51409801 data.pdf
PDF 286 KB Posted
- Attached to
- VALVE BODY Federal contract opportunity
- Solicitation number
- SPMYM225Q1966
About this file
The document is a QA-4 Material Ordering Data sheet for copper alloy castings. It specifies the procurement of 5 machined copper alloy castings (UNS C96400) using ASTM B369/369M-24 standard, with drawing number DWG 6404977 Rev E. The material ordering data includes detailed chemical composition requirements, with copper at 67.0% and nickel at 30.0%, and optional supplementary requirements such as witness inspection, certification, foundry test report, product marking, weldability test, and approval of weld procedure and repair records. The document was prepared by Gavin Fredrichs with code 260M and includes supplementary requirements for referenced documents, weld repair, quality assurance, product marking, and preparation for delivery.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| AMENDED SOLICITATION SPMYM225Q1966.pdf | ||
| 51409800 data.pdf | ||
| SOLICITATION SPMYM225Q1966.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
QA-4 MATERIAL ORDERING DATA
IDN (JML Doc #): N4523A 5140-9801
ICN: 82ST125001 KO: S01 KOI: 001
Generic Material Type: Copper Alloy, Cast, UNS C96400
Paragraph Ordering Data: Section 5
A. ASTM B369/369M – 24, Standard Specification for Copper-Nickel Alloy Castings, dated 01 July
B. Quantity of castings: 5 (ea.) Pc-23 C. Copper Alloy UNS Number (Table 2): C96400
D. Pattern or drawing number: DWG 6404977 Rev E Condition (as-cast, machined, and so forth): Machined
E. ASME Boiler and Pressure Vessel Code Requirements: No F. When material is purchased for agencies of the U.S. Government, the Supplementary
Requirements of this specification may be specified G. The following are optional and should be specified in the purchase order when required:
☐ Pressure test or soundness requirements (Specification B824)
☒ Witness inspection (Specification B824)
☒ Certification (Specification B824)
☒ Foundry test report (Specification B824)
☒ Product marking (Specification B824)
☒ Weldability test
☒ Approval of weld procedure and records of repairs
QA-4 MATERIAL ORDERING DATA
H. Supplementary Requirements
☒ S1 – Referenced Documents
☐ S2 – Soundness
☐ S3 – Pressure Test
☒ S4 – Weld repair
☒ S5 – Quality Assurance
☒ S6 – Product Marking
☒ S7 – Preparation for Delivery
S7.1 – Preservation, packaging, and packing is required
S7.2 – Marking to be IAW contract marking clause and this spec
Prepared By: Gavin Fredrichs
Code: 260M
File details come from the government source that posted it. Updated .