5166217f_Redacted.pdf

This is a technical drawing specification document for a cushion component. The document presents detailed engineering drawings with dimensional specifications, material requirements, and manufacturing notes for a distribution enclosure assembly.

The specification includes requirements for cushion manufacturing and assembly processes. Key notes specify that cushion sections may be laminated and bonded together with bond cushion in accordance with drawing 5371-6410805. Laminations must be parallel to the surface indicated. The document requires stencil markings in contrasting colors at specified positions using 25-50 inch characters, with options for either stencil ink or paint application per stencil requirements. Anti-static closed cell foam is the preferred material, with an alternative option to use anti-static solution on standard closed cell foam in accordance with specified standards. If drawing 10001-3641188 is used, all surfaces require sufficient conductive coating to meet maximum voltage buildup of 2.0 kilovolts. The technical drawings show multiple views with precise measurements in inches, including cross-sectional details, dimensional callouts, and assembly references. The document includes a revision control table tracking engineering changes and drawing specifications. This appears to be a manufacturing specification for a protective cushion component used in equipment enclosures, with emphasis on electrostatic protection and proper material composition.