6055VL02 Ordering Data Sheet (ODS).docx

This is an Ordering Data Sheet (ODS) specifying technical requirements for hose assemblies required under a Navy solicitation. The document details specifications for three separate line items, each requiring two hose assemblies (2 Each), for a total of six units across the solicitation N4523A-26-Q-4035 issued by the Department of the Navy Naval Supply Systems Command.

Each hose assembly must be 1/2 inch inner diameter with an overall length of 1500 inches (±2 percent tolerance), rated for 2,000 PSI working pressure and 8,000 PSI burst pressure, with a maximum fluid temperature of 450 degrees Fahrenheit and a minimum bend radius of 3 inches. The hose must be supplied as one continuous length with no splicing allowed and must include a smoothbore PTFE liner covered with white ST-FLEX silicone outer jacket, single 304 stainless steel wire braid, 304 stainless steel crimp collars, and 316 stainless steel 1/2 inch female JIC end fittings. Vacuum service rating is 28 inches of mercury. A Certificate of Compliance is required, and any specification changes require written approval from the Administrative Contracting Officer. This is a Small Business Set-Aside solicitation; interested vendors must submit formal quotes with item specifications to andrew.r.smith6@navy.mil or andrew.r.smith7.civ@us.navy.mil. No changes to technical requirements are permitted without Shipyard approval.