAL (Duct, Pipe & Mechanical System Insulation)......................$ 31.73 14.23

* CARP0055-002 11/01/2018

Rates Fringes

CARPENTER (Drywall Hanging Only)............................$ 29.45 9.64

CARP1607-001 06/01/2018

Rates Fringes

MILLWRIGHT.......................$ 31.38 15.63

ELEC0068-012 06/01/2018

https://www.wdol.gov/wdol/scafiles/davisbacon/CO30.dvb?v=6 2/6

Rates Fringes

ELECTRICIAN (Includes Low Voltage Wiring)..................$ 35.80 15.45

ELEV0025-001 01/01/2018

Rates Fringes

ELEVATOR MECHANIC................$ 43.66 32.645

FOOTNOTE:

a.Vacation: 6%/under 5 years based on regular hourly rate for all hours worked. 8%/over 5 years based on regular hourly rate for all hours worked.

b. PAID HOLIDAYS: New Year's Day; Memorial Day; Independence Day; Labor Day; Veterans' Day; Thanksgiving Day; the Friday after Thanksgiving Day; and Christmas Day.

ENGI0009-017 05/01/2017

Rates Fringes

POWER EQUIPMENT OPERATOR

(Crane) 141 tons and over...........$ 29.82 10.10 50 tons and under...........$ 27.75 10.10 51 to 90 tons...............$ 27.92 10.10 91 to 140 tons..............$ 28.55 10.10

IRON0024-009 06/01/2018

Rates Fringes

IRONWORKER, ORNAMENTAL...........$ 27.45 12.34

IRON0024-010 06/01/2018

Rates Fringes

IRONWORKER, STRUCTURAL...........$ 27.45 12.34

PAIN0079-006 08/01/2017

Rates Fringes

PAINTER (Brush, Roller and Spray; Excludes Drywall Finishing/Taping)................$ 20.50 8.41

PAIN0079-007 08/01/2017

Rates Fringes

DRYWALL FINISHER/TAPER...........$ 21.20 8.41

PAIN0419-001 07/01/2016

Rates Fringes

SOFT FLOOR LAYER (Vinyl and Carpet)..........................$ 20.00 10.83 https://www.wdol.gov/wdol/scafiles/davisbacon/CO30.dvb?v=6 3/6

PAIN0930-002 07/01/2018

Rates Fringes

GLAZIER..........................$ 31.52 10.13

PLUM0003-009 06/01/2018

Rates Fringes

PLUMBER (Excludes HVAC Duct, Pipe and Unit Installation)......$ 35.48 15.94

PLUM0208-008 06/01/2018

Rates Fringes

PIPEFITTER (Includes HVAC Pipe and Unit Installation;

Excludes HVAC Duct Installation)....................$ 37.55 14.95

SFCO0669-002 04/01/2017

Rates Fringes

SPRINKLER FITTER (Fire Sprinklers)......................$ 36.73 20.47

SHEE0009-004 07/01/2018

Rates Fringes

SHEET METAL WORKER (Includes HVAC Duct Installation;

Excludes HVAC Pipe and Unit Installation)....................$ 34.02 17.49

SUCO2013-006 07/31/2015

Rates Fringes

BRICKLAYER.......................$ 21.96 0.00

CARPENTER (Acoustical Ceiling Installation Only)...............$ 22.40 4.85

CARPENTER (Metal Stud Installation Only)...............$ 17.68 0.00

CARPENTER, Excludes Acoustical Ceiling Installation, Drywall Hanging, and Metal Stud Installation.....................$ 21.09 6.31

CEMENT MASON/CONCRETE FINISHER...$ 20.09 7.03

LABORER: Common or General......$ 14.49 5.22

LABORER: Mason Tender - Brick...$ 15.99 0.00

LABORER: Mason Tender - Cement/Concrete..................$ 16.00 0.00 https://www.wdol.gov/wdol/scafiles/davisbacon/CO30.dvb?v=6 4/6

LABORER: Pipelayer..............$ 16.96 3.68

OPERATOR:

Backhoe/Excavator/Trackhoe.......$ 20.78 5.78

OPERATOR: Bobcat/Skid Steer/Skid Loader................$ 19.10 3.89

OPERATOR: Grader/Blade..........$ 21.50 0.00

ROOFER...........................$ 16.56 0.00

TRUCK DRIVER: Dump Truck........$ 17.34 0.00

WATERPROOFER.....................$ 12.71 0.00

WELDERS - Receive rate prescribed for craft performing operation to which welding is incidental.

Note: Executive Order (EO) 13706, Establishing Paid Sick Leave for Federal Contractors applies to all contracts subject to the Davis-Bacon Act for which the contract is awarded (and any solicitation was issued) on or after January 1, 2017. If this contract is covered by the EO, the contractor must provide employees with 1 hour of paid sick leave for every 30 hours they work, up to 56 hours of paid sick leave each year.

Employees must be permitted to use paid sick leave for their own illness, injury or other health-related needs, including preventive care; to assist a family member (or person who is like family to the employee) who is ill, injured, or has other health-related needs, including preventive care; or for reasons resulting from, or to assist a family member (or person who is like family to the employee) who is a victim of, domestic violence, sexual assault, or stalking. Additional information on contractor requirements and worker protections under the EO is available at www.dol.gov/whd/govcontracts.

Unlisted classifications needed for work not included within the scope of the classifications listed may be added after award only as provided in the labor standards contract clauses (29CFR 5.5 (a) (1) (ii)).

The body of each wage determination lists the classification and wage rates that have been found to be prevailing for the cited type(s) of construction in the area covered by the wage determination. The classifications are listed in alphabetical order of "identifiers" that indicate whether the particular rate is a union rate (current union negotiated rate for local), a survey rate (weighted average rate) or a union average rate (weighted union average rate).

Union Rate Identifiers

A four letter classification abbreviation identifier enclosed in dotted lines beginning with characters other than "SU" or "UAVG" denotes that the union classification and rate were prevailing for that classification in the survey. Example:

PLUM0198-005 07/01/2014. PLUM is an abbreviation identifier of https://www.wdol.gov/wdol/scafiles/davisbacon/CO30.dvb?v=6 5/6 the union which prevailed in the survey for this classification, which in this example would be Plumbers. 0198 indicates the local union number or district council number where applicable, i.e., Plumbers Local 0198. The next number, 005 in the example, is an internal number used in processing the wage determination. 07/01/2014 is the effective date of the most current negotiated rate, which in this example is July 1, 2014.

Union prevailing wage rates are updated to reflect all rate changes in the collective bargaining agreement (CBA) governing this classification and rate.

Survey Rate Identifiers

Classifications listed under the "SU" identifier indicate that no one rate prevailed for this classification in the survey and the published rate is derived by computing a weighted average rate based on all the rates reported in the survey for that classification. As this weighted average rate includes all rates reported in the survey, it may include both union and non-union rates. Example: SULA2012-007 5/13/2014. SU indicates the rates are survey rates based on a weighted average calculation of rates and are not majority rates. LA indicates the State of Louisiana. 2012 is the year of survey on which these classifications and rates are based. The next number, 007 in the example, is an internal number used in producing the wage determination. 5/13/2014 indicates the survey completion date for the classifications and rates under that identifier.

Survey wage rates are not updated and remain in effect until a new survey is conducted.

Union Average Rate Identifiers

Classification(s) listed under the UAVG identifier indicate that no single majority rate prevailed for those classifications; however, 100% of the data reported for the classifications was union data. EXAMPLE: UAVG-OH-0010 08/29/2014. UAVG indicates that the rate is a weighted union average rate. OH indicates the state. The next number, 0010 in the example, is an internal number used in producing the wage determination. 08/29/2014 indicates the survey completion date for the classifications and rates under that identifier.

A UAVG rate will be updated once a year, usually in January of each year, to reflect a weighted average of the current negotiated/CBA rate of the union locals from which the rate is based.

WAGE DETERMINATION APPEALS PROCESS

1.) Has there been an initial decision in the matter? This can be:

* an existing published wage determination

* a survey underlying a wage determination

* a Wage and Hour Division letter setting forth a position on a wage determination matter

* a conformance (additional classification and rate) ruling https://www.wdol.gov/wdol/scafiles/davisbacon/CO30.dvb?v=6 6/6

On survey related matters, initial contact, including requests for summaries of surveys, should be with the Wage and Hour Regional Office for the area in which the survey was conducted because those Regional Offices have responsibility for the Davis-Bacon survey program. If the response from this initial contact is not satisfactory, then the process described in 2.)

and 3.) should be followed.

With regard to any other matter not yet ripe for the formal process described here, initial contact should be with the Branch of Construction Wage Determinations. Write to:

Branch of Construction Wage Determinations Wage and Hour Division U.S. Department of Labor 200 Constitution Avenue, N.W.

Washington, DC 20210

2.) If the answer to the question in 1.) is yes, then an interested party (those affected by the action) can request review and reconsideration from the Wage and Hour Administrator (See 29 CFR Part 1.8 and 29 CFR Part 7). Write to:

Wage and Hour Administrator U.S. Department of Labor 200 Constitution Avenue, N.W.

Washington, DC 20210

The request should be accompanied by a full statement of the interested party's position and by any information (wage payment data, project description, area practice material, etc.) that the requestor considers relevant to the issue.

3.) If the decision of the Administrator is not favorable, an interested party may appeal directly to the Administrative Review Board (formerly the Wage Appeals Board). Write to:

Administrative Review Board U.S. Department of Labor 200 Constitution Avenue, N.W.

Washington, DC 20210

4.) All decisions by the Administrative Review Board are final.

END OF GENERAL DECISION

Site Visit Attendee List