6112C152-SPECIFICATION.pdf

This document is a salient characteristics specification for a CFC-200 LPMS-B low pressure fluid filtration unit. The unit is a 200 PSI maximum, skid-mounted filtration system designed to filter oil at flow rates up to 25 GPM and is equipped with a 3 HP, 440V, 3-phase motor. The drip pan and rail assembly measures 48 inches by 48 inches with 4-inch pan height and 24-inch rail height, supported by two braces measuring 5 inches wide, 3 inches high, and 36 inches long. All components are powder coated with ASA 70 Tiger Dryloc 39-70010.

The filtration unit features three Parker Modufow filter housings mounted inline on the support rail, with the first stage utilizing a 10 micron filter element and the remaining two stages using 2 micron elements. Inlet and outlet connections are 1-1/2 inch female Camlock fittings. The system provides three operational routing modes: Complete System Bypass (allowing full bypass of the onboard pump and filter system), Filters Only Bypass (functioning as a filter-only unit when connected to external delivery or pumping systems), and Stand Alone Mode (transferring and filtering oil from a vented supply tank using the onboard pump). The electrical enclosure is NEMA 4 rated and includes a main on/off switch and pressure switch with a 20-foot heavy duty, oil-resistant service cord permanently attached. The system includes two WIKA 233.53 pressure gauges (Part Number 9833565) with glycerine-filled, 2-1/2 inch dials, 0-160 psig range, 316 stainless steel wetted parts, 1/4 inch NPT lower mount, and 304 stainless steel cases. Additional features include visual indicators on filter housings, a check valve on the vertical discharge tube, and a sampling port.