61661203 DATA.pdf
PDF 100 KB Posted
- Attached to
- METALLIC PIPE
- Solicitation number
- SPMYM226Q7794
About this file
This is a Material Ordering Data sheet for copper-nickel alloy tubing compliant with military specification MIL-T-16420K. The document specifies the procurement requirements for seamless and welded copper-nickel alloy tube (Alloy Numbers 715 and 706) with the following technical parameters: 70/30 composition in annealed temper, Type II classification, Class 50 grade, and Grade 2 rating. The required tube dimensions are 16 inches outer diameter with 0.165 inches wall thickness, supplied in 20-foot lengths at exact or mill lengths as specified.
The ordering data indicates that hydrostatic testing, ultrasonic inspection, alternate nondestructive testing methods, magnetic permeability testing, and quality assurance documentation are not required for this procurement. Tube marking is mandatory. All unit, intermediate, and shipping containers must comply with MIL-STD-129 marking standards, with additional guidance available in DLA Procurement Note C20. The document references IDN N4523A 6166-1203, ICN 38WAI25605, and was prepared by Jonathan Jazo (Code 260.9) for procurement oversight. Any referenced specifications must conform to the latest revision at the time of contract award.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Solicitation - SPMYM226Q7794.pdf | ||
| 61661204 DATA.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
MATERIAL ORDERING DATA
MIL-T-16420
Any specification that is referenced in this Material Order Data sheet is required to be to the latest revision at time of award.
IDN: N4523A 6166-1203
ICN: 38WAI25605 KO: S02 KOI: 011
Paragraph 6.1 Ordering Data
A. MIL-T-16420K, TUBE COPPER-NICKEL ALLOY, SEAMLESS AND WELDED
(COPPER ALLOY NUMBERS 715 AND 706), 14 APRIL 1978 INCLUDING AMENDMENT 1, 16
SEPTEMBER 1988.
B. Composition: 70/30 Temper: Annealed Type: II Class: 50 Grade: 2
C. Whether hydrostatic testing is required for tube subject to ultrasonic inspection: N/A
D. Whether an alternate nondestructive test method is proposed: N/A
E. Whether ultrasonic test is required for class 50 and 200 tube: N/A
F. When ultrasonic test of flat product is required: N/A
G. Whether magnetic permeability testing is required for alloy 706 tube: N/A
H. Dimensions of standard tube required: 16" OD x 0.165" WALL
I. Dimensions of nonstandard tube and class required: N/A
J. Length of tube or schedule of lengths required and whether exact or mill lengths: 20 FT LONG
K. Whether tube marking is required: REQUIRED
L. Quality assurance requirements: not required
M. Hydrostatic test pressure required (minimum and maximum) for special class tube: N/A
N. Level of packaging and packing required, if other than specified: N/A
O. Maximum gross weight of container: N/A
Additional Data Requirements:
All unit, intermediate and shipping containers must be marked in accordance with MIL-STD-
129. Refer to DLA Procurement Note C20 for further instructions
Prepared By: Jonathan Jazo
Code: 260.9
File details come from the government source that posted it. Updated .