6-Specification 2.pdf
PDF 154 KB Posted
- Attached to
- Four Variations of Pull-behind Mowers
- Solicitation number
- ITB-26-00098
- Issued by
- Hillsborough County, Florida
About this file
This specification document details requirements for a Flail Mower (John Deere/Frontier 1272S, PCN: 172727) as part of a Hillsborough County, Florida Fleet Management Department procurement for four variations of pull-behind mowers with an estimated project budget of $187,500.00. The specification establishes precise technical parameters for the equipment, including cutting capacity of 1.57 inches, adjustable cutting heights of 1.18, 1.96, or 3.14 inches, and an overall width of 72 inches with a cutting width of 94.92 inches. The equipment requires a minimum tractor horsepower of 40 to 105 hp and a minimum tractor weight of 5,300 pounds. The mower features a 3-point hitch with Category 2 classification, offset positioning capabilities ranging from 13.5 inches left of center to 115 inches fully extended, and standard hydraulic offset capability.
The equipment incorporates specific mechanical components including 22 hammer-style blades (with Y-blade options available for service), a 5.5-inch rotor diameter operating at 2,354 rpm with a blade tip speed of 10,039 feet per minute, three SPB drive belts, and spherical roller bearings. Additional specifications include a 1/2-inch hydraulic quick coupler, 4mm frame thickness with 8mm side frame thickness, and a rear wheel weighing 95 pounds when installed. Per Hillsborough County Fleet Management policy, the dealer is responsible for arranging offload capabilities during delivery, must not utilize OEM wiring for equipment add-ons, must comply with general OEM practices, and is required to provide minimum quarterly updates on build and order status to the county.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| 4-ITB-26-00098 Four (4) Variations of Pull-behind Mowers.pdf | ||
| 1-Drug Free Workplace Form.doc | DOC document | |
| 7-Specification 3.pdf | ||
| 2-Substitute W9 Form.pdf.pdf | ||
| 3-Direct Deposit Authorization Form 5.15.2025.pdf.pdf | ||
| 5-Specification 1.pdf | ||
| 8-Specification 4.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Specification 2
Specifications:
DIMENSIONS:
Flail Mower John Deere/Frontier 1272S
PCN: 172727
• Capacity, Cutting (in.): 1.57 in.
• Height, Cutting (in.): 1.18 /1.96 /3.14 in.
• Height, Overall (in.): 45 in.
• Length, Overall (in.): 91.4 in.
• Width, Cutting (in): 72 in.
• Width, Overall (in.): 94.92 in.
• Weight (lbs.): 1484 lb
COMPATIBILITY:
• Tractor HP Required (min. - max.): 40 - 105 hp
• Tractor Weight MINIMUM (lbs.): 5300 lb
• COG (in): 54.7 in.
HITCH:
• Hitch Type: 3-point
• iMatch Compatible: No
• Hitch Category: 2
• Hitch Position: Ofset
• Ofset Range: Left of Center (13.5) in. - Fully Extended (115) in.
• Hydraulic Ofset: Standard
BLADES:
• Blade Type: Hammers (std); Y-Blade (service)
• Number of Hammers: 22
• Type of Blades/ Hammers: 8 / 10
• Blade Tip Speed (ft/min): 10039
ROTOR:
• Rotor Diameter (in.): 5.5 in.
• Rotor Speed (rpm): 2354 rpm
• Rotor Thickness (mm): 10 mm
• Rotor Work Diameter (in.): 16.29 in.
• Rotor Bearing Type: SPHERICAL ROLLER 21309
DRIVES:
• Gear Box Speed (rpm) 540 rpm
• Drive Belts: 3 - SPB Lp=1320
Flail Mower John Deere/Frontier 1272S
PCN: 172727
• Gauge Roller Diameter (in.): 6.62 in.
OTHER:
• Hydraulic Quick Coupler Size (in.): 1/2 in.
• Frame Thickness (mm): 4 mm
• Side Frame Thickness (mm): 8 mm
• Roller Bearing Diameter (in): 3.15 in.
• Rear Roller Bearing Type: D40 D80 B23 62208 2RS2
• Belt adjustment: Screw adjustment
• Primary Pulley Diameter (mm): 225 mm
• Secondary Pulley Diameter (mm): 160 mm
• Hood Height (in.): 19.68 in.
• Side Case Height (in.): 24.4 in.
• Rear wheel: 95 lbs., installed.
IN ACCORDANCE WITH HILLSBOROUGH COUNTY FLEET MANAGEMENT POLICY, DEALER IS
RESPONSIBLE FOR ARRANGING OFFLOAD CAPABILITIES FOR THEIR VEHICLES OR EQUIPMENT BEING
DELIVERED.
DEALER MUST NOT UTILIZE OEM WIRING FOR EQUIPMENT ADD‐ONS DEALER MUST ABIDE BY GENERAL
PRACTICES COVERED UNDER OEM.
THE DEALER WILL PROVIDE HILLSBOROUGH COUNTY FLEET MANAGEMENT WITH MINIMUM QUARTERLY
UPDATES ON THE BUILD/ORDER STATUS OF EQUIPMENT, IF APPLICABLE
| Specification 2 |
| Flail Mower John Deere/Frontier 1272S |
| PCN: 172727 |
| COMPATIBILITY: |
| HITCH: |
| BLADES: |
| ROTOR: |
| DRIVES: |
| Flail Mower John Deere/Frontier 1272S |
| PCN: 172727 |
| OTHER: |
File details come from the government source that posted it. Updated .