5180-01-499-8353 Drawing.pdf

This is a Special Packaging Instruction document (DD Form 2169, OMB No. 0704-0188) issued by the U.S. Army Tank-Automotive and Armaments Command (TACOM) in Warren, Michigan for a Direct Support (DS) Special Tools kit.

The document specifies detailed packaging and preservation requirements for kit drawing package stock number 5180-01-499-8353, CAGE code 19207, part number 57K4590, which pertains to the M1120 HEMTT-LHS vehicle. The kit contains 11 components including pressure gauges, adapters, flow meters, regulators, valves, hose assemblies, nipples, plugs, and nuts. Preservation must follow MIL-STD-2073-1D Method 40 with CODE 1 cleaning and MIL-STD-2073-1D drying standards. All items must be cleaned and dried before preservative application, with corrosion-susceptible items coated using contact preservatives consistent with item use and speedy deprocessing. Items require waterproof barrier bags to provide Method 40 protection, with cushioning applied inside and outside the bags to prevent damage during transport. All kit items must be consolidated into one applicatable unit container. Marking instructions require each segregated package to be identified with segregated package numbers on unit containers per MIL-STD-129, with a packing list attached detailing items within each segregated package. Containers must conform to either ASTM-D6251 Type III, Class 1 plywood boxes (not exceeding 1000 pounds) for Level A, or ASTM-D5118 Type CF, Class WR containers for Level B, with specifications for pallet configurations and maximum gross weight of 4000 pounds. The document was initially released on April 18, 2003, and includes a Revision A approved on September 7, 2005.