61661204 DATA.pdf
PDF 100 KB Posted
- Attached to
- METALLIC PIPE
- Solicitation number
- SPMYM226Q7794
About this file
This is a Material Ordering Data sheet for copper-nickel alloy tubing in accordance with military specification MIL-T-16420K. The document specifies the procurement requirements for seamless and welded copper-nickel alloy tube (Copper Alloy Numbers 715 and 706) with the following technical specifications: 70/30 composition, annealed temper, Type II, Class 50, and Grade 2. The required tube dimensions are 14 inches outer diameter with 0.250 inches wall thickness, with a standard length of 10 feet per piece.
The ordering data indicates that tube marking is required, while quality assurance testing is not required. Hydrostatic testing, ultrasonic inspection, alternate nondestructive test methods, and magnetic permeability testing are all designated as not applicable (N/A) for this procurement. All unit, intermediate, and shipping containers must be marked in accordance with MIL-STD-129, with reference to DLA Procurement Note C20 for further marking instructions. The specification baseline is MIL-T-16420K dated 14 April 1978 including Amendment 1 from 16 September 1988, and any referenced specifications must be at the latest revision at time of award. The material ordering data was prepared by Jonathan Jazo under Code 260.9, with item identification number N4523A 6166-1204.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| 61661203 DATA.pdf | ||
| Solicitation - SPMYM226Q7794.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
MATERIAL ORDERING DATA
MIL-T-16420
Any specification that is referenced in this Material Order Data sheet is required to be to the latest revision at time of award.
IDN: N4523A 6166-1204
ICN: 38WAI25605 KO: S02 KOI: 010
Paragraph 6.1 Ordering Data
A. MIL-T-16420K, TUBE COPPER-NICKEL ALLOY, SEAMLESS AND WELDED
(COPPER ALLOY NUMBERS 715 AND 706), 14 APRIL 1978 INCLUDING AMENDMENT 1, 16
SEPTEMBER 1988.
B. Composition: 70/30 Temper: Annealed Type: II Class: 50 Grade: 2
C. Whether hydrostatic testing is required for tube subject to ultrasonic inspection: N/A
D. Whether an alternate nondestructive test method is proposed: N/A
E. Whether ultrasonic test is required for class 50 and 200 tube: N/A
F. When ultrasonic test of flat product is required: N/A
G. Whether magnetic permeability testing is required for alloy 706 tube: N/A
H. Dimensions of standard tube required: 14" OD x 0.250" WALL
I. Dimensions of nonstandard tube and class required: N/A
J. Length of tube or schedule of lengths required and whether exact or mill lengths: 10 FT LONG
K. Whether tube marking is required: REQUIRED
L. Quality assurance requirements: not required
M. Hydrostatic test pressure required (minimum and maximum) for special class tube: N/A
N. Level of packaging and packing required, if other than specified: N/A
O. Maximum gross weight of container: N/A
Additional Data Requirements:
All unit, intermediate and shipping containers must be marked in accordance with MIL-STD-
129. Refer to DLA Procurement Note C20 for further instructions
Prepared By: Jonathan Jazo
Code: 260.9
File details come from the government source that posted it. Updated .