6055VL01 Ordering Data Sheet (ODS).docx

This is an Ordering Data Sheet (ODS) that specifies the technical requirements for hose assemblies required under a Small Business Set-Aside solicitation (N4523A-26-Q-4035) issued by the Department of the Navy Naval Supply Systems Command. The solicitation contains three identical line items, each requiring two hose assemblies, for a total of six units across all line items.

The hose assemblies must meet the following specifications: 1/2 inch inner diameter with an overall length of 780 inches (with a tolerance of +/- 2 percent), designed for 2,000 PSI working pressure and 8,000 PSI burst pressure, capable of handling maximum fluid temperatures of 450 degrees Fahrenheit, with a minimum bend radius of 3 inches and vacuum service rating of 28 inches of mercury. The assemblies must be supplied as one continuous length with no splicing permitted. Material requirements include a smoothbore PTFE (Teflon) liner, white ST-Flex silicone outer jacket, single 304 stainless steel wire braid, 304 stainless steel crimp collars, and 316 stainless steel 1/2 inch female JIC end fittings. A Certificate of Compliance is required for all deliverables. Any changes to specifications or technical requirements require written approval from the Shipyard's Administrative Contracting Officer. Interested contractors should submit formal quotes including item specifications to andrew.r.smith6@navy.mil or andrew.r.smith7.civ@us.navy.mil.