52.212-5 Addendum .docx

DOCX document 15 KB Posted

Attached to
PCD 992 Miramar National Cemetery Furniture -- 7110
Solicitation number
QSE--36C78624Q50311
Issued by

About this file

This document is an addendum to the FAR 52.212-1 Instructions to Offerors-Commercial Items for a federal contract opportunity. The key details are:

The contract opportunity is for office furniture and installation services at the Miramar National Cemetery in San Diego, CA. It is a total Service-Disabled Veteran-Owned Small Business (SDVOSB) set-aside, with a Lowest Price Technically Acceptable (LPTA) evaluation approach. Offerors must be certified through the SBA Veteran Small Business Certification. Submissions are due by 3pm EST on June 25, 2024 and must be emailed to the Contracting Specialist. A site visit will not be conducted, but vendors can submit questions by June 20, 2024. The government anticipates awarding a firm-fixed price services contract with no option years. Evaluation factors include lead time, with 6-8 weeks being considered technically acceptable, compliance with the Buy American Act, and adherence to size/color specifications. Offerors must submit a price schedule, subcontracting plan (if applicable), quality control/inspection plan, and technical approach.

View the file

Other files

File Type Posted
36C78624Q50201 Questions and Answers (002).docx DOCX document
36C78624Q50201 Solicitation Provisions.pdf PDF
Solicitation.pdf PDF
QSE 36C78624Q50311.pdf PDF
Miramar NC Furniture Req.pdf PDF

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

ADDENDUM to FAR 52.212-1 INSTRUCTIONS TO OFFERORS—COMMERCIAL ITEMS

QUOTATION PREPARATION INSTRUCTIONS

A. To assure timely and equitable evaluation of quotes, contractors must follow the instructions contained herein. Contractors are required to meet all solicitation requirements, including terms and conditions, representations and certifications, and technical requirements, in addition to those identified as evaluation factors or sub-factors. Failure to meet a requirement may result in a quote being ineligible for award. Contractors must clearly identify any exception to the solicitation terms and conditions and provide complete accompanying rationale.

B. The contracting officer has determined there is a high probability of adequate price competition in this acquisition. Upon examination of the initial quotes, the contracting officer will review this determination and if, in the contracting officer's opinion, adequate price competition exists no additional cost information will be requested. However, if at any time during this competition the contracting officer determines that adequate price competition no longer exists; contractors may be required to submit information to the extent necessary for the contracting officer to determine the reasonableness and affordability of the price.

C. This solicitation is being issued as Lowest Price Technically Acceptable (LPTA). An award will be made using LPTA procedures. Quotes will be ranked in order of price and only the low price will be evaluated for technical acceptance. If the offer is technically acceptable, the evaluation will stop there.

D. Specific Instructions:

Contractors are required to submit items below in addition to a signed SF1449. Failure to submit items below will be rated unfavorably in comparison to a contractor who has submitted the items. If contractor is not proposing a subcontracting plan, this should be stated in the response. Additional details regarding submission items are as follows:

Price – The Contractor must complete price schedule by providing the unit amount and total amount. See submission checklist below

Subcontracting Plan – A small business subcontracting plan is not required, however, if contractor plans to subcontract then contractor must indicate the percentage of work that will be subcontracted out and what responsibilities of the prime contractor and sub-contractor. See submission checklist below

Quality Control / Inspection Plan – The Contractor must submit a narrative, not to exceed five pages, that details how the Contractor will adhere to the terms and conditions of the performance work statement throughout a five-year performance period to include at a minimum, a contract inspection/management methodology. See submission checklist below

Technical Plan / Methodologies – Concise and well-written description not to exceed five pages (resumes are considered as part of page count), in Contractor’s own words, explaining methodology to be used in providing all tasks and services to be supplied within the contract in accordance with the Statement of Work (SOW). Plans which include relevant key personnel and duties performed; resumes of key personnel; site manager’s qualifications, (i.e., training, experience, certifications, licenses, and alternate site manager’s qualifications are recommended. See submission checklist below

Submission checklist

X

Signed 1449

Completed price schedule

Provide Supplier Information

Provide Lead Time with Price Schedule

File details come from the government source that posted it. Updated .