6-26-006 Lower Cemetery Irrigation Plans.pdf

PDF 6 MB Posted Mar 3, 2026

Attached to: Lower Cemetary Irrigation Improvements
Solicitation number: 26-006
Issued by: Utah

About this file

Written by GovTribe AI · Mar 3, 2026

Lower Cemetery Irrigation Plans

This document is a comprehensive irrigation design plan for Orem City Cemetery located at 1520 N 800 E in Orem, Utah, prepared by Jacobsen Irrigation Design as of November 2, 2025. The project involves installing approximately 3,205 linear feet of 4-inch irrigation main line, 7,646 linear feet of irrigation lateral line, 139 Rain Bird rotor heads (including 16 Rain Bird 8005 rotor heads sized 4" and 20 sized 20"), and associated irrigation components to irrigate approximately 331,422 square feet of turf sod. The design includes 25 existing remote control valves of unknown condition, 39 Rain Bird PESB remote control valves, 16 Rain Bird 44-LRC quick coupler valves, 5 Leemco LMV ductile iron gate valves, 23 Leemco LV-200 manifold valve assemblies, and 5 Bermad C-30 P air/vacuum relief valves. The system will connect to two existing 4-inch, 200 GPM point-of-connection (POC) locations—the FLAG POC near the cemetery entry and the SHED POC—with wiring routed to two existing WeatherTRAK controllers. The lateral line and main line will include 121.1 linear feet of PVC S/40 pipe sleeves with minimum 2-inch diameter, with separate sleeves required for pipe and electrical conduit.

The irrigation design assumes a peak evapotranspiration rate of 1.75 inches per week, with all irrigated areas to receive water within an 8-hour window at 0.5 inches per application on a 4-day-per-week schedule. All irrigation components shall be located in landscaped areas, with laterals and sprinkler heads placed on the west side of headstones per owner request. The contractor is responsible for field verification of existing main line locations and sizes, with potholing required to confirm current conditions. The design specifies that existing irrigation systems remain abandoned in place, with any pipe or wire interfering with new work to be removed. Contractor responsibilities include maintaining existing landscape plantings in healthy condition during construction, ensuring the existing irrigation system remains operational for no more than 48 hours of downtime, and coordinating all equipment placement and lateral installation with the Owner Approved Representative prior to installation. All work shall comply with detailed specifications for pipe materials, fittings, joint restraints, sleeving installation, and specific manufacturing standards for Leemco, Rain Bird, and other designated components.

View the file

Other files

File	Type	Posted
5-26-006 Contract Docs and Specifications Compiled.pdf	PDF	Mar 3, 2026
1-2017 APWA Manual of Standard Specifications Amendment No. 2-1.pdf	PDF	Mar 3, 2026
4-2017 APWA Orem Supplemental Specifications 2024-1-1.pdf	PDF	Mar 3, 2026
2-2017 APWA Manual of Standard Specifications Amendment No. 1-1.pdf	PDF	Mar 3, 2026
8-2017 APWA Manual of Standard Specifications-1.pdf	PDF	Mar 3, 2026
7-2017 APWA Manual of Standard Plans-1.pdf	PDF	Mar 3, 2026
3-26-006 Lower Cemetery Irrigation Specifications.pdf	PDF	Mar 3, 2026

On GovTribe

Work with this file

Download the original file
Contacts named in this file
Similar government files
Ask GovTribe AI about this file

Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

SEE SHEET LI-101

SEE SHEET LI-102

S E

E S

H E

E T

-1

E E

S H

E E

-1

S E

E S

H E

E T

-1

E E

S H

E E

-1

CONTROLLER IS ACTUALLY 125'

SOUTHWEST OF THIS LOCATION,

NEAR ENTRY TO CEMETERY, NOT

SHOWN ON THIS PLAN. IT HAS

ADEQUATE STATIONS FOR ALL

'F' LABELLED ZONES. RUN NEW

WIRES TO EXISTING CONTROLLER.

EXISTING 'FLAG' POC MAIN LINE

LOCATED APPROXIMATELY HERE.

4" IN SIZE, EITHER S/40 OR CL/200

PVC PIPE. CONTRACTOR TO

POTHOLE AND VERIFY.

EXISTING 'SHED' POC MAIN LINE

LOCATED APPROXIMATELY HERE.

4" IN SIZE, EITHER S/40 OR CL/200

PVC PIPE. CONTRACTOR TO

POTHOLE AND VERIFY.

CONTROLLER 'S' IS ACTUALLY 225'

NORTH & WEST OF THIS LOCATION,

INSIDE OF BRICK BUILDING, NOT

SHOWN ON THIS PLAN. IT HAS

ADEQUATE STATIONS FOR ALL

'S' LABELLED ZONES. RUN NEW

WIRES TO EXISTING CONTROLLER.

SCALE:

feet40 80 120

1" = 40'

NORTH

Jacobsen Irrigation Jacobsen Irrigation Design

AutoCAD SHX Text

AutoCAD SHX Text 1 "14"

AutoCAD SHX Text 2"

AutoCAD SHX Text 1 "14"

AutoCAD SHX Text 2"

AutoCAD SHX Text 2 "12"

AutoCAD SHX Text 1 "14"

AutoCAD SHX Text 2"

AutoCAD SHX Text 2 "12"

AutoCAD SHX Text 1 "14"

AutoCAD SHX Text 2"

AutoCAD SHX Text 2 "12"

AutoCAD SHX Text 1 "14"

AutoCAD SHX Text 2"

AutoCAD SHX Text 2 "12"

AutoCAD SHX Text 1 "14"

AutoCAD SHX Text 2"

AutoCAD SHX Text 2 "12"

AutoCAD SHX Text 2"

AutoCAD SHX Text 2 "12"

AutoCAD SHX Text 1 "14"

AutoCAD SHX Text 2"

AutoCAD SHX Text

AutoCAD SHX Text 3"

AutoCAD SHX Text 1 "14"

AutoCAD SHX Text 3"

AutoCAD SHX Text 2 "12"

AutoCAD SHX Text 3"

AutoCAD SHX Text

AutoCAD SHX Text 3"

AutoCAD SHX Text 1 "14"

AutoCAD SHX Text 2 "12"

AutoCAD SHX Text 1 "14"

AutoCAD SHX Text 2 "12"

AutoCAD SHX Text 1 "14"

AutoCAD SHX Text 2"

AutoCAD SHX Text 1 "14"

AutoCAD SHX Text 2"

AutoCAD SHX Text 2 "12"

AutoCAD SHX Text 3"

AutoCAD SHX Text 1 "14"

AutoCAD SHX Text 2"

AutoCAD SHX Text 2 "12"

AutoCAD SHX Text 3"

AutoCAD SHX Text 1 "14"

AutoCAD SHX Text 2"

AutoCAD SHX Text 2 "12"

AutoCAD SHX Text 1 "14"

AutoCAD SHX Text 2"

AutoCAD SHX Text 2 "12"

AutoCAD SHX Text 1 "14"

AutoCAD SHX Text 2"

AutoCAD SHX Text 2 "12"

AutoCAD SHX Text 1 "14"

AutoCAD SHX Text 2"

AutoCAD SHX Text 1 "14"

AutoCAD SHX Text 2"

AutoCAD SHX Text 1 "14"

AutoCAD SHX Text 2 "12"

AutoCAD SHX Text 1 "14"

AutoCAD SHX Text 3"

AutoCAD SHX Text 2"

AutoCAD SHX Text 1 "14"

AutoCAD SHX Text 2 "12"

AutoCAD SHX Text 2"

AutoCAD SHX Text 1 "14"

AutoCAD SHX Text 2"

AutoCAD SHX Text 1 "14"

AutoCAD SHX Text 2"

AutoCAD SHX Text 2 "12"

AutoCAD SHX Text 1 "14"

AutoCAD SHX Text 2"

AutoCAD SHX Text 2 "12"

AutoCAD SHX Text 1 "14"

AutoCAD SHX Text 3"

AutoCAD SHX Text 2 "12"

AutoCAD SHX Text 2"

AutoCAD SHX Text 1 "14"

AutoCAD SHX Text 3"

AutoCAD SHX Text 2"

AutoCAD SHX Text 1 "14"

AutoCAD SHX Text 3"

AutoCAD SHX Text 2 "12"

AutoCAD SHX Text 1 "14"

AutoCAD SHX Text 2"

AutoCAD SHX Text 1 "14"

AutoCAD SHX Text 3"

AutoCAD SHX Text 2"

AutoCAD SHX Text 1 "14"

AutoCAD SHX Text 2"

AutoCAD SHX Text 3"

AutoCAD SHX Text 1 "14"

AutoCAD SHX Text 2"

AutoCAD SHX Text 1 "14"

AutoCAD SHX Text 3"

AutoCAD SHX Text 2"

AutoCAD SHX Text 1 "14"

AutoCAD SHX Text 2"

AutoCAD SHX Text 3"

AutoCAD SHX Text 2"

AutoCAD SHX Text 1 "14"

AutoCAD SHX Text F

AutoCAD SHX Text S

AutoCAD SHX Text 2"

AutoCAD SHX Text 1 "14"

AutoCAD SHX Text 3"

AutoCAD SHX Text 2"

AutoCAD SHX Text 1 "14"

AutoCAD SHX Text 2"

AutoCAD SHX Text 1 "14"

AutoCAD SHX Text 3"

AutoCAD SHX Text 2 "12"

AutoCAD SHX Text 3"

AutoCAD SHX Text 1 "14"

AutoCAD SHX Text 3"

AutoCAD SHX Text 2 "12"

AutoCAD SHX Text 3"

AutoCAD SHX Text 2"

AutoCAD SHX Text 1 "14"

AutoCAD SHX Text 2 "12"

AutoCAD SHX Text 2"

AutoCAD SHX Text 3"

AutoCAD SHX Text 2 "12"

AutoCAD SHX Text 1 "14"

AutoCAD SHX Text 2 "12"

AutoCAD SHX Text 3"

AutoCAD SHX Text 1 "14"

AutoCAD SHX Text 3"

AutoCAD SHX Text

AutoCAD SHX Text 2"

AutoCAD SHX Text 1 "14"

AutoCAD SHX Text A

AutoCAD SHX Text

FLAG

AutoCAD SHX Text

SHED

AutoCAD SHX Text A

AutoCAD SHX Text 4"

AutoCAD SHX Text

SYMBOL

AutoCAD SHX Text

DESCRIPTION

AutoCAD SHX Text

QTY

AutoCAD SHX Text *TURF IRRIGATED AREAS Turf irrigated areas. Fixed spray nozzles, Rotary stream nozzles, Medium rotors, Large rotors. Precipitation rates from 0.4` to 1.75" per hour.

AutoCAD SHX Text 331,422 sf

AutoCAD SHX Text

SYMBOL

AutoCAD SHX Text

MANUFACTURER/MODEL

AutoCAD SHX Text

QTY

AutoCAD SHX Text Rain Bird 8005 *ROTOR HEAD* 16

AutoCAD SHX Text

AutoCAD SHX Text Rain Bird 8005 *ROTOR HEAD* 20

AutoCAD SHX Text

SYMBOL

AutoCAD SHX Text

MANUFACTURER/MODEL/DESCRIPTION

AutoCAD SHX Text

QTY

AutoCAD SHX Text

EXISTING REMOTE CONTROL VALVE SIZE / CONDITION UNKNOWN. LOCATION PER OWNER.

AutoCAD SHX Text

AutoCAD SHX Text Rain Bird PESB *REMOTE CONTROL VALVE*

AutoCAD SHX Text

AutoCAD SHX Text Rain Bird 44-LRC *QUICK COUPLER VALVE*

AutoCAD SHX Text

AutoCAD SHX Text LEEMCO LMV-XX-SB or BB *DUCTILE IRON GATE VALVE*

AutoCAD SHX Text

LEEMCO LV-200 W/LT-XXX TEE *MANIFOLD VALVE ASSY*

AutoCAD SHX Text

AutoCAD SHX Text Bermad C-30 P Air/Vacuum Relief Valve

AutoCAD SHX Text

AutoCAD SHX Text Existing WeatherTRAK WTOXR-C-48-SWM *CONTROLLER* Model, station count, features unknown

AutoCAD SHX Text

AutoCAD SHX Text Existing WeatherTRAK WTOXR-C-48-SWM *CONTROLLER* Model, station count, features unknown

AutoCAD SHX Text

AutoCAD SHX Text EXISTING FLAG POC Minimums Required: 4", 200 GPM`s @ 100 PSI. Contractor must field verify! Less than minimums may require re-design!

AutoCAD SHX Text

AutoCAD SHX Text EXISTING SHED POC Minimums Required: 4", 200 GPM`s @ 100 PSI. Contractor must field verify! Less than minimums may require re-design!

AutoCAD SHX Text

AutoCAD SHX Text Irrigation Lateral Line: PVC S/40 1" thru 3" bell & spigot end solvent weld pipe. Use P-70 primer and 711 glue from IPS Weld-On for solvent weld pipe and fitting joints. All lateral fittings shall be PVC S/40. NO 3/4" PIPE or FITTINGS

AutoCAD SHX Text 7,646 lf

AutoCAD SHX Text Irrigation Mainline: PVC CL/200 SDR 21 Gasketed bell & spigot end, sized 4" and larger. Use Leemco ductile iron fittings with joint restraints.

AutoCAD SHX Text 3,205 lf

AutoCAD SHX Text Pipe Sleeve: PVC S/40 Minimum sleeve size 2". Install separate sleeves for pipe and wiring, Wiring shall be in gray electrical conduit.

AutoCAD SHX Text

121.1 lf

AutoCAD SHX Text

AutoCAD SHX Text A

AutoCAD SHX Text F

AutoCAD SHX Text S

AutoCAD SHX Text

FLAG

AutoCAD SHX Text

SHED

AutoCAD SHX Text Valve Number

AutoCAD SHX Text Valve Flow

AutoCAD SHX Text Valve Size

AutoCAD SHX Text Valve Callout

AutoCAD SHX Text

IRRIGATION SCHEDULE

AutoCAD SHX Text

LI100

AutoCAD SHX Text

OVERALL SHEET

AutoCAD SHX Text

REVIEW

AutoCAD SHX Text

REVISIONS

AutoCAD SHX Text

NO.

AutoCAD SHX Text

DATE

AutoCAD SHX Text

DESCRIPTION

AutoCAD SHX Text

REV. BY

AutoCAD SHX Text 25-000

AutoCAD SHX Text

CHECKED

AutoCAD SHX Text

APPROVED

AutoCAD SHX Text

DESIGN

AutoCAD SHX Text

DESIGN

AutoCAD SHX Text

DRAWN

AutoCAD SHX Text

BAR BELOW IS ONE INCH

AutoCAD SHX Text

ON ORIGINAL DRAWING

AutoCAD SHX Text

PROJECT

AutoCAD SHX Text

NUMBER

AutoCAD SHX Text

DATE:

AutoCAD SHX Text 11/02/2025

AutoCAD SHX Text

OREM, UT 84097

AutoCAD SHX Text

OREM CITY CEMETERY

AutoCAD SHX Text 1520 N 800 E

AutoCAD SHX Text

SHEET

AutoCAD SHX Text

DRAWING NO.

AutoCAD SHX Text

YYY

AutoCAD SHX Text

R. JACOBSEN

AutoCAD SHX Text

R. JACOBSEN

AutoCAD SHX Text

IRRIGATION DESIGN

AutoCAD SHX Text

ORIGINAL SHEET SIZE

AutoCAD SHX Text

IS 22" X 34"

S E

E S

H E

E T

-1

E E

S H

E E

-1

EXISTING 'SHED' POC MAIN LINE

LOCATED APPROXIMATELY HERE.

4" IN SIZE, EITHER S/40 OR CL/200

PVC PIPE. CONTRACTOR TO

POTHOLE AND VERIFY.

CONTROLLER 'S' IS ACTUALLY 225'

NORTH & WEST OF THIS LOCATION,

INSIDE OF BRICK BUILDING, NOT

SHOWN ON THIS PLAN. IT HAS

ADEQUATE STATIONS FOR ALL

'S' LABELLED ZONES. RUN NEW

WIRES TO EXISTING CONTROLLER. NORTH Jacobsen

Irrigation Jacobsen Irrigation Design

SCALE:

feet20 40 60

1" = 20'

SEE SHEET LI100 OR LI103 FOR LEGEND

AutoCAD SHX Text

AutoCAD SHX Text 1 "14"

AutoCAD SHX Text 2"

AutoCAD SHX Text 1 "14"

AutoCAD SHX Text 2"

AutoCAD SHX Text 2 "12"

AutoCAD SHX Text 1 "14"

AutoCAD SHX Text 2"

AutoCAD SHX Text 2 "12"

AutoCAD SHX Text 3"

AutoCAD SHX Text 1 "14"

AutoCAD SHX Text 2 "12"

AutoCAD SHX Text 1 "14"

AutoCAD SHX Text 2 "12"

AutoCAD SHX Text 2"

AutoCAD SHX Text 1 "14"

AutoCAD SHX Text 2"

AutoCAD SHX Text 2 "12"

AutoCAD SHX Text 1 "14"

AutoCAD SHX Text 3"

AutoCAD SHX Text 2"

AutoCAD SHX Text 1 "14"

AutoCAD SHX Text 2 "12"

AutoCAD SHX Text 2"

AutoCAD SHX Text 1 "14"

AutoCAD SHX Text 2"

AutoCAD SHX Text 1 "14"

AutoCAD SHX Text 2"

AutoCAD SHX Text 2 "12"

AutoCAD SHX Text 1 "14"

AutoCAD SHX Text 2"

AutoCAD SHX Text 2 "12"

AutoCAD SHX Text 3"

AutoCAD SHX Text 2 "12"

AutoCAD SHX Text 1 "14"

AutoCAD SHX Text 3"

AutoCAD SHX Text 2"

AutoCAD SHX Text 1 "14"

AutoCAD SHX Text 2"

AutoCAD SHX Text 3"

AutoCAD SHX Text 2"

AutoCAD SHX Text 1 "14"

AutoCAD SHX Text S

AutoCAD SHX Text 2 "12"

AutoCAD SHX Text 3"

AutoCAD SHX Text 1 "14"

AutoCAD SHX Text 2 "12"

AutoCAD SHX Text 2"

AutoCAD SHX Text 2 "12"

AutoCAD SHX Text 1 "14"

AutoCAD SHX Text 2 "12"

AutoCAD SHX Text 3"

AutoCAD SHX Text

AutoCAD SHX Text 2"

AutoCAD SHX Text 1 "14"

AutoCAD SHX Text

SHED

AutoCAD SHX Text A

AutoCAD SHX Text 4"

AutoCAD SHX Text

LI101

AutoCAD SHX Text

NORTH WEST

AutoCAD SHX Text

REVIEW

AutoCAD SHX Text

REVISIONS

AutoCAD SHX Text

NO.

AutoCAD SHX Text

DATE

AutoCAD SHX Text

DESCRIPTION

AutoCAD SHX Text

REV. BY

AutoCAD SHX Text 25-000

AutoCAD SHX Text

CHECKED

AutoCAD SHX Text

APPROVED

AutoCAD SHX Text

DESIGN

AutoCAD SHX Text

DESIGN

AutoCAD SHX Text

DRAWN

AutoCAD SHX Text

BAR BELOW IS ONE INCH

AutoCAD SHX Text

ON ORIGINAL DRAWING

AutoCAD SHX Text

PROJECT

AutoCAD SHX Text

NUMBER

AutoCAD SHX Text

DATE:

AutoCAD SHX Text 11/02/2025

AutoCAD SHX Text

OREM, UT 84097

AutoCAD SHX Text

OREM CITY CEMETERY

AutoCAD SHX Text 1520 N 800 E

AutoCAD SHX Text

SHEET

AutoCAD SHX Text

DRAWING NO.

AutoCAD SHX Text

YYY

AutoCAD SHX Text

R. JACOBSEN

AutoCAD SHX Text

R. JACOBSEN

AutoCAD SHX Text

IRRIGATION DESIGN

AutoCAD SHX Text

ORIGINAL SHEET SIZE

S E

E S

H E

E T

-1

E E

S H

E E

-1

S E

E S

H E

E T

S E

E S

H E

E T

CONTROLLER IS ACTUALLY 125'

SOUTHWEST OF THIS LOCATION,

NEAR ENTRY TO CEMETERY, NOT

SHOWN ON THIS PLAN. IT HAS

ADEQUATE STATIONS FOR ALL

'F' LABELLED ZONES. RUN NEW

WIRES TO EXISTING CONTROLLER.

EXISTING 'FLAG' POC MAIN LINE

LOCATED APPROXIMATELY HERE.

4" IN SIZE, EITHER S/40 OR CL/200

PVC PIPE. CONTRACTOR TO

POTHOLE AND VERIFY.

NORTH

Jacobsen Irrigation Jacobsen Irrigation Design

SCALE:

feet20 40 60

1" = 20'

SEE SHEET LI100 OR LI103 FOR LEGEND

AutoCAD SHX Text

AutoCAD SHX Text 1 "14"

AutoCAD SHX Text 2"

AutoCAD SHX Text 2 "12"

AutoCAD SHX Text 1 "14"

AutoCAD SHX Text 2"

AutoCAD SHX Text 2 "12"

AutoCAD SHX Text 1 "14"

AutoCAD SHX Text 2"

AutoCAD SHX Text 2 "12"

AutoCAD SHX Text 1 "14"

AutoCAD SHX Text 2"

AutoCAD SHX Text 2 "12"

AutoCAD SHX Text 2"

AutoCAD SHX Text 2 "12"

AutoCAD SHX Text

AutoCAD SHX Text 3"

AutoCAD SHX Text 1 "14"

AutoCAD SHX Text 3"

AutoCAD SHX Text

AutoCAD SHX Text 3"

AutoCAD SHX Text 1 "14"

AutoCAD SHX Text 2"

AutoCAD SHX Text 1 "14"

AutoCAD SHX Text 2"

AutoCAD SHX Text 2 "12"

AutoCAD SHX Text 3"

AutoCAD SHX Text 1 "14"

AutoCAD SHX Text 2"

AutoCAD SHX Text 2 "12"

AutoCAD SHX Text 3"

AutoCAD SHX Text 1 "14"

AutoCAD SHX Text 2"

AutoCAD SHX Text 2 "12"

AutoCAD SHX Text 1 "14"

AutoCAD SHX Text 2"

AutoCAD SHX Text 2 "12"

AutoCAD SHX Text 1 "14"

AutoCAD SHX Text 2"

AutoCAD SHX Text 1 "14"

AutoCAD SHX Text 2 "12"

AutoCAD SHX Text 1 "14"

AutoCAD SHX Text 3"

AutoCAD SHX Text 2 "12"

AutoCAD SHX Text 2"

AutoCAD SHX Text 1 "14"

AutoCAD SHX Text 3"

AutoCAD SHX Text 2"

AutoCAD SHX Text 1 "14"

AutoCAD SHX Text 2"

AutoCAD SHX Text 1 "14"

AutoCAD SHX Text 3"

AutoCAD SHX Text 2"

AutoCAD SHX Text 1 "14"

AutoCAD SHX Text 2"

AutoCAD SHX Text 1 "14"

AutoCAD SHX Text F

AutoCAD SHX Text 3"

AutoCAD SHX Text 2"

AutoCAD SHX Text 1 "14"

AutoCAD SHX Text 2"

AutoCAD SHX Text 1 "14"

AutoCAD SHX Text 3"

AutoCAD SHX Text 2"

AutoCAD SHX Text 3"

AutoCAD SHX Text 1 "14"

AutoCAD SHX Text 3"

AutoCAD SHX Text A

AutoCAD SHX Text

FLAG

AutoCAD SHX Text A

AutoCAD SHX Text 4"

AutoCAD SHX Text

LI102

AutoCAD SHX Text

SOUTH WEST

AutoCAD SHX Text

REVIEW

AutoCAD SHX Text

REVISIONS

AutoCAD SHX Text

NO.

AutoCAD SHX Text

DATE

AutoCAD SHX Text

DESCRIPTION

AutoCAD SHX Text

REV. BY

AutoCAD SHX Text 25-000

AutoCAD SHX Text

CHECKED

AutoCAD SHX Text

APPROVED

AutoCAD SHX Text

DESIGN

AutoCAD SHX Text

DESIGN

AutoCAD SHX Text

DRAWN

AutoCAD SHX Text

BAR BELOW IS ONE INCH

AutoCAD SHX Text

ON ORIGINAL DRAWING

AutoCAD SHX Text

PROJECT

AutoCAD SHX Text

NUMBER

AutoCAD SHX Text

DATE:

AutoCAD SHX Text 11/02/2025

AutoCAD SHX Text

OREM, UT 84097

AutoCAD SHX Text

OREM CITY CEMETERY

AutoCAD SHX Text 1520 N 800 E

AutoCAD SHX Text

SHEET

AutoCAD SHX Text

DRAWING NO.

AutoCAD SHX Text

YYY

AutoCAD SHX Text

R. JACOBSEN

AutoCAD SHX Text

R. JACOBSEN

AutoCAD SHX Text

IRRIGATION DESIGN

AutoCAD SHX Text

ORIGINAL SHEET SIZE

S E

E S

H E

E T

-1

E E

S H

E E

-1

S E

E S

H E

E T

-1

E E

S H

E E

-1

IRRIGATION NOTES

NORTH

Jacobsen Irrigation Jacobsen Irrigation Design

SCALE:

feet20 40 60

1" = 20'

AutoCAD SHX Text

AutoCAD SHX Text 1 "14"

AutoCAD SHX Text 2"

AutoCAD SHX Text 2 "12"

AutoCAD SHX Text 1 "14"

AutoCAD SHX Text 3"

AutoCAD SHX Text 1 "14"

AutoCAD SHX Text 2"

AutoCAD SHX Text 3"

AutoCAD SHX Text 1 "14"

AutoCAD SHX Text 2"

AutoCAD SHX Text 1 "14"

AutoCAD SHX Text 3"

AutoCAD SHX Text 2"

AutoCAD SHX Text 1 "14"

AutoCAD SHX Text 2 "12"

AutoCAD SHX Text 2"

AutoCAD SHX Text A

AutoCAD SHX Text 4"

AutoCAD SHX Text

1. These Irrigation Notes are part of the irrigation Construction Documents package (hereafter referred to as CD's). Complete CD's shall include all of the following: Plan Drawings, Legend, Notes, Details and Specification Section. Contractor shall be responsible to obtain and be familiar with all components in all components in components in the CD's package, all of which are necessary to correctly bid and build the irrigation system for this project. 2. Irrigation base drawing (the aerial background) was provided by Orem City. 3. The irrigation design is based on a minimum POC size, a minimum dynamic pressure at the POC, and a minimum water volume at the POC. This design assumes a minimum of (2) 6" POC's, @ 110 PSI, and 110 GPM. PSI was provided by Cemetery staff. Actual site conditions may vary from these parameters. Site conditions which vary from the POC size, pressure or volume may render the installation non-operable and or may require re-design. 4. Irrigation design intent assumes a peak ET of 1.75" per week, that all of the irrigated area shall be watered in an 8 hour watering window, placing 1/2" of water per application, with a 4 day per week watering schedule. 5. Utility locations & depths, final grades, hardscape features and or plantings may not be indicated within the irrigation CD's. Irrigation Contractor shall be responsible for review of other plans, and/or site verification of these items. Irrigation Contractor shall verify location of existing features or other site improvements that will affect or be affected by irrigation system installation. If any part of the CD's cannot be followed due to existing or proposed conditions contact the Owner Approved Representative (OAR) for instructions prior to commencing or proceeding with that work. 6. Contractor shall self-verify material counts and square footages. Any quantities shown in Irrigation Legend are provided as courtesy Owner information only. Shown plan quantities shall take precedence over any listed legend quantities. Contractor shall be responsible to provide the larger quantity indicated. 7. Contractor shall contact the local underground utility provider or locator services for utility location and identification 48 hours prior to any excavation on project site. 8. Perform excavation in the vicinity of underground utilities and existing buildings, features, hardscapes, and existing trees with care; and if necessary, by hand. Contractor bears full responsibility for this work and disruption or damage shall be repaired immediately at no expense to the Owner. 9. Exact locations of major irrigation components and routing of main line and wiring to be approved by the OAR in the field prior to installation. Irrigation Irrigation main line and/or other components are shown schematically on plan for graphic clarity only. All Irrigation components shall be located in landscaped areas. 10. Irrigation plans may show Isolation Valves and or Remote Control Valves (RCV's) in groups and locations. Contractor shall place RCV's in logical groupings and locations as field conditions permit. All remote control valves and quick coupler valves shall be isolated from the main line via a manifold isolation valve as shown in details. 11. Quick coupler valves in landscaped areas shall be installed as close as possible to plan locations. 12. Contractor shall be responsible to ensure all sleeves necessary for main line, wire and lateral line are installed as needed, prior to hardscape features. Not Not all sleeving necessary to complete this project may be shown on plan. Portions of irrigation sleeves may have or may not have been previously installed by others. Coordinate location, installation and usage with General Contractor and or OAR. 13. Contractor shall be responsible to maintain existing landscape plant material serviced by existing irrigation system in a healthy manner. Contractor shall not have existing irrigation system disabled for more than 48 hours at any time. Upon disabling or demolishing existing irrigation, Contractor shall install new main and wires to restore operation in no more than 48 hours. Contractor shall be responsible to prevent debris from entering existing piping. 14. Contractor shall ensure that there is proper coverage and overlap from new irrigation system to any existing irrigation system. Any discrepancies or difficulties shall be brought to the attention of the OAR. 15. Contractor shall restore existing asphalt roadways to current conditions. Provide compacted road base and fill below, saw cut paving for trench. 16. Contractor shall replace all trenched and excavated areas with new, fresh sod, to match existing. 17. Contractor shall coordinate Lateral and head placement with OAR prior to installation. Generally: avoid and clear above ground headstones with rotor streams. Run laterals and place sprinklers on west side of head stones per Owner's request. 18. Existing irrigation system to be abandoned in place. Any pipe, wire, equipment interfering with new work; or brought above grade shall be removed by Contractor. Coordinate disposal with Owner.

AutoCAD SHX Text

SYMBOL

AutoCAD SHX Text

DESCRIPTION

AutoCAD SHX Text

QTY

AutoCAD SHX Text *TURF IRRIGATED AREAS Turf irrigated areas. Fixed spray nozzles, Rotary stream nozzles, Medium rotors, Large rotors. Precipitation rates from 0.4` to 1.75" per hour.

AutoCAD SHX Text 331,422 sf

AutoCAD SHX Text

SYMBOL

AutoCAD SHX Text

MANUFACTURER/MODEL

AutoCAD SHX Text

QTY

AutoCAD SHX Text Rain Bird 8005 *ROTOR HEAD* 16

AutoCAD SHX Text

AutoCAD SHX Text Rain Bird 8005 *ROTOR HEAD* 20

AutoCAD SHX Text

SYMBOL

AutoCAD SHX Text

MANUFACTURER/MODEL/DESCRIPTION

AutoCAD SHX Text

QTY

AutoCAD SHX Text

EXISTING REMOTE CONTROL VALVE SIZE / CONDITION UNKNOWN. LOCATION PER OWNER.

AutoCAD SHX Text

AutoCAD SHX Text Rain Bird PESB *REMOTE CONTROL VALVE*

AutoCAD SHX Text

AutoCAD SHX Text Rain Bird 44-LRC *QUICK COUPLER VALVE*

AutoCAD SHX Text

AutoCAD SHX Text LEEMCO LMV-XX-SB or BB *DUCTILE IRON GATE VALVE*

AutoCAD SHX Text

LEEMCO LV-200 W/LT-XXX TEE *MANIFOLD VALVE ASSY*

AutoCAD SHX Text

AutoCAD SHX Text Bermad C-30 P Air/Vacuum Relief Valve

AutoCAD SHX Text

AutoCAD SHX Text Existing WeatherTRAK WTOXR-C-48-SWM *CONTROLLER* Model, station count, features unknown

AutoCAD SHX Text

AutoCAD SHX Text Existing WeatherTRAK WTOXR-C-48-SWM *CONTROLLER* Model, station count, features unknown

AutoCAD SHX Text

AutoCAD SHX Text EXISTING FLAG POC Minimums Required: 4", 200 GPM`s @ 100 PSI. Contractor must field verify! Less than minimums may require re-design!

AutoCAD SHX Text

AutoCAD SHX Text EXISTING SHED POC Minimums Required: 4", 200 GPM`s @ 100 PSI. Contractor must field verify! Less than minimums may require re-design!

AutoCAD SHX Text

AutoCAD SHX Text 7,646 lf

AutoCAD SHX Text Irrigation Mainline: PVC CL/200 SDR 21 Gasketed bell & spigot end, sized 4" and larger. Use Leemco ductile iron fittings with joint restraints.

AutoCAD SHX Text 3,205 lf

AutoCAD SHX Text Pipe Sleeve: PVC S/40 Minimum sleeve size 2". Install separate sleeves for pipe and wiring, Wiring shall be in gray electrical conduit.

AutoCAD SHX Text

121.1 lf

AutoCAD SHX Text

AutoCAD SHX Text A

AutoCAD SHX Text F

AutoCAD SHX Text S

AutoCAD SHX Text

FLAG

AutoCAD SHX Text

SHED

AutoCAD SHX Text Valve Number

AutoCAD SHX Text Valve Flow

AutoCAD SHX Text Valve Size

AutoCAD SHX Text Valve Callout

AutoCAD SHX Text

IRRIGATION SCHEDULE

AutoCAD SHX Text

LI103

AutoCAD SHX Text

EAST

AutoCAD SHX Text

REVIEW

AutoCAD SHX Text

REVISIONS

AutoCAD SHX Text

NO.

AutoCAD SHX Text

DATE

AutoCAD SHX Text

DESCRIPTION

AutoCAD SHX Text

REV. BY

AutoCAD SHX Text 25-000

AutoCAD SHX Text

CHECKED

AutoCAD SHX Text

APPROVED

AutoCAD SHX Text

DESIGN

AutoCAD SHX Text

DESIGN

AutoCAD SHX Text

DRAWN

AutoCAD SHX Text

BAR BELOW IS ONE INCH

AutoCAD SHX Text

ON ORIGINAL DRAWING

AutoCAD SHX Text

PROJECT

AutoCAD SHX Text

NUMBER

AutoCAD SHX Text

DATE:

AutoCAD SHX Text 11/02/2025

AutoCAD SHX Text

OREM, UT 84097

AutoCAD SHX Text

OREM CITY CEMETERY

AutoCAD SHX Text 1520 N 800 E

AutoCAD SHX Text

SHEET

AutoCAD SHX Text

DRAWING NO.

AutoCAD SHX Text

YYY

AutoCAD SHX Text

R. JACOBSEN

AutoCAD SHX Text

R. JACOBSEN

AutoCAD SHX Text

IRRIGATION DESIGN

AutoCAD SHX Text

ORIGINAL SHEET SIZE

TORQUE

FT-LBS.

BOLT

SIZE

NO.

BOLTS

2" 2.5" 3" 4" 6" 8"

10" 12"

PIPE

SIZE

3/8" x 2.5" 3/8" x 2.5" 3/8" x 2.5" 1/2" x 3"

1/2" x 3.5" 1/2" x 4"

5/8" x 5.5" 5/8" x 5.5"

6' 10' 15' 25' 40' 70' 90'

110'

19' 23' 30' 45' 63' 75' 96'

112'

31' 53' 63' 75' 83'

10' 20' 40' 55' 56' 60'

4' 8'

14' 30' 33' 36' 38'

6' 9'

11' 20' 29' 38' 45' 53'

2' 4' 6' 9'

13' 19' 21'

1' 2' 3' 4' 6' 8' 9'

10'

BLIND SERV. B.1 STEP 2 STEP 3 STEP11° 22° 45° 90°

BENDS

PIPE

SIZE

DEAD END

2" 2.5" 3" 4" 6" 8"

10" 12"

1' 1' 2' 2' 3' 4' 5' 5'

REDUCERS

INSTALLATION CHARTDISTANCE CHART

THESE CHARTS ARE BASED ON USE OF LEEMCO PRODUCTS, AND PROVIDED AS REFERENCE ONLY.

CONTRACTOR SHALL CONTACT CORRESPONDING MANUFACTURER REPRESENTATIVE FOR PROPER

CHARTS, TRAINING AND CERTIFICATION IF OTHER PRODUCTS ARE SUBMITTED AND APPROVED. FOR

USE OF LEEMCO PRODUCTS, CONTACT TONY GARNER @ (208) 631-7787, THE LEEMCO

REPRESENTATIVE, FOR ALL QUESTIONS CONCERNING LEEMCO PRODUCTS.

REFER TO THE FOLLOWING TABLE WHICH LISTS THE NUMBER OF

BOLTS, SIZE, AND TORQUE FOR EACH BOLT IN REFERENCE TO THE

SIZE OF PIPE WHICH IS BEING RESTRAINED.

AS AN EXAMPLE, IF YOU HAVE A 3" PIPE, YOU WILL NEED 2 BOLTS

THAT ARE 3/8 X 2.5" AND TIGHTEN THEM WITH A TORQUE WRENCH

TO 20 FT-LBS.

REFER TO THE FOLLOWING TABLE THAT LISTS THE LENGTH (IN FEET) FOR EACH SIZE/TYPE FITTING WITHIN WHICH ALL JOINTS JUST BE RESTRAINED. ALL FITTINGS AND JOINT RESTRAINTS SHALL BE

INSTALLED PER MANUFACTURERS RECOMMENDATIONS & SPECIFICATIONS.

AS AN EXAMPLE, IF YOU ARE INSTALLING A 3" MAINLINE WITH A DIRECTIONAL CHANGE OF 90°, REFER TO CHART UNDER PIPE SIZE TO 3" AND UNDER BENDS 90 YOU WILL SEE THE DISTANCE OF 11'. IF THERE IS ANY JOINT (VALVE, BELL, ETC.) YOU MUST INSTALL A JOINT RESTRAINT WITHIN 11' OF THE 90°

MAINLINE DIRECTIONAL CHANGE.

Jacobsen Irrigation Jacobsen Irrigation Design

AutoCAD SHX Text

AutoCAD SHX Text FINISH GRADE STANDARD VALVE BOX COMBINATION AIR/VACUUM VALVE. SEE LEGEND PVC S/80 TH X TH ELBOW PVC S/80 MACHINED TOE NIPPLE LEEMCO LV-200 DUCTILE IRON VALVE CONCRETE PAVER BRICKS (MINIMUM 4) 3/4" MINUS GRAVEL MAIN LINE PIPE LEEMCO LV-XX-TEE, WITH JOINT RESTRAINT MARLEX STREET ELBOW FOR REDIRECTING OVERFLOW

AutoCAD SHX Text

AutoCAD SHX Text SLEEVES TO BE 2X PIPE SIZE WITHIN. JOINTS TO BE WATERTIGHT. MECHANICALLY TAMP TO 95% PROCTOR. ALL WIRE SLEEVING SHALL BE GRAY S/40 ELECTRICAL CONDUIT. NO EXCEPTIONS.

AutoCAD SHX Text

4" MINIMUM CLEARANCE

AutoCAD SHX Text

FINISH GRADE

AutoCAD SHX Text

6" MINIMUM, 18" MAXIMUM

AutoCAD SHX Text

18" MINIMUM, 24" MAXIMUM PIPE COVER

AutoCAD SHX Text

END SECTION

AutoCAD SHX Text

SIDE SECTION

AutoCAD SHX Text

SCALE: NTS

AutoCAD SHX Text B2

AutoCAD SHX Text

SLEEVING

AutoCAD SHX Text

LANDSCAPE & IRRIGATION DETAIL

AutoCAD SHX Text

3. MAIN LINE SHALL HAVE 18" COVER, LATERAL LINE SHALL HAVE 8-12" MIN. COVER.

AutoCAD SHX Text

LATERAL ONLY

AutoCAD SHX Text

MAIN ONLY

AutoCAD SHX Text

WIRING ONLY

AutoCAD SHX Text

IN CONDUIT

AutoCAD SHX Text

%%USECTION VIEW

AutoCAD SHX Text

%%UPLAN VIEW

AutoCAD SHX Text

2. PIPE AND WIRE SHALL BE PLACED IN SEPARATE SLEEVES.

AutoCAD SHX Text

1. SLEEVES SHALL BE TWICE THE DIAMETER OF THE PIPE WITHIN.

AutoCAD SHX Text

NOTES:

AutoCAD SHX Text

TRENCH AS SHOWN.

AutoCAD SHX Text

BE SNAKED IN

AutoCAD SHX Text

PLASTIC PIPING TO

AutoCAD SHX Text

ALL SOLVENT WELD

AutoCAD SHX Text

AND BESIDE MAINLINE.

AutoCAD SHX Text

RUN WIRING BENEATH

AutoCAD SHX Text

SAME TRENCH

AutoCAD SHX Text

AND WIRING

AutoCAD SHX Text

MAIN, LATERAL,

AutoCAD SHX Text

SCALE: NTS

AutoCAD SHX Text B1

AutoCAD SHX Text

PIPE/WIRE IN TRENCH

AutoCAD SHX Text

LANDSCAPE & IRRIGATION DETAIL

AutoCAD SHX Text

4. ALL WIRING SHALL BE ENCLOSED IN CONDUIT: CONTROL WIRE, 2-WIRE, POWER WIRE.

AutoCAD SHX Text B3

AutoCAD SHX Text

JOINT RESTRAINT TABLES

AutoCAD SHX Text

REDUCER BUSHING WITH RESTRAINT

AutoCAD SHX Text

AutoCAD SHX Text REPRESENTATIVE SAMPLING OF FITTINGS WITH JOINT RESTRAINTS INSTALLED. PIPE TO PIPE RESTRAINTS SHOWN, NOT NECESSARILY ALWAYS REQUIRED. REFER TO TABLES IN OTHER DETAILS.

AutoCAD SHX Text

TEE WITH 3 RESTRAINTS

AutoCAD SHX Text

PIPE TO PIPE RESTRAINT

AutoCAD SHX Text

VALVE WITH RESTRAINT

AutoCAD SHX Text

ELBOW WITH RESTRAINT

AutoCAD SHX Text

CAP WITH RESTRAINT

AutoCAD SHX Text

SCALE: NTS

AutoCAD SHX Text B4

AutoCAD SHX Text

TYPICAL JOINT RESTRAINT LAYOUT (2-1/2" & LARGER)

AutoCAD SHX Text

PLAN VIEW DETAIL

AutoCAD SHX Text

SCALE: NTS

AutoCAD SHX Text B5

AutoCAD SHX Text

COMBINATION AIR/VAC VALVE

AutoCAD SHX Text

LANDSCAPE & IRRIGATION DETAIL

AutoCAD SHX Text

LI200

AutoCAD SHX Text

DETAILS

AutoCAD SHX Text

REVIEW

AutoCAD SHX Text

REVISIONS

AutoCAD SHX Text

NO.

AutoCAD SHX Text

DATE

AutoCAD SHX Text

DESCRIPTION

AutoCAD SHX Text

REV. BY

AutoCAD SHX Text 25-000

AutoCAD SHX Text

CHECKED

AutoCAD SHX Text

APPROVED

AutoCAD SHX Text

DESIGN

AutoCAD SHX Text

DESIGN

AutoCAD SHX Text

DRAWN

AutoCAD SHX Text

BAR BELOW IS ONE INCH

AutoCAD SHX Text

ON ORIGINAL DRAWING

AutoCAD SHX Text

PROJECT

AutoCAD SHX Text

NUMBER

AutoCAD SHX Text

DATE:

AutoCAD SHX Text 11/02/2025

AutoCAD SHX Text

OREM, UT 84097

AutoCAD SHX Text

OREM CITY CEMETERY

AutoCAD SHX Text 1520 N 800 E

AutoCAD SHX Text

SHEET

AutoCAD SHX Text

DRAWING NO.

AutoCAD SHX Text

YYY

AutoCAD SHX Text

R. JACOBSEN

AutoCAD SHX Text

R. JACOBSEN

AutoCAD SHX Text

IRRIGATION DESIGN

AutoCAD SHX Text

ORIGINAL SHEET SIZE

18" MIN.

Jacobsen Irrigation Jacobsen Irrigation Design

AutoCAD SHX Text

REMOTE CONTROL VALVE

AutoCAD SHX Text

3/4" MINUS WASHED GRAVEL

AutoCAD SHX Text

SCH 80 FITTINGS

AutoCAD SHX Text

SCH 40 PIPE & FITTINGS

AutoCAD SHX Text

PAIGE WIRE CONNECTORS (2)

AutoCAD SHX Text

FINISH GRADE

AutoCAD SHX Text

STANDARD VALVE BOX (ONE VALVE PER)

AutoCAD SHX Text

ACTION MANIFOLD FITTINGS (2 EACH) 18011-X, 18012-X

AutoCAD SHX Text

CONTROL WIRE

AutoCAD SHX Text

SCALE: NTS

AutoCAD SHX Text D3

AutoCAD SHX Text

REMOTE CONTROL VALVE

AutoCAD SHX Text

SECTION DETAIL

AutoCAD SHX Text

MAIN LINE PIPE

AutoCAD SHX Text

LASCO G13S-212 SWING JOINT

AutoCAD SHX Text

QUICK COUPLER VALVE W/ 1" KEY & UPTURNED GARDEN VALVE

AutoCAD SHX Text

FINISH GRADE

AutoCAD SHX Text

10" ROUND VALVE BOX

AutoCAD SHX Text

MAIN LINE TEE OR ELL

AutoCAD SHX Text

3/4' MINUS GRAVEL

AutoCAD SHX Text D2

AutoCAD SHX Text

QUICK COUPLER VALVE

AutoCAD SHX Text

SECTION DETAIL

AutoCAD SHX Text

MAIN LINE PIPE

AutoCAD SHX Text

3/4" CURB STOP VALVE LEEMCO LCT-075-SS-316

AutoCAD SHX Text

3/4" SCH 40 STREET ELL

AutoCAD SHX Text

FINISH GRADE

AutoCAD SHX Text

IRRICAP

AutoCAD SHX Text

2" SCH 40 PIPE

AutoCAD SHX Text

MARLEX STREET ELL

AutoCAD SHX Text

1 CU/FT 3/4" GRAVEL

AutoCAD SHX Text

3/4" X 6" S/80 NIPPLE

AutoCAD SHX Text

CARSON BROOKS 10" ROUND BOX

AutoCAD SHX Text

SCALE: NTS

AutoCAD SHX Text C2

AutoCAD SHX Text

MANUAL DRAIN VALVE-SMALL

AutoCAD SHX Text

SECTION DETAIL

AutoCAD SHX Text

SCALE: NTS

AutoCAD SHX Text

LEEMCO D/I R/W VALVE

AutoCAD SHX Text

MAIN LINE PIPE

AutoCAD SHX Text

3/4" WASHED GRAVEL

AutoCAD SHX Text

6" CL/200 SLEEVE

AutoCAD SHX Text

10" CARSON BROOKS ROUND VALVE BOX

AutoCAD SHX Text

FINISH GRADE

AutoCAD SHX Text

SCALE: NTS

AutoCAD SHX Text C1

AutoCAD SHX Text

LARGE ISOLATION/LINE VALVE

AutoCAD SHX Text

SECTION DETAIL

AutoCAD SHX Text

FINISH GRADE

AutoCAD SHX Text

ROTOR HEAD

AutoCAD SHX Text

S/40 PVC LATERAL PIPE

AutoCAD SHX Text

SWING JOINT; 3 MARLEX STR 90, 12" NIPPLE

AutoCAD SHX Text

S/40 S X T TEE OR ELBOW

AutoCAD SHX Text

SCALE: 3" = 1'-0"

AutoCAD SHX Text E1

AutoCAD SHX Text

POP UP ROTOR HEAD

AutoCAD SHX Text

SECTION DETAIL

AutoCAD SHX Text NOTES: **INDICATES COMPONENT SHALL BE SAME SIZE AS LARGEST LATERAL ON THIS MANIFOLD. DOWNSTREAM OF BALL VALVE: MANIFOLD FITTINGS SHALL BE S/80, PVC PIPE SHALL BE S/40. QUICK COUPLERS ARE NOT REQUIRED AT EVERY MANIFOLD. SEE PLAN FOR LOCATIONS.

AutoCAD SHX Text

FLOW

AutoCAD SHX Text

FLOW

AutoCAD SHX Text

FLOW

AutoCAD SHX Text

S/40 COUPLER OR BELL END

AutoCAD SHX Text

**S/80 TOE NIPPLE

AutoCAD SHX Text

DRIP ZONE, JUMBO VALVE BOX

AutoCAD SHX Text

ACTION MANIFOLD FITTINGS

AutoCAD SHX Text

**S/40 MANIFOLD MAIN LINE

AutoCAD SHX Text

LASCO SNAPLOK SWING JOINT

AutoCAD SHX Text

QUICK COUPLER IN 10" ROUND BOX

AutoCAD SHX Text

RCV IN CARSON STANDARD 1419 VALVE BOX

AutoCAD SHX Text

**S/80 FITTINGS

AutoCAD SHX Text

DUCTILE IRON LATERAL TEE & LATERAL VALVE. 10" ROUND BOX

AutoCAD SHX Text

SCALE: NTS

AutoCAD SHX Text D1

AutoCAD SHX Text

VALVE MANIFOLD

AutoCAD SHX Text

PLAN VIEW DETAIL

AutoCAD SHX Text F1

AutoCAD SHX Text

SAMPLE CEMETERY BLOCK

AutoCAD SHX Text

PLAN VIEW

AutoCAD SHX Text

SCALE: NTS

AutoCAD SHX Text

AutoCAD SHX Text 18'

AutoCAD SHX Text 20'

AutoCAD SHX Text

NORTH

AutoCAD SHX Text TYPICAL CEMETERY BLOCK, 18'X20 TYPICAL GRAVE SPACE, 40" X 104" 16" GAP BETWEEN GRAVES / VAULTS. ALL LATERALS & HEADS TO BE PLACED IN THESE AREAS.

AutoCAD SHX Text

AutoCAD SHX Text NOTES: ALL LAYOUT OF EQUIPMENT, WIRE, PIPE SHALL BE DONE WITH CEMETERY SEXTON APPROVAL PRIOR TO INSTALLATION.

AutoCAD SHX Text

LI201

AutoCAD SHX Text

DETAILS

AutoCAD SHX Text

REVIEW

AutoCAD SHX Text

REVISIONS

AutoCAD SHX Text

NO.

AutoCAD SHX Text

DATE

AutoCAD SHX Text

DESCRIPTION

AutoCAD SHX Text

REV. BY

AutoCAD SHX Text 25-000

AutoCAD SHX Text

CHECKED

AutoCAD SHX Text

APPROVED

AutoCAD SHX Text

DESIGN

AutoCAD SHX Text

DESIGN

AutoCAD SHX Text

DRAWN

AutoCAD SHX Text

BAR BELOW IS ONE INCH

AutoCAD SHX Text

ON ORIGINAL DRAWING

AutoCAD SHX Text

PROJECT

AutoCAD SHX Text

NUMBER

AutoCAD SHX Text

DATE:

AutoCAD SHX Text 11/02/2025

AutoCAD SHX Text

OREM, UT 84097

AutoCAD SHX Text

OREM CITY CEMETERY

AutoCAD SHX Text 1520 N 800 E

AutoCAD SHX Text

SHEET

AutoCAD SHX Text

DRAWING NO.

AutoCAD SHX Text

YYY

AutoCAD SHX Text

R. JACOBSEN

AutoCAD SHX Text

R. JACOBSEN

AutoCAD SHX Text

IRRIGATION DESIGN

AutoCAD SHX Text

ORIGINAL SHEET SIZE

883"

F12

83.23" F13

883"

F15

883"

F16

83.23"

F17

883"

F18

883"

F19

883"

662"

883"

662"

F10

883"

F11

883"

F20

662"

83.23"

662"

883"

882"

F29

883"

F28

662"

SEE SHEET LI-101

SEE SHEET LI-102

S E

E S

H E

E T

-1

E E

S H

E E

-1

S E

E S

H E

E T

-1

E E

S H

E E

-1

F27

883" F26

883"

F25

883"

F24

883"

F23

883"

F22

83.23"

F21

883"

662"

883"

F14

883"

CONTROLLER IS ACTUALLY 125'

SOUTHWEST OF THIS LOCATION,

NEAR ENTRY TO CEMETERY, NOT

SHOWN ON THIS PLAN. IT HAS

ADEQUATE STATIONS FOR ALL

'F' LABELLED ZONES. RUN NEW

WIRES TO EXISTING CONTROLLER.

EXISTING 'FLAG' POC MAIN LINE

LOCATED APPROXIMATELY HERE.

4" IN SIZE, EITHER S/40 OR CL/200

PVC PIPE. CONTRACTOR TO

POTHOLE AND VERIFY.

EXISTING 'SHED' POC MAIN LINE

LOCATED APPROXIMATELY HERE.

4" IN SIZE, EITHER S/40 OR CL/200

PVC PIPE. CONTRACTOR TO

POTHOLE AND VERIFY.

CONTROLLER 'S' IS ACTUALLY 225'

NORTH & WEST OF THIS LOCATION,

INSIDE OF BRICK BUILDING, NOT

SHOWN ON THIS PLAN. IT HAS

ADEQUATE STATIONS FOR ALL

'S' LABELLED ZONES. RUN NEW

WIRES TO EXISTING CONTROLLER.

883"

662"

NORTH

0 feet40

1" = 20'

20 60 80

AutoCAD SHX Text

AutoCAD SHX Text 1 "14"

AutoCAD SHX Text 2"

AutoCAD SHX Text 1 "14"

AutoCAD SHX Text 2"

AutoCAD SHX Text 2 "12"

AutoCAD SHX Text 1 "14"

AutoCAD SHX Text 2"

AutoCAD SHX Text 2 "12"

AutoCAD SHX Text 1 "14"

AutoCAD SHX Text 2"

AutoCAD SHX Text 2 "12"

AutoCAD SHX Text 1 "14"

AutoCAD SHX Text 2"

AutoCAD SHX Text 2 "12"

AutoCAD SHX Text 1 "14"

AutoCAD SHX Text 2"

AutoCAD SHX Text 2 "12"

AutoCAD SHX Text 2"

AutoCAD SHX Text 2 "12"

AutoCAD SHX Text 1 "14"

AutoCAD SHX Text 2"

AutoCAD SHX Text

AutoCAD SHX Text 3"

AutoCAD SHX Text 1 "14"

AutoCAD SHX Text 3"

AutoCAD SHX Text 2 "12"

AutoCAD SHX Text 3"

AutoCAD SHX Text

AutoCAD SHX Text 3"

AutoCAD SHX Text 1 "14"

AutoCAD SHX Text 2 "12"

AutoCAD SHX Text 1 "14"

AutoCAD SHX Text 2 "12"

AutoCAD SHX Text 1 "14"

AutoCAD SHX Text 2"

AutoCAD SHX Text 1 "14"

AutoCAD SHX Text 2"

AutoCAD SHX Text 2 "12"

AutoCAD SHX Text 3"

AutoCAD SHX Text 1 "14"

AutoCAD SHX Text 2"

AutoCAD SHX Text 2 "12"

AutoCAD SHX Text 3"

AutoCAD SHX Text 1 "14"

AutoCAD SHX Text 2"

AutoCAD SHX Text 2 "12"

AutoCAD SHX Text 1 "14"

AutoCAD SHX Text 2"

AutoCAD SHX Text 2 "12"

AutoCAD SHX Text 1 "14"

AutoCAD SHX Text 2"

AutoCAD SHX Text 2 "12"

AutoCAD SHX Text 1 "14"

AutoCAD SHX Text 2"

AutoCAD SHX Text 1 "14"

AutoCAD SHX Text 2"

AutoCAD SHX Text 1 "14"

AutoCAD SHX Text 2 "12"

AutoCAD SHX Text 1 "14"

AutoCAD SHX Text 3"

AutoCAD SHX Text 2"

AutoCAD SHX Text 1 "14"

AutoCAD SHX Text 2 "12"

AutoCAD SHX Text 2"

AutoCAD SHX Text 1 "14"

AutoCAD SHX Text 2"

AutoCAD SHX Text 1 "14"

AutoCAD SHX Text 2"

AutoCAD SHX Text 2 "12"

AutoCAD SHX Text 1 "14"

AutoCAD SHX Text 2"

AutoCAD SHX Text 2 "12"

AutoCAD SHX Text 1 "14"

AutoCAD SHX Text 3"

AutoCAD SHX Text 2 "12"

AutoCAD SHX Text 2"

AutoCAD SHX Text 1 "14"

AutoCAD SHX Text 3"

AutoCAD SHX Text 2"

AutoCAD SHX Text 1 "14"

AutoCAD SHX Text 3"

AutoCAD SHX Text 2 "12"

AutoCAD SHX Text 1 "14"

AutoCAD SHX Text 2"

AutoCAD SHX Text 1 "14"

AutoCAD SHX Text 3"

AutoCAD SHX Text 2"

AutoCAD SHX Text 1 "14"

AutoCAD SHX Text 2"

AutoCAD SHX Text 3"

AutoCAD SHX Text 1 "14"

AutoCAD SHX Text 2"

AutoCAD SHX Text 1 "14"

AutoCAD SHX Text 3"

AutoCAD SHX Text 2"

AutoCAD SHX Text 1 "14"

AutoCAD SHX Text 2"

AutoCAD SHX Text 3"

AutoCAD SHX Text 2"

AutoCAD SHX Text 1 "14"

AutoCAD SHX Text F

AutoCAD SHX Text S

AutoCAD SHX Text 2"

AutoCAD SHX Text 1 "14"

AutoCAD SHX Text 3"

AutoCAD SHX Text 2"

AutoCAD SHX Text 1 "14"

AutoCAD SHX Text 2"

AutoCAD SHX Text 1 "14"

AutoCAD SHX Text 3"

AutoCAD SHX Text 2 "12"

AutoCAD SHX Text 3"

AutoCAD SHX Text 1 "14"

AutoCAD SHX Text 3"

AutoCAD SHX Text 2 "12"

AutoCAD SHX Text 3"

AutoCAD SHX Text 2"

AutoCAD SHX Text 1 "14"

AutoCAD SHX Text 2 "12"

AutoCAD SHX Text 2"

AutoCAD SHX Text 3"

AutoCAD SHX Text 2 "12"

AutoCAD SHX Text 1 "14"

AutoCAD SHX Text 2 "12"

AutoCAD SHX Text 3"

AutoCAD SHX Text 1 "14"

AutoCAD SHX Text 3"

AutoCAD SHX Text

AutoCAD SHX Text 2"

AutoCAD SHX Text 1 "14"

AutoCAD SHX Text A

AutoCAD SHX Text

FLAG

AutoCAD SHX Text

SHED

AutoCAD SHX Text A

AutoCAD SHX Text 4"

AutoCAD…

This is the start of the file's text. The full file is on GovTribe.

File details come from the government source that posted it. Updated May 1, 2026.